I've got a Linksys EtherFast 10/100 PCMCIA card I'm trying to get working
with an IBM ThinkPad 600.  Here's what comes up on the probe:


pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 3
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia0: CIS version PCMCIA 2.0 or 2.1
pcmcia0: CIS info: Linksys, EtherFast 10/100 PC Card (PCMPC100), 
pcmcia0: Manufacturer code 0x149, product 0xc1ab
pcmcia0: function 0: network adapter, ccr addr 400 mask 1
pcmcia0: function 0, config table entry 16: I/O card; irq mask befc; iomask 5, iospace 0-1f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pcmcia0: function 0, config table entry 1: I/O card; irq mask befc; iomask a, iospace 300-31f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pcmcia0: function 0, config table entry 2: I/O card; irq mask befc; iomask a, iospace 320-33f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pcmcia0: function 0, config table entry 3: I/O card; irq mask befc; iomask a, iospace 340-35f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pcmcia0: function 0, config table entry 4: I/O card; irq mask befc; iomask a, iospace 380-39f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pcmcia0: function 0, config table entry 5: I/O card; irq mask befc; iomask a, iospace 200-21f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pcmcia0: function 0, config table entry 6: I/O card; irq mask befc; iomask a, iospace 220-23f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pcmcia0: function 0, config table entry 7: I/O card; irq mask befc; iomask a, iospace 240-25f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
ne0 at pcmcia0 function 0 port 0x340-0x34f port 0x350-0x35f
ne0: Linksys Combo EthernetCard Ethernet
ne0: Ethernet address aa:aa:aa:aa:aa:aa
pcmcia1 at pcic0 controller 0 socket 1
pcmcia1: CIS version PCMCIA 2.0 or 2.1
pcmcia1: CIS info: 3Com Corporation, 3C589D, TP/BNC LAN Card Ver. 2a, 000002
pcmcia1: Manufacturer code 0x101, product 0x589
pcmcia1: function 0: network adapter, ccr addr 10000 mask 3
pcmcia1: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel
pcmcia1: function 0, config table entry 3: I/O card; irq mask ffff; iomask 4, iospace 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel
ep0 at pcmcia1 function 0 port 0x330-0x33f: 3Com 3c589 10Mbps Ethernet
ep0: address 00:00:86:1b:46:84, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep0: 10baseT, 10base5/AUI, 10base2/BNC (default 10baseT)

(ep0 was left in to show that it works OK)

This was from October 31st sources, but the same thing happens from sources
supped today.  

Is it safe to assume that the Linksys card is unsupported?  Is this
something anyone is working on?  Is there anything I can do, bearing in
mind that I have no documentation on the card, and little in the way of
driver-coding experience?

Thanks,
+j


-- 
Jeff Rizzo                                         http://boogers.sf.ca.us/~riz