I've been having a problem with a Tulip card (it's a NetGear something
or another.)  The system is 1.3.1, and there are two Tulips installed.

Basically, a lot of the time at boot I get:

de0 at pci0 dev9 function 0: can't read ENET ROM (why=-3) (ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
de0: 21140A [10-100Mb/s] pass 2.2
de0: address unknown

So, I was wondering if anyone else has been experiencing this, and
whether there is a nice explanation..

Full dmesg:

Copyright (c) 1996, 1997 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.3.1 (PORTICO) #0: Thu Jul 30 12:40:22 PDT 1998
    elric@arioch:/usr/Portico/NetBSD-1.3.1/src/sys/arch/i386/compile/PORTICO
cpu0: family 5 model 6 step 2
cpu0: AMD K6 (586-class)
real mem  = 33161216
avail mem = 31326208
using 430 buffers containing 1761280 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7100 (rev. 0x01)
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x8086 product 0x7110 (rev. 0x01)
vendor 0x8086 product 0x7111 (IDE mass storage, interface 0x80, revision 0x01) at pci0 dev 7 function 1 not configured
vendor 0x8086 product 0x7112 (USB serial bus, revision 0x01) at pci0 dev 7 function 2 not configured
vendor 0x8086 product 0x7113 (miscellaneous bridge, revision 0x01) at pci0 dev 7 function 3 not configured
de0 at pci0 dev 9 function 0: can't read ENET ROM (why=-3) (ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
de0: 21140A [10-100Mb/s] pass 2.2
de0: address unknown
vendor 0x5333 product 0x8a01 (VGA display, revision 0x01) at pci0 dev 10 function 0 not configured
de1 at pci0 dev 11 function 0
de1: interrupting at irq 12
de1: 21140A [10-100Mb/s] pass 2.2
de1: address 00:40:05:41:79:65
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
wd0 at wdc0 drive 0: <FUJITSU MPB3032ATU>
wd0: 3093MB, 6704 cyl, 15 head, 63 sec, 512 bytes/sec
wd0: using 16-sector 16-bit pio transfers, lba addressing
wdc1 at isa0 port 0x170-0x177 irq 15
atapibus1 at wdc1
cd0 at atapibus1 drive 0: <LTN242F, , QL12> type 5 cdrom removable
npx0 at isa0 port 0xf0-0xff: using exception 16
vt0 at isa0 port 0x60-0x6f irq 1
vt0: unknown s3, 80 col, color, 8 scr, mf2-kbd, [R3.32]
vt0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
biomask c040 netmask d040 ttymask d042
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
de1: enabling 100baseTX port


 == Roland
 == http://www.imrryr.org/~elric/