I'm trying to install 1.3 onto a colleague's tadpole laptop
	(Hes currently suffering NT and would be greatly helped by this)
	All seems to work, execpt the 3C589 keeps dying - it just stops
	sending data (probably receiving as well).

	'ifconfig ep0 down;ifconfig ep0 up' clears it, until it
	dies again (usually a minute or so later).

	Have tried fiddling with the hardware to use irq11 (just hangs
	the interface), and irqs 9 and 7 - aformentioned problems,

	Running spray from the machine to a non responsive host does
	not cause any problems, so it looks to be when receiving...

	Does anyone have any idea on how to investigate this?
	The card works fine under Windows NT (of course :(

	GENERIC kernel panics when it probes the wss (irq10), but
	problem occurs on INSTALL and below custom kernel.

		David/absolute

		"Its the coat. Chicks dig the coat."
		"No, its the tails. _Everyone_ digs the tails..."

Copyright (c) 1996, 1997 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.3 (_TADPOLE_) #0: Thu Feb 19 01:26:08 PST 1998
    root@angst.anim.dreamworks.com:/usr/src/sys/arch/i386/compile/_TADPOLE_
cpu0: family 5 model 2 step 5
cpu0: Intel Pentium (P54C) (586-class)
real mem  = 133816320
avail mem = 129601536
using 2822 buffers containing 12288000 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 2
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82434LX/NX PCI, Cache and Memory Controller (PCMC) (rev. 0x11)
ncr0 at pci0 dev 1 function 0: ncr 53c810 fast10 scsi
ncr0: interrupting at irq 10
ncr0: minsync=25, maxsync=206, maxoffs=8, 16 dwords burst, normal dma fifo
ncr0: single-ended, open drain IRQ driver
ncr0: restart (scsi reset).
scsibus0 at ncr0: 8 targets
sd0 at scsibus0 targ 3 lun 0: <IBM, DPRS-21215    !, S61B> SCSI2 0/direct fixed
sd0: sd0(ncr0:3:0): 10.0 MB/s (100 ns, offset 8)
1160MB, 2358 cyl, 16 head, 63 sec, 512 bytes/sect x 2376864 sectors
cd0 at scsibus0 targ 4 lun 0: <TOSHIBA, CD-ROM XM-3701TA, 0236> SCSI2 5/cdrom removable
probe(ncr0:4:1): 4.0 MB/s (250 ns, offset 8)
pcib0 at pci0 dev 2 function 0
pcib0: Intel 82378ZB System I/O (SIO) (rev. 0x03)
Cirrus Logic CL-GD6729 (PCMCIA bridge, revision 0xff) at pci0 dev 3 function 0 not configured
Cirrus Logic CL-GD6729 (PCMCIA bridge, revision 0xff) at pci0 dev 3 function 1 not configured
Cirrus Logic CL-GD6729 (PCMCIA bridge, revision 0xff) at pci0 dev 3 function 2 not configured
Cirrus Logic CL-GD6729 (PCMCIA bridge, revision 0xff) at pci0 dev 3 function 3 not configured
Cirrus Logic CL-GD6729 (PCMCIA bridge, revision 0xff) at pci0 dev 3 function 4 not configured
Cirrus Logic CL-GD6729 (PCMCIA bridge, revision 0xff) at pci0 dev 3 function 5 not configured
Cirrus Logic CL-GD6729 (PCMCIA bridge, revision 0xff) at pci0 dev 3 function 6 not configured
Cirrus Logic CL-GD6729 (PCMCIA bridge, revision 0xff) at pci0 dev 3 function 7 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns8250 or ns16450, no fifo
npx0 at isa0 port 0xf0-0xff: using exception 16
vt0 at isa0 port 0x60-0x6f irq 1
vt0: wd90c00, 80 col, color, 8 scr, mf2-kbd, [R3.32]
pms0 at vt0 irq 12
vt0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 5
pcic0: controller 0 (Cirrus PD672X) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
pcmcia1: CIS version 2.0 or 2.01
pcmcia1: CIS info: 3Com Corporation, 3C589D, TP/BNC LAN Card Ver. 2a, 000002
pcmcia1: Manufacturer code 0x101, product 0x589
pcmcia1: function 0: network adapter, ccr addr 10000 mask 3
pcmcia1: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel
pcmcia1: function 0, config table entry 3: I/O card; irq mask ffff; iomask 4, iospace 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel
ep0 at pcmcia1 function 0 port 0x330-0x33f: 3Com 3C589 Ethernet
ep0: MAC address 00:60:97:89:d2:e0
ep0: 8KB byte-wide FIFO, 5:3 Rx:Tx split, utp/aui/bnc (default utp)
pcmcia2 at pcic0 controller 1 socket 0
pcmcia3 at pcic0 controller 1 socket 1
biomask 440 netmask 440 ttymask 1462
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
pcmcia1: card irq 7