Hello,

I just installed 1.3/i386 to my noname laptop (i586MMX-166, PCI BIOS
SiS-510X 1.01.26). There were no problemos besides PCMCIA detection.

I'm not sure if NetBSD detected my PCMCIA correctly, but it didn't detect
3Com etherlink III PCMCIA ethernet adapter (adapter works with Windows NT on
same laptop, so this seems to be detection issue, I guess).

Boot message dump follows (it does look like PCI - PCMCIA bridge, I think):

Copyright (c) 1996, 1997 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.3 (notebook.lane) #3: Thu Feb 12 01:41:05 PST 1998
    lane@banaani:/usr/src/sys/arch/i386/compile/notebook.lane
cpu0: family 5 model 4 step 3
cpu0: Intel Pentium/MMX (586-class)
real mem  = 33157120
avail mem = 30961664
using 430 buffers containing 1761280 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
Silicon Integrated System 85C501 (host bridge) at pci0 dev 0 function 0 not configured
Silicon Integrated System 85C503 (ISA bridge, revision 0x01) at pci0 dev 1 function 0 not configured
Silicon Integrated System 85C601 (IDE mass storage, revision 0x01) at pci0 dev 1 function 1 not configured
Trident Microsystems TGUI 9660 (VGA display, revision 0xd3) at pci0 dev 6 function 0 not configured
Omega Micro product 0x1221 (PCMCIA bridge, revision 0x02) at pci0 dev 13 function 0 not configured
Omega Micro product 0x1221 (PCMCIA bridge, revision 0x02) at pci0 dev 14 function 0 not configured
isa0 at mainbus0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37b irq 7
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
wd0 at wdc0 drive 0: <IBM-DTNA-22160>
wd0: 2067MB, 4200 cyl, 16 head, 63 sec, 512 bytes/sec
wd0: using 16-sector 16-bit pio transfers, lba addressing
wdc1 at isa0 port 0x170-0x177 irq 15
atapibus1 at wdc1
cd0 at atapibus1 drive 0: <CD-220E, , 1.0C> type 5 cdrom removable
sb0 at isa0 port 0x220-0x237 irq 7 drq 1: dsp v3.01
audio0 at sb0
npx0 at isa0 port 0xf0-0xff: using exception 16
vt0 at isa0 port 0x60-0x6f irq 1
vt0: unknown trident, 80 col, color, 8 scr, mf2-kbd, [R3.32]
vt0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 5
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
pcmcia2 at pcic0 controller 1 socket 0
pcmcia3 at pcic0 controller 1 socket 1
biomask c040 netmask c040 ttymask c0e2
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

Should kernel configuration file contain definition for PCI - PCMCIA bridge
or is my mistake somewhere else?

Thank you.

-- 
Sami Laine
		To reply via mail, remove 'no.spam.' from my address.