On Mon, Feb 09, 1998 at 03:58:18PM +0100, Manuel Bouyer wrote:
> Could you please send me the dmesg of this machine, and the ifconfig commands
> you typed ? If you can run some tests, we should be able to fix the
> problem.
> 

Here's the ifconfig stuff:

# ifconfig tl0 10.1.1.2 up
ifconfig: SIOCGIFFLAGS tl0: Device not configured
# ifconfig tl1 10.1.1.2 up
ifconfig: SIOCGIFFLAGS tl1: Device not configured
# ifconfig -a
ne1: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        address: 00:40:05:2f:37:ea
        media: manual
        inet 204.152.80.97 netmask 0xffffff00 broadcast 204.152.80.255
lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 32976
        inet 127.0.0.1 netmask 0xff000000 
ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 576
        inet 204.145.147.35 --> 204.145.147.1 netmask 0xffffff00 
tun0: flags=10<POINTOPOINT> mtu 1500
tun1: flags=10<POINTOPOINT> mtu 1500

Here's dmesg:

Copyright (c) 1996, 1997 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.3 (STORM13) #0: Sun Feb  1 04:18:26 PST 1998
    root@storm:/usr/src/sys/arch/i386/compile/STORM13
cpu0: Cyrix 6x86 (486-class)
real mem  = 83492864
avail mem = 80224256
using 1044 buffers containing 4276224 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82437VX System Controller (TVX) (rev. 0x02)
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371SB PCI-to-ISA Bridge (PIIX3) (rev. 0x01)
Intel 82371SB IDE Interface (PIIX3) (IDE mass storage, interface 0x80) at pci0 d
ev 7 function 1 not configured
S3 ViRGE (VGA display, revision 0x06) at pci0 dev 18 function 0 not configured
ppb0 at pci0 dev 19 function 0: IBM 82351 PCI-PCI Bridge (rev. 0x01)
pci1 at ppb0 bus 1
tl0 at pci1 dev 0 function 0
tl0: Compaq Dual Port Netelligent 10/100 TX
tl0: Ethernet address 00:80:5f:e6:ee:24
tl0: interrupting at irq 11
tl0: no mii configured
tl1 at pci1 dev 1 function 0
tl1: Compaq Dual Port Netelligent 10/100 TX
tl1: Ethernet address 00:80:5f:e6:ee:a4
tl1: interrupting at irq 10
tl1: no mii configured
isa0 at pcib0
ne1 at isa0 port 0x300-0x31f irq 4
ne1: NE2000 Ethernet
ne1: Ethernet address 00:40:05:2f:37:ea
com1 at isa0 port 0x2f8-0x2ff irq 9: ns16550a, working fifo
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
wd0 at wdc0 drive 0: <Maxtor 71260 AT>
wd0: 1204MB, 2448 cyl, 16 head, 63 sec, 512 bytes/sec
wd0: using 16-sector 16-bit pio transfers, lba addressing
npx0 at isa0 port 0xf0-0xff: using exception 16
vt0 at isa0 port 0x60-0x6f irq 1
vt0: unknown s3, 80 col, color, 8 scr, mf2-kbd, [R3.32]
spkr0 at vt0 port 0x61

Thanks,
Scott

-- 
Scott Smith
scott@lackluster.net

Mail received via UUCP, read with Mutt, and composed with vi on NetBSD-1.3.