Hi -

  I have run into a problem with a Megahertz ethernet card
model CC10BT and an IBM Thinkpad 755C (model 9545).

  The Thinkpad itself is happy with 1.3, but it'd be nice
to use the two PCMCIA cards I have, if possible.  

  Below is the message buffer from an almost generic
kernel.  I config lo0 right after init starts, then
I run:

	ifconfig sm1 media utp 130.228.11.234 netmask 0xffffffe0

I get the "pcmcia0: card irq 7" message, the text on the
screen changes colour from white to yellow, and I get 
"sm1: device timeout" errors whenever I try to xmit a packet.

  I've tried adjusting the PCIC_ISA_ALLOC_IOBASE and the
PCIC_ISA_INTR_ALLOC_MASK to see if that would help.
Adjusting the IOBASE/IOSIZE parameters eliminates the
sm1:device timeout message and the screen colour change,
but no matter what I've done, I cannot get traffic moving
through the interface. :(

  (I've also tried getting rid of the modem card, which
also doesn't work, same effect :(  )

  Any pointers or tips for debugging this greatly appreciated.

	Sean.
- --
Copyright (c) 1996, 1997 The NetBSD Foundation
, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.3 (SMDBOX) #0: Sun Jan 25 18:00:54 CET 1998
    smd@sean.ebone.net:/usr/src/sys/arch/i386/compile/SMDBOX
cpu0: family 4 model 8 step 0
cpu0: Intel 486DX4 (486-class)
real mem  = 20574208
avail mem = 18141184
using 276 buffers containing 1130496 bytes of memory
mainbus0 (root)
isa0 at mainbus0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
lptprobe: mask ff data 55 failed
lptprobe: mask ff data 55 failed
lpt2 at isa0 port 0x3bc-0x3bf: polled
sea0: board type unknown at address 0xc8000
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
wd0 at wdc0 drive 0: <IBM-H2344-A4>
wd0: 328MB, 915 cyl, 15 head, 49 sec, 512 bytes/sec
wd0: using 16-sector 16-bit pio transfers, chs addressing
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pms0 at pc0 irq 12
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 3
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia0: CIS version 2.0 or 2.01
pcmcia0: CIS info: Megahertz, CC10BT/2, PCMCIA 10BASE-T/2 ETHERNET ADAPTER, 0000
860094C9
pcmcia0: Manufacturer code 0x128, product 0x103
pcmcia0: function 0: network adapter, ccr addr 300 mask 1
pcmcia0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, io
space 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel
pcmcia0: function 0, config table entry 3: I/O card; irq mask ffff; iomask 5, io
space 0-1f; rdybsy_active wp_active bvd_active io8 io16 irqlevel
sm1 at pcmcia0 function 0 port 0x3c0-0x3cf: Megahertz X-JACK Ethernet
sm1: unknown chip id 0, revision 0
sm1: MAC address 00:00:86:00:94:c9, default media AUI
pcmcia1 at pcic0 controller 0 socket 1
pcmcia1: CIS version 2.0 or 2.01
pcmcia1: CIS info: MEGAHERTZ, XJ1144, A5, PCMCIA MODEM
pcmcia1: Manufacturer code 0x102, product 0x5
pcmcia1: function 0: multi-function, ccr addr 100 mask 1
pcmcia1: function 0, config table entry 32: I/O card; irq mask 3c; iomask 0, ios
pace 3f8-3ff; rdybsy_active wp_active bvd_active io8 irqlevel
pcmcia1: function 0, config table entry 33: I/O card; irq mask 3c; iomask 0, ios
pace 2f8-2ff; rdybsy_active wp_active bvd_active io8 irqlevel
pcmcia1: function 0, config table entry 34: I/O card; irq mask 3c; iomask 0, ios
pace 3e8-3ef; rdybsy_active wp_active bvd_active io8 irqlevel
pcmcia1: function 0, config table entry 35: I/O card; irq mask 3c; iomask 0, ios
pace 2e8-2ef; rdybsy_active wp_active bvd_active io8 irqlevel
com3 at pcmcia1 function 0 port 0x2f8-0x2ff: ns16550a, working fifo
pcmcia1: card irq 5
biomask 4040 netmask 4040 ttymask 504a
boot device: fd0
root device (default fd0a): wd0a
dump device (default wd0b): 
file system (default generic): 
root on wd0a dumps on wd0b
mountroot: trying ffs...
root file system type: ffs
init: copying out flags `-s' 3
init: copying out path `/sbin/init' 11
pcmcia0: card irq 7
<3>sm1: device timeout
<3>sm1: device timeout
<3>sm1: device timeout
<3>sm1: device timeout
<3>sm1: device timeout
<3>sm1: device timeout
<3>sm1: device timeout
<3>sm1: device timeout
<3>sm1: device timeout
<3>sm1: device timeout
<3>sm1: device timeout
<3>sm1: device timeout
<3>sm1: device timeout
<3>sm1: device timeout
<3>sm1: device timeout
<3>sm1: device timeout
<3>sm1: device timeout
<3>sm1: device timeout