Hi all,

I recently (last night) down-loaded the floppy image for NetBSD 1.3
for the i386.  The file I got was boot.fs.gz.

When I try to boot my machine with this floppy, I get errors
associated with the adaptec controller driver.  Basically, ahc1 reports
timeout errors.  This machine boots and runs fine under 1.2.1.  Does
anyone know of some obvious thing that I'm missing?  Below, I've included
dmesg output from the 1.2.1 boot sequence to provide the information
on the types of chip, controller, and devices I have installed on this
machine.  Note that I have both a SCSI dat drive and a SCSI CD-ROM
installed on this machine.  There is also a pnp Soundblaster card that
is not recognized by the 1.2.1 boot sequence.

Any help would be appreciated,
Allan


==========1.2.1 dmesg output below ==============
NetBSD 1.2.1 (ALLAN_PENT) #7: Wed May 14 11:47:31 MDT 1997
    root@linum.nmsu.edu:/usr/src/sys/arch/i386/compile/ALLAN_PENT
CPU: Pentium (GenuineIntel 586-class CPU)
real mem  = 67698688
avail mem = 61423616
using 852 buffers containing 3489792 bytes of memory
mainbus0 (root)
isa0 at mainbus0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37f irq 7
ed2 at isa0 port 0x300-0x31f irq 10
ed2: address 00:c0:f0:1a:67:e7, type NE2000 (16-bit)
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
spkr0 at pc0 port 0x61
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pci0 at mainbus0 bus 0: configuration mode 1
vendor 0x1106 product 0x0576 (class bridge, subclass host, revision 0x02) at pci0 dev 0 function 0 not configured
vendor 0x1002 product 0x4354 (class display, subclass VGA, revision 0x0a) at pci0 dev 8 function 0 not configured
ahc1 at pci0 dev 9 function 0
ahc1: interrupting at irq 11
ahc1: aic7870 Single Channel, SCSI Id=7, 16 SCBs
scsibus0 at ahc1
ahc1: target 0 synchronous at 10.0MHz, offset = 0xf
sd0 at scsibus0 targ 0 lun 0: <MICROP, 4421-07   0502SJ, 0502> SCSI2 0/direct fixed
sd0: 2047MB, 4049 cyl, 7 head, 147 sec, 512 bytes/sec
ahc1: target 1 synchronous at 3.6MHz, offset = 0xf
st0 at scsibus0 targ 1 lun 0: <ARCHIVE, Python 25501-XXX, 2.96> SCSI2 1/sequential removable
st0: drive empty
ahc1: target 2 synchronous at 10.0MHz, offset = 0x8
cd0 at scsibus0 targ 2 lun 0: <TOSHIBA, CD-ROM XM-5701TA, 0167> SCSI2 5/cdrom removable
biomask 840 netmask c40 ttymask cda
changing root device to sd0a
/dev/sd0a: file system not clean; please fsck(8)

-- 
Allan E. Strand                Internet:   stranda@cofc.edu
Department of Biology          Phone:      (803) 953-8085
College of Charleston          Fax:        (803) 953-5453
Charleston, SC 29424