here's the serial console message as it boots see the error at last few =
lines

=20
--------HPCBOOT--------
 CPU: SH7709A
MemoryManager: LockPages
FileManager: FAT
Memory Bank:
[0] 0x0c000000 size 0x02000000
[1] 0x0e000000 size 0x02000000
GetVersionEx
Windows CE 2.11
GetSystemInfo:
wProcessorArchitecture      0x4
dwPageSize                  0x400
dwAllocationGranularity     0x00010000
dwProcessorType             0x2713
wProcessorLevel             0x3
wProcessorRevision          0x0
Display: 640x240 8bpp
DEBUG BIT: ................................ [0x00000000] 0
open file "\Storage Card2\miniroot.fs"(4194304 byte).
open file "\Storage Card2\netbsd.gz"(700227 byte).
Loader: COFF
file size: text 0x117bb0 + data 0x7710 =3D 0x11f2c0 byte
address translation table 5376 pages.(43008 byte)
allocated 5376 page. mapped 5376 page.
2nd bootloader address U0: 0x005dfc00 P1: 0x8ce4e800
[text] ->load 0x8c001000+0x00117bb0=3D0x8c118bb0 =
ofs=3D0x000000d0+0x117bb0
[data] ->load 0x8c118bb0+0x00007710=3D0x8c1202c0 ofs=3D0x00117c80+0x7710
[bss ] ->load 0x8c1202c0+0x000396b4=3D0x8c159974 ofs=3D0x00000000+0x0
[zero clear] ->0x8c1202c0+0x000396b4=3D0x8c159974
open file "\Storage Card2\miniroot.fs"(4194304 byte).
[file system image] ->load 0x8c15a000+0x00400000=3D0x8c55a000 =
ofs=3D0x00000000+0x400000
load link 5330 zero clear link 1.
kernel entry address: 0x8c001000
framebuffer: 640x240 type=3D5 linebytes=3D1280 addr=3D0xb2000000
console =3D 3
boot arg: 0x8ce4e400 stack: 0x8ce4e200
Booting kernel...
option [0]: netbsd.gz

option [1]: h

option [2]: v

option [3]: m=3Dminiroot.fs

option [4]: root=3D/dev/md0

platid(cpu/machine) =3D 08108000/02c20101

display=3D640x240-(1280) 0xb2000000 type=3D5=20

search D-RAM from 0x0c55a000 for 0x0e000000

mem_cluster_cnt =3D 2

mem_clusters[0] =3D {0xc000000+0x55a000 <0xc55a000}

mem_clusters[1] =3D {0xc55a000+0xaa6000 <0xd000000}

total memory =3D 16Mbyte

nkpde =3D 8

proc0 stack: 0x8c55ef94

loading 0xc568000,0xa98000

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001

    The NetBSD Foundation, Inc.  All rights reserved.

Copyright (c) 1982, 1986, 1989, 1991, 1993

    The Regents of the University of California.  All rights reserved.



NetBSD 1.5T (RAMDISK) #0: Sun Mar 25 02:27:37 JST 2001

    =
uch@alexandrite.rfe.nop.or.jp:/work/cvsrep/syssrc/sys/arch/hpcsh/compile/=
RAMDISK

total memory =3D 16384 KB

avail memory =3D 9552 KB

using 230 buffers containing 920 KB of memory

HP Jornada 680 (Hitachi SH7709A)

mainbus0 (root)

bivideo0 at mainbus0: pseudo video controller

bivideo0: framebuffer address: 0xb2000000

hpcfb0 at bivideo0: hpcrasops 640x240 pixels, 65536 colors, 80x24 chars: =
multi

wsdisplay0 at hpcfb0

wsdisplay0: screen 0 added (std, vt100 emulation)

shb0 at mainbus0

scif0 at shb0 port 0xa4000008-0xa4000017 irq 12

scif0: console

hd64461if0 at shb0 irq 4

--------------------------------[hd64461_info]---------------------------=
-----

STBCR (System Control Register)

CKIO_STBY[_] SAFECKE_IST[x] SLCKE_IST[_] SAFECKE_OST[x] SLCKE_OST[_] =
SMIAST[x] SLCDST[_] SPC0ST[x] SPC1ST[_] SAFEST[x] STM0ST[x] STM1ST[_] =
SIRST[x] SURTSD[x]=20

SYSCR (System Configuration Register)

SCPU_BUS_IGAT[_] SPTA_IR[_] SPTA_TM[x] SPTB_UR[_] WAIT_CTL_SEL[_] =
SMODE1[_] SMODE0[_]=20

SCPUCR (CPU Data Bus Control Register)

SPDSTOF[_] SPDSTIG[_] SPCSTOF[_] SPCSTIG[_] SPBSTOF[_] SPBSTIG[_] =
SPASTOF[_] SPASTIG[_] SLCDSTIG[_] SCPU_CS56_EP[_] SCPU_CMD_EP[_] =
SCPU_ADDR_EP[_] SCPDPU[_] SCPU_A2319_EP[_]=20



NIRR (Interrupt Request Register)

PCC0R[_] PCC1R[_] AFER[_] GPIOR[_] TMU0R[_] TMU1R[_] IRDAR[_] UARTR[_]=20

NIMR (Interrupt Mask Register)

PCC0M[_] PCC1M[_] AFEM[x] GPIOM[x] TMU0M[x] TMU1M[x] IRDAM[x] UARTM[x]=20

-------------------------------------------------------------------------=
-------

hd64461video at hd64461if0 not configured

hd64461pcmcia0 at hd64461if0

-----------------------------[hd64461pcmcia_info]------------------------=
-----

[PCC0 memory and I/O card (SH3 Area 6)]

PCC0 Interface Status Register

P0READY[_] P0MWP[_] P0VS2[x] P0VS1[x] P0CD2[x] P0CD1[x] P0BVD2[_] =
P0BVD1[_]=20

PCC0 General Control Register

P0DRVE[_] P0PCCR[_] P0PCCT[_] P0VCC0[x] P0MMOD[x] P0PA25[_] P0PA24[_] =
P0REG[_]=20

PCC0 Card Status Change Register

P0SCDI[_] P0IREQ[x] P0SC[_] P0CDC[_] P0RC[_] P0BW[_] P0BD[_]=20

PCC0 Card Status Change Interrupt Enable Register

P0CRE[_] P0SCE[_] P0CDE[x] P0RE[_] P0BWE[_] P0BDE[_]=20

interrupt type: none

PCC0 Software Control Register

P0VCC1[x] P0SWP[_]=20

[PCC1 memory card only (SH3 Area 5)]

PCC1 Interface Status Register

P1READY[x] P1MWP[x] P1VS2[x] P1VS1[_] P1CD2[_] P1CD1[_] P1BVD2[x] =
P1BVD1[x]=20

PCC1 General Contorol Register

P1DRVE[x] P1PCCR[_] P1VCC0[_] P1MMOD[x] P1PA25[_] P1PA24[_] P1REG[_]=20

PCC1 Card Status Change Register

P1SCDI[_] P1CDC[_] P1RC[_] P1BW[_] P1BD[_]=20

PCC1 Card Status Change Interrupt Enable Register

P1CRE[_] P1CDE[x] P1RE[x] P1BWE[_] P1BDE[_]=20

PCC1 Software Control Register

P1VCC1[_] P1SWP[_]=20

[General Control]

PCC0 Output pins Control Register

P0DEPLUP[_] P0AEPLUP[_]=20

PCC1 Output pins Control Register

P1RST8MA[_] P1RST4MA[_] P1RAS8MA[_] P1RAS4MA[_]=20

PC Card General Control Register

PSSDIR[_] PSSRDWR[_]=20

-------------------------------------------------------------------------=
-------

pcmcia0 at hd64461pcmcia0

detect_card: remove

pcmcia1 at hd64461pcmcia0

detect_card: insert

_chip_socket_enable: enable channel 1

power_on: 3.3V card

_chip_socket_enable: OK.

_chip_mem_alloc: base 0xb4000000 size 0x400

_chip_mem_map: (attribute) 0xb4000000+0-> 0+0x400

_chip_mem_unmap: 0xb4000000-0x400

pcmcia1: CIS version PCMCIA 2.0 or 2.1

pcmcia1: CIS info: STI, Flash 5.0

pcmcia1: Manufacturer code 0x7, product 0x0

pcmcia1: function 0: fixed disk(ata), ccr addr 200 mask f

pcmcia1: function 0, config table entry 0: memory card; irq mask 0; =
memspace 0-7ff; rdybsy_active powerdown

pcmcia1: function 0, config table entry 1: I/O card; irq mask ffff; =
iomask 4, iospace 0-f; memspace 0-7ff; rdybsy_active io8 io16 irqshare =
irqpulse irqlevel powerdown

pcmcia1: function 0, config table entry 2: I/O card; irq mask 4000; =
iomask a, iospace 1f0-1f7 3f6-3f7; memspace 0-7ff; rdybsy_active io8 =
io16 irqshare irqpulse irqlevel powerdown

pcmcia1: function 0, config table entry 3: I/O card; irq mask 4000; =
iomask a, iospace 170-177 376-377; memspace 0-7ff; rdybsy_active io8 =
io16 irqshare irqpulse irqlevel powerdown

wdc0 at pcmcia1 function 0_chip_mem_alloc: base 0xb4000000 size 0x800

_chip_socket_enable: enable channel 1

power_on: 3.3V card

_chip_socket_enable: OK.

_chip_mem_alloc: base 0xb4000000 size 0x14

_chip_mem_map: (attribute) 0xb4000000+0x200-> 0x200+0x14

_chip_mem_map: (common) 0xb4000000+0-> 0x1000000+0x800

 memory mapped mode

wd0 at wdc0 channel 0 drive 0: <Hitachi CVM1.1.1>

wd0: drive supports 1-sector PIO transfers, LBA addressing

wd0: 122 MB, 978 cyl, 8 head, 32 sec, 512 bytes/sect x 250368 sectors

_chip_mem_unmap: 0xb4000200-0x14

hd64461gpio at hd64461if0 not configured

hd64461afe at hd64461if0 not configured

hd64461uart at hd64461if0 not configured

hd64461fir at hd64461if0 not configured

pfckbd0 at mainbus0

hpckbd0 at pfckbd0: no keymap.

wskbd0 at hpckbd0 mux 1

md0: internal 4096 KB image area

boot device: wd0

root on md0a dumps on md0b

WARNING: preposterous time in file system

readclock: 3/8/16/21/53/44(6)

WARNING: file system time much less than clock time

init: copying out path `/sbin/init' 11

Process (pid 1) got signal 4

Process (pid 1) got signal 4

Process (pid 1) got signal 4

Process (pid 1) got signal 4

Process (pid 1) got signal 4

Process (pid 1) got signal 4

Process (pid 1) got signal 4

Process (pid 1) got signal 4

Process (pid 1) got signal 4

Process (pid 1) got signal 4

Process (pid 1) got signal 4

Process (pid 1) got signal 4

Process (pid 1) got signal 4

Process (pid 1) got signal 4

Process (pid 1) got signal 4


so.... whats going on? i already have 256mb cf set up