Subject: Re: z50 Internal Modem Device Name
To: Benjamin David Sexson <bensexson@earthlink.net>
From: Jim Fleming <jim.fleming@moblcode.com>
List: port-hpcmips
Date: 11/20/2002 13:25:06
----- Original Message -----
From: "Jim Fleming" <jim.fleming@moblcode.com>
To: "Jim Fleming" <jim.fleming@moblcode.com>; "Benjamin David Sexson"
<bensexson@earthlink.net>; "Port-Hpcmips" <port-hpcmips@netbsd.org>
Sent: Wednesday, November 20, 2002 12:13 PM
Subject: Re: z50 Internal Modem Device Name


>
> ----- Original Message -----
> From: "Jim Fleming" <jim.fleming@moblcode.com>
> To: "Benjamin David Sexson" <bensexson@earthlink.net>; "Port-Hpcmips"
> <port-hpcmips@netbsd.org>
> Sent: Wednesday, November 20, 2002 11:57 AM
> Subject: Re: z50 Internal Modem Device Name
>
>
> >
> > ----- Original Message -----
> > From: "Benjamin David Sexson" <bensexson@earthlink.net>
> > To: "Port-Hpcmips" <port-hpcmips@netbsd.org>
> > Sent: Tuesday, November 19, 2002 8:49 PM
> > Subject: RE: z50 Internal Modem Device Name
> >
> >
> > > The modem uses a Rockwell RP336LD Modem Data Pump (I don't really know
> > what
> > > this means?).  I am guessing that this sends the data to the processor
> > which
> > > then emulates a UART.  So I guess it wouldn't be that easy to port a
> > > linmodem to NetBSD.  Anybody have any idea how to start making a
driver?
> > >
> > > Thanks Ben
> > >
> > > > -----Original Message-----
> > > > From: Thomas Miller [mailto:thomas.miller@lycos.com]
> > > > Sent: Thursday, November 14, 2002 6:29 PM
> > > > To: Benjamin David Sexson
> > > > Subject: RE: z50 Internal Modem Device Name
> > > >
> > > >
> > > > Hi,
> > > >
> > > > I am not certain I understand all this completely correctly, but . .
.
> > > >
> > > > One of the critical hardware items missing from a Winmodem is
> > > > something called a UART.  Winmodems work by shifting the
> > > > processing work from the UART to the central prucessing unit.
> > > >
> > > > When I saw ns6550a (or whatever) in the dmesg, I assumed that
> > > > this meant the modem was a "hardware" modem, because ns6550a is
> > > > the designation of a type of UART.
> > > >
> > > > Actually, however, it appears from the comments on the list the
> > > > NEC 4121 processor in the z50 has UART emulation built into the
> > > > hardware of the processor.  Therefore, there needs to be a
> > > > special driver written for this particular NEC chip so that the
> > > > NetBSD kernel can access the UART at a different address than
> > > > where the UART would be if the UART were a regular UART in a
> > > > "hardware" modem.  This driver would be different from the
> > > > Winmodem type driver because the Winmodem driver would provide
> > > > software UART emulation rather than simply accessing the VR4121
> > > > hardware UART at a different location than usual.
> > > >
> > > > Again I am not sure all this is correct, but hope it helps.
> > > > Until someone gets around to writing the driver, we have to use
> > > > pcmcia or external modems in our z50s.  My z50 works fine with
> > > > both types; you can pick one up for ten or twenty buscks on ebay.
> > > >
> > > > Kindest regards,
> > > >
> > > > Tom
> > > >
> > > > thomas.miller@lycos.com
> > > > (Thomas Miller)
> > > > (617) 248-8900
> > > >
> > > > Any following text may include a message which was added by Lycos
> > > > and which is not a communication from me.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > On Wed, 13 Nov 2002 20:38:10
> > > >  Benjamin David Sexson wrote:
> > > > >Is this one of the linmodem drivers? one of the LT drivers and how
do
> > you
> > > > >get it to work?
> > > > >
> > > > >> -----Original Message-----
> > > > >> From: port-hpcmips-owner@netbsd.org
> > > > >> [mailto:port-hpcmips-owner@netbsd.org]On Behalf Of Thomas Miller
> > > > >> Sent: Tuesday, November 12, 2002 7:51 PM
> > > > >> To: M. Warner Losh
> > > > >> Cc: port-hpcmips@netbsd.org
> > > > >> Subject: Re: z50 Internal Modem Device Name
> > > > >>
> > > > >>
> > > > >> On Tue, 12 Nov 2002 17:40:32
> > > > >>  M. Warner Losh wrote:
> > > > >> >
> > > > >> >The Vr4121 and Vr4111 docs have enough information to >write a
> > > > >> driver for this modem (if they use the one that's >mostly built
> > > > >> into the Vr41xx CPU), but no one has done so.
> > > > >>
> > > > >> Greg's kernel finds the modem:
> > > > >>
> > > > >> z50# dmesg | grep com0
> > > > >> com0 at vr4102ip0 addr 0x0c000000-0007:
> > > > >> ns16550a, working fifo
> > > > >>
> > > > >> When I saw the ns16550a I figured it ought to work.
> > > > >>
> > > > >>
> > > > >> __________________________________________________________
> > > > >> Outgrown your current e-mail service? Get 25MB Storage, POP3
> Access,
> > > > >> Advanced Spam protection with LYCOS MAIL PLUS.
> > > > >>
http://login.mail.lycos.com/brandPage.shtml?pageId=plus&ref=lmtplus
> > > > >>
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > > __________________________________________________________
> > > > Outgrown your current e-mail service? Get 25MB Storage, POP3 Access,
> > > > Advanced Spam protection with LYCOS MAIL PLUS.
> > > > http://login.mail.lycos.com/brandPage.shtml?pageId=plus&ref=lmtplus
> > > >
> > >
> > >
> > >
> >
> >
> >
>
>
>