On Fri, 28 Sep 2001, Warner Losh wrote:

> With both kernels I get the same problem: No screens found.  This is
> both as my normal user ID (imp) and as root.

did you rename the file as XF86Config-4? i just ran across this problem on
an Intel machine, you can also try:

startx -- -xf86config pathtofile/XF86Config

if:

XFree86 -xf86config

works (as root), then you should be OK... 

(note that i'm guessing here... this is for a  XFree86-4.0-based server,
not for pre-4.0 servers)...

hth...

> K
> I have a NEC MobileGear II R/430 (same as the NEC MobilePro 780,
> without the VGA option) with 32M of RAM.  I'm booting off a IBM
> 1G microdrive (which I like very much).
> 
> Enclosed please find the dmesg from my machine for the new kernel.  I
> didn't save the dmesg from the old kernel.  To my untrained eye, all
> the video devices are there as are the keyboard and mouse.
> 
> On a related note, is it possible to have multiple, virtual consoles?
> 
> Warner
> 
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
>     The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>     The Regents of the University of California.  All rights reserved.
> 
> NetBSD 1.5Y (GENERIC) #0: Fri Sep 28 03:44:18 MDT 2001
>     imp@flash.village.org:/hpcmips/imp/NetBSD/src/sys/arch/hpcmips/compile/GENERIC
> NEC MC-R430 (NEC VR4121 rev1.2 168.521MHz)
> total memory = 32768 KB
> avail memory = 27852 KB
> using 435 buffers containing 1740 KB of memory
> mainbus0 (root)
> cpu0 at mainbus0: NEC VR4100 CPU (0xc60) Rev. 6.0 with software emulated floating point Rev. 0.0
> cpu0: L1 cache: 16KB/16B instruction, 8KB/16B data, direct mapped
> cpu0: No L2 cache
> vrip0 at mainbus0
> vrbcu0 at vrip0 addr 0xb000000-0xb00001f
> vrbcu0: cpu 168.521MHz, bus 28.086MHz, ram 56.173MHz
> vrcmu0 at vrip0 addr 0xb000060-0xb00007f
> vrgiu0 at vrip0 addr 0xb000100-0xb00011f intr 8
> button1 at vrgiu0 port=3 id=13 active=high sense=edge
> pwctl0 at vrgiu0 port=46 id=0 on=1
> pwctl3 at vrgiu0 port=44 id=6 on=1
> com0 at vrip0 addr 0xc000000-0xc000007 intr 9: ns16550a, working fifo
> vrrtc0 at vrip0 addr 0xb0000c0-0xb0000df intr 2
> vrkiu0 at vrip0 addr 0xb000180-0xb00019f intr 7
> hpckbd0 at vrkiu0
> wskbd0 at hpckbd0 (mux 1 ignored for console): console keyboard
> vrpmu0 at vrip0 addr 0xb0000a0-0xb0000bf intr 1
> vrpmu: Deadman's switch detected
> vrdsu0 at vrip0 addr 0xb0000e0-0xb0000e7
> vrled0 at vrip0 addr 0xb000240-0xb00024f intr 17
> vrpiu0 at vrip0 addr 0xb000120-0xb0002bf intr 5
> wsmouse0 at vrpiu0 mux 0
> mqvideo0 at vrip0 addr 0xa000000-0xa7fffff: MQ200 Rev.00 video controller, console
> mqvideo0: framebuffer address: 0xaa180100
>   PLL1: 47.001MHz(0x0e98292a, 12.288MHzx153/ 40)
>   PLL2: 30.021MHz(0x00d60a30, 12.288MHzx215/ 88)
>   PLL3: disable
>    MEM: 30.021MHz(PLL2)
>     GE: 30.021MHz(PLL2)
>    GC1: disable
>    GC2: 18.800MHz(PLL1/2.5/1), FP
> hpcfb0 at mqvideo0: 640x240 pixels, 65536 colors, 80x24 chars
> wsdisplay0 at hpcfb0: console (std, vt100 emulation), using wskbd0
> vrc4172pwm0 at vrip0 addr 0x15003880-0x15003885
> vrisab0 at vrgiu0: ISA port 0x14000000-0x18000000 mem 0x10000000-0x14000000
> isa0 at vrisab0
> pcic0 at isa0 port 0x3e0-0x3e1 iomem 0x70000-0x73fff irq 589827
> pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
> pcic0: controller 1 (Intel 82365SL Revision 1) has socket A only
> pcmcia0 at pcic0 controller 0 socket 0
> pcmcia1 at pcic0 controller 0 socket 1
> pcmcia at pcic0 controller 1 socket 0 not configured
> btnmgr0 at mainbus0
> wskbd1 at btnmgr0 mux 1
> hpcapm0 at mainbus0: pseudo power management module
> apmdev0 at hpcapm0: Power Management spec V1.2
> pcic0: using irq 589827 for socket events
> wdc1 at pcmcia0 function 0 port 0x14000300-0x1400030f
> wd0 at wdc1 channel 0 drive 0: <IBM-DSCM-11000>
> wd0: drive supports 16-sector PIO transfers, LBA addressing
> wd0: 1027 MB, 2088 cyl, 16 head, 63 sec, 512 bytes/sect x 2104704 sectors
> boot device: wd0
> root device (default wd0a): 
> dump device (default wd0b): 
> file system (default generic): 
> root on wd0a dumps on wd0b
> pcmcia0: card irq 3
>