Hi there,

i successfully compiled -CURRENT for hpcarm and put it on a CF Card. It 
seems to boot quite fine at first, but hangs. Here's the log:

--------HPCBOOT--------
FileManager
[1] vaddr 0xc0271010 file size 0x995c mem size 0x671c0 

[1] 0xc8000000 size 0x0800
         ->load 0xc0271010+0x000671c0=0xc02d81d0 ofs=0x00231010+0x995c 

[3] 0xd8000000 size 0x08000000
[zero clear] ->0xc027a96c+0x0005d864=0xc02d81d0ws CE 3.0
GetSystemInfo:
load link 566 zero clear link 1. 0x5
kernel entry address:
     The NetBSD Foundation, Inc.  All rights reserved.
Reg13:0a000000
Reg14:94b
Copyright (c) 1982, 1986, 1989, 1991, 1993
open file "\Speicherkarte\netbsd"(26
     The Regents of the University of California.  All rights reserved.F 

file size: +0x229010+0x995c = 0x234000 byte

NetBSD 2.99.10 (JORNADA720) #0: Sun Oct 17 19:07:02 CEST 2004es.(4608 
byte)
         root@leela.blah.int:/usr/obj/sys/arch/hpcarm/compile/JORNADA720
2nd bootloader vaddr=0x0032f000 paddr
saost0 at saip0 addr 0x90000000-0x9000001f
[zero clear] ->0xc027a96c+0x0005d864=
saost0: SA-11x0 OS Timer
sacom0 at saip0 addr 0xd000d000-0xd000d023 intr 17
kernel entry address: 0xc00
sacom0: unknown SA11x0 UART
framebuffer: 640x
sacom0: consoleytes=0 addr=0x0
sacc0 at saip0 addr 0x40000000-0x40001fff
console = 2
sacc0: SA1111 rev 2.1le missing! ]
sacpcic0 at sacc0
kernsize=0
wsdisplay0 at hpcfb0 kbdmux 1
wsmux1: connecting to wsdisplay0
hpcfb: 640x240 pixels, 65536 colors, 80x24 chars
hpcfb: 640x240 pixels, 65536 colors, 80x24 chars
wsdisplay0: screen 0-1 added (std, vt100 emulation)
j720ssp0 at saip0 addr 0x80070000-0x800700ff
wskbd0 at j720ssp0 mux 1
wskbd0: connecting to wsdisplay0
wsmouse0 at j720ssp0 mux 0
ipl_bio=00020203 ipl_net=00020002 ipl_tty=00020002 ipl_vm=00020002
ipl_audio=00020002 ipl_imp=00020002 ipl_high=00020002 ipl_serial=00020002
clock: hz=100 stathz = 64
sacpcic0: card present
wdc0 at pcmcia1 function 0: <SanDisk, SDP, 5/3 0.6>
wdc0: i/o mapped mode
atabus0 at wdc0 channel 0
wd0 at atabus0 drive 0: <SanDisk SDCFB-512>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 488 MB, 993 cyl, 16 head, 63 sec, 512 bytes/sect x 1000944 sectors
wd0: drive supports PIO mode 4
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs <--- here it hangs.

Any ideas??

Thanks!
-D.