Hello,
after playing around with some precompiled kernel images i'm trying to get 
my self-compiled kernel to work, unfortunately without any success.
This is what I got so far:
--------HPCBOOT--------
File: FAT
Bank#0 0xc0000000 size 0x08000000
Bank#1 0xc8000000 size 0x08000000
Bank#2 0xd0000000 size 0x08000000
Bank#3 0xd8000000 size 0x08000000
[DISPLAY] 640x240 16bpp
frame buffer physical address: 0xa2400000
frame buffer length: 0x00080000
Reg0 :6901b118
Reg1 :c002327f
Reg2 :c002327f
Reg3 :00000001
Reg5 :c0023007
Reg6 :000e0020
Reg13:0a000000
Reg14:9dfddfcd
CPSR :400000df
open file "\Speicherkarte\netbsd.gz"(578700 byte).
Loader: ELF
file size: +0x2b2d0c+[(symbol block: header 564 string 68161 symbol 89296 
byte)
= 0x26948] = 0x2d9948 byte
address translation table 752 pages.(6016 byte)
allocated 752 page. mapped 752 page.
2nd bootloader vaddr=0x003df000 paddr=0xc1d25000
2nd bootloader copy done.
[0] vaddr 0xc0100000 file size 0x2b2d0c mem size 0x2e396c
        ->load 0xc0100000+0x002e396c=0xc03e396c ofs=0x00008000+0x2b2d0c
[zero clear] ->0xc03b2d0c+0x00030c60=0xc03e396c
        ->load 0xc03e396c+0x00000234=0xc03e3ba0
        ->load 0xc03e3ba0+0x00010a41=0xc03f45e1 ofs=0x002d113c+0x10a41
        ->load 0xc03f45e4+0x00015cd0=0xc040a2b4 ofs=0x002bb46c+0x15cd0
load link 734 zero clear link 1.
kernel entry address: 0xc0100000
framebuffer: 640x240 type=5 linebytes=1280 addr=0x48200000
console = 2
----
and the the machine hangs. The kernel entry address in netbsd-current is set 
to 0xc0040000, but neither with 0xc0040000 nor 0xc0100000 the kernel does 
not boot. What are suitable settings for a kernel configuration file? I took 
the original JORNADA720 and basically stripped off all that networking 
stuff. Is there an easy way to check my toolchain (some hello word example)?

Greetings,
Thomas

Greetings,
Thomas


_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp