I just got a Jornada 720 this morning from a good friend of mine.  I
grabbed the 20010630 kernel and put it on an 8MB CF card and booted
hpcboot.  then, with my 'ep0', netbooted to multi-user. Everything
is cool so far.

Except for the console.  Since I'm netbooting, it gives me the 
'root device?' bit so I have to type in ep0 and then everything 
proceeds to there.  As a result, I have 'serial console' checked
in hpcboot.

Without 'serial console' checked, I can't seem to get anything on the
display.  Is that to be expected?  It looks like there's framebuffer
code there and it looks like it should work..  I've tried using both
the "HP Jornada 720" and "-japanese" versions and no luck.

btw, I fixed a little spello too:  "infomation".

NetBSD 1.5W (JORNADA720) #493: Sat Jun 23 21:21:20 JST 2001
    toshii@kiku.my.domain:/usr/src/syssrc/sys/arch/hpcarm/compile/JORNADA720
total memory = 32768 KB
avail memory = 25644 KB
using 307 buffers containing 1740 KB of memory
mainbus0 (root)
cpu0 at mainbus0: SA-1110 rev 8 (SA-1 core) DC enabled IC enabled WB enabled EABT
saip0 at mainbus0
saost0 at saip0 addr 0x90000000-0x9000001f
saost0: SA-11x0 OS Timer
sacom0 at saip0 addr 0xd000d000-0xd000d023 intr 17
sacom0: unknown SA11x0 UART
sacom0: console
sacc0 at saip0 addr 0x40000000-0x40001fff
sacpcic0 at sacc0
pcmcia0 at sacpcic0
pcmcia1 at sacpcic0
sed0 at saip0
no frame buffer infomation.
j720ssp0 at saip0 addr 0x80070000-0x800700ff
wskbd0 at j720ssp0 mux 1
ipl_bio=00020002 ipl_net=00020002 ipl_tty=00020002 ipl_imp=00020002
ipl_audio=00020002 ipl_imp=00020002 ipl_high=00020002 ipl_serial=00020002
clock: hz=100 stathz = 64
md0: internal 256 KB image area
sacpcic0: card present
ep0 at pcmcia0 function 0: 3Com 3c574-TX 10/100Mbps Ethernet
ep0: address 00:50:da:53:60:8c, 64KB word-wide FIFO, 1:1 Rx:Tx split
OUI 0x00039c model 0x0014 rev 10 at ep0 phy 0 not configured
sacpcic0: card present
wdc0 at pcmcia1 function 0
wd0 at wdc0 channel 0 drive 0: <Hitachi CV 7.2.2>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 7872 KB, 246 cyl, 2 head, 32 sec, 512 bytes/sect x 15744 sectors
boot device: <unknown>
root device: ?
use one of: md0[a-h] ep0 wd0[a-h] halt reboot
root device: ep0
dump device: 
file system (default generic): 
root on ep0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 199.45.88.30
nfs_boot: my_name=herb.canuck.com
nfs_boot: my_domain=canuck.com
nfs_boot: my_addr=199.45.88.240
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=199.45.88.1
root on carpus.canuck.com:/home/hpeyerl/jornada
root file system type: nfs