Port-ews4800mips archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

current dmesg of EWS4800/360AD



Just for info that "this port is still alive..."

---

System coming up
ROM CODE 0x101F
R4400 CPU Test end
cache test end (primary I:  16KB D:  16KB secondary 1024KB)
memory initialize o...o... o...o... o...o... ........ end(0096MB)
R4400 MMU test end
I/O test end
ITF end of Normal mode

network address 00004C316D0E
  2:DISK 1 00000000     IPL start

[21B] NetBSD/ews4800mips >> boot

NetBSD/ews4800mips boot, Revision 0.1 (from NetBSD 4.99.70)
FD[x] DISK[x] NETWORK[x] COMPILED[_]
booted from Hard disk IPL unit 1
>> Press return to boot now, any other key for boot console.
booting sd1a:netbsd - starting 0
[non-interactive mode]
disk(1,0):/netbsd [partition=0, start sector=32490] (ufs)
3161440+312636 [198512+189079]=0x3af188
start=80000000 entry=80001000 nsym=1 sym=8035029c end=803af188
jump to kernel entry.(0x80001000)
kernel_text=0x80001000 edata=0x80303d60 end=0x8035029c sp=0x80000fb0
argc=2 argv=0xa09fffd0 syminfo=0xa09fff78
version=1 size=24 nsym=1 ssym=0x8035029c esym=0x803af188
[0] boot
[1] sd1a:netbsd
M0=32MB M1=32MB M2=32MB  total 96MB
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.70 (GENERIC) #62: Mon Jul 28 23:38:40 JST 2008
        tsutsui@mirage:/usr/src/sys/arch/ews4800mips/compile/GENERIC
NEC EWS4800/360AD (TR2A) 150MHz
total memory = 98304 KB
avail memory = 92116 KB
mainbus0 (root)
cpu0 at mainbus0: MIPS R4400 CPU (0x450) Rev. 5.0 with MIPS R4010 FPC Rev. 0.0
cpu0: 16KB/32B direct-mapped L1 Instruction cache, 48 TLB entries
cpu0: 16KB/16B direct-mapped write-back L1 Data cache
cpu0: 1024KB/128B direct-mapped write-back L2 Unified cache
sbdio0 at mainbus0
le0 at sbdio0 at 0x1e400000 irq 0: address 00:00:4c:31:6d:0e
le0: 32 receive buffers, 8 transmit buffers
zsc0 at sbdio0 at 0x1e440000 irq 4
zstty0 at zsc0 channel 0 (console i/o)
zstty1 at zsc0 channel 1
zsc1 at sbdio0 at 0x1e480000 irq 9
ewsms0 at zsc1 channel 0: baud rate 1200
wsmouse0 at ewsms0 mux 0
ewskbd0 at zsc1 channel 1: baud rate 4800
wskbd0 at ewskbd0 mux 1
mkclock0 at sbdio0 at 0x1e490000: mk48t18
osiop0 at sbdio0 at 0x1e500000 irq 6: NCR53C710 rev 2, 25MHz, SCSI ID 7
scsibus0 at osiop0: 8 targets, 8 luns per target
osiop1 at sbdio0 at 0x1e510000 irq 10: NCR53C710 rev 2, 25MHz, SCSI ID 7
scsibus1 at osiop1: 8 targets, 8 luns per target
fb0 at sbdio0 at 0xf0000000, 0xf5f00000
wsdisplay0 at fb0 kbdmux 1
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <HITACHI, DK315C-11, H7H6> disk fixed
sd0: 1053 MB, 2488 cyl, 15 head, 57 sec, 512 bytes/sect x 2157600 sectors
sd0: sync (160.00ns offset 8), 8-bit (6.250MB/s) transfers
sd1 at scsibus0 target 1 lun 0: <HITACHI, DK315C-11, H7H6> disk fixed
sd1: 1053 MB, 2488 cyl, 15 head, 57 sec, 512 bytes/sect x 2157600 sectors
sd1: sync (160.00ns offset 8), 8-bit (6.250MB/s) transfers
Kernelized RAIDframe activated
readdisklabel: no BSD disklabel.
readdisklabel: creating disklabel from VTOC.
root on sd1a dumps on sd1b
root file system type: ffs
Mon Jul 28 23:41:17 JST 2008
swapctl: adding /dev/sd1b as swap device at priority 0
Starting file system checks:
/dev/rsd1a: file system is clean; not checking
/dev/rsd1f: file system is clean; not checking
/dev/rsd1g: file system is clean; not checking
Setting tty flags.
Setting sysctl variables:
Starting network.
Hostname: cedia
NIS domainname: mydomain
IPv6 mode: host
Configuring network interfaces: le0.
add net default: gateway mirage
Adding interface aliases:
Building databases: dev, utmp, utmpx done
Starting syslogd.
Setting date via ntp.
Checking for core dump...
savecore: no core dump
Starting rpcbind.
Starting ypbind.
Mounting all filesystems...
Clearing temporary files.
Starting amd.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
Starting virecover.
Starting local daemons:.
Updating motd.
Starting ntpd.
Starting sshd.
postfix/postfix-script: starting the Postfix mail system
Starting inetd.
Starting cron.
Mon Jul 28 23:42:05 JST 2008

NetBSD/ews4800mips (cedia) (ttyZ0)

login: 

---
Izumi Tsutsui


Home | Main Index | Thread Index | Old Index