Port-cobalt archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

RE: Qube2700



Hi, I have 2 qubes, 1 with 3 disks and the other with 4, I´m using promise
ata cards in both machines but when the Qubes boot, at the end I have this
message on both

pdcide0:0:0: lost interrupt
        type: ata tc_bcount: 0 tc_skip: 0

Can somebody explain why this is happening, is there any way to fix this
issue???

Thanks


Claudio Leiva S
Las Vegas, Nevada
USA
http://cleiva.no-ip.com
(Powered by NetBSD for Cobalt)



-----Mensaje original-----
De: port-cobalt-owner%NetBSD.org@localhost 
[mailto:port-cobalt-owner%NetBSD.org@localhost] En
nombre de Izumi Tsutsui
Enviado el: martes, 18 de marzo de 2008 9:40
Para: port-cobalt%NetBSD.org@localhost
CC: tsutsui%ceres.dti.ne.jp@localhost
Asunto: Re: Qube2700

I wrote:

> I'll take up kernel part later. (it should be more trivial)

It's almost working though it looks there is some interrupt
race issue (serial output lockup on load) around there...

---
Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Fri Jun  5 10:42:59 PDT 1998

 1.LCD Test................................PASS
 2.Controller Test.........................PASS
 4.Flash Test..............................PASS
 5.Bank 0:.................................16M
 6.Bank 1:.................................16M
 7.Bank 2:.................................16M
 8.Bank 3:.................................16M
 9.Serial Test.............................PASS
10.PCI Expansion Slot....................**Unknown Card**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS

>> NetBSD/cobalt 4.99.55 Bootloader, Revision 0.8 [@0x80f00000]
>> (tsutsui@mirage, Sun Mar 16 18:57:45 JST 2008)
>> Model:               Cobalt Qube 2700
>> Memory:              65536 k
>> PROM boot string:    root=/dev/hda1 ro
Boot [wd0a:netbsd]: 
Loading: wd0a:netbsd
4521296+295616 [225920+217810]=0x504a70
Starting at 0x80001000

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.55 (COLT2700) #54: Wed Mar 19 00:41:33 JST 2008
        tsutsui@mirage:/usr/src/sys/arch/cobalt/compile/COLT2700
Cobalt Qube 2700
total memory = 65536 KB
avail memory = 58716 KB
mainbus0 (root)
cpu0 at mainbus0: QED RM5200 CPU (0x2810) Rev. 1.0 with built-in FPU Rev.
1.0
cpu0: 16KB/32B 2-way set-associative L1 Instruction cache, 48 TLB entries
cpu0: 16KB/32B 2-way set-associative write-back L1 Data cache
zsc0 at mainbus0 addr 0x1c800000 irq 4: optional Z85C30 serial port
zstty0 at zsc0 channel 0 (console i/o)
zstty1 at zsc0 channel 1
mcclock0 at mainbus0 addr 0x10000070: mc146818 compatible time-of-day clock
panel0 at mainbus0 addr 0x1f000000
gt0 at mainbus0 addr 0x14000000
pci0 at gt0
pchb0 at pci0 dev 0 function 0: Galileo GT-64011 System Controller, rev 1
tlp0 at pci0 dev 7 function 0: DECchip 21041 Ethernet, pass 2.1
tlp0: interrupting at level 2
tlp0: Ethernet address 00:10:e0:00:09:46
tlp0: 10baseT, 10baseT-FDX, 10base2, 10base5
pcib0 at pci0 dev 9 function 0
pcib0: VIA Technologies VT82C586 PCI-ISA Bridge, rev 39
viaide0 at pci0 dev 9 function 1
viaide0: VIA Technologies VT82C586 (Apollo VP) ATA33 controller
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
uhci0 at pci0 dev 9 function 2: VIA Technologies VT83C572 USB Controller
(rev. 0x02)
uhci0: can't map i/o space
puc0 at pci0 dev 10 function 0: I-O DATA RSA-PCI 2-port serial (com, com)
com1 at puc0 port 0: interrupting at irq 9
com1: ns16550a, working fifo
com2 at puc0 port 1: interrupting at irq 9
com2: ns16550a, working fifo
wd0 at atabus0 drive 0: <Maxtor 5T020H2>
wd0: 19073 MB, 38752 cyl, 16 head, 63 sec, 512 bytes/sect x 39062500 sectors
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
Tue Mar 18 16:29:29 UTC 2008
swapctl: adding /dev/wd0b as swap device at priority 0
Checking for botched superblock upgrades: done.
Starting file system checks:
/dev/rwd0a: file system is clean; not checking
/dev/rwd0f: file system is clean; not checking
/dev/rwd0g: file system is clean; not checking
Setting tty flags.
Setting sysctl variables:
Starting network.
Hostname: colt2700
IPv6 mode: host
Configuring network interfaces:.
Adding interface aliases:
Starting dhclient.
Internet Systems Consortium DHCP Client V3.0.3
Copyright 2004-2005 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP

Listening on BPF/tlp0/00:10:e0:00:09:46
Sending on   BPF/tlp0/00:10:e0:00:09:46
Sending on   Socket/fallback
DHCPREQUEST on tlp0 to 255.255.255.255 port 67
DHCPACK from 192.168.20.1
bound to 192.168.20.38 -- renewal in 5819 seconds.
Building databases...
Starting syslogd.
Checking for core dump...
savecore: /dev/wd0b: Device busy
Mar 18 16:29:49 colt2700 savecore: /dev/wd0b: Device busy
Mounting all filesystems...
Clearing /tmp.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
Starting virecover.
Starting local daemons:.
Updating motd.
postfix/postfix-script: starting the Postfix mail system
Starting paneld.
Starting inetd.
Starting cron.
Tue Mar 18 16:30:09 UTC 2008
Mar 18 16:30:12 colt2700 getty[538]: /dev/tty00: Device not configured

NetBSD/cobalt (colt2700) (ttyZ0)

login: 

---
Izumi Tsutsui


-- 
No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.519 / Virus Database: 269.21.7/1332 - Release Date: 3/17/2008
10:48 AM


No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.519 / Virus Database: 269.21.7/1332 - Release Date: 17/03/2008
10:48
 

No virus found in this outgoing message.
Checked by AVG. 
Version: 7.5.519 / Virus Database: 269.21.7/1334 - Release Date: 18/03/2008
20:52
 



Home | Main Index | Thread Index | Old Index