Greetings.

I have compiled the 1.5 kernel with PPP and IPSec and routing is not
working.

-- cut here ---

raq2: {1} dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5 (MYKERNEL) #3: Thu Feb 22 20:00:14 PST 2001
    petergun@raq2:/usr/src/sys/arch/cobalt/compile/MYKERNEL
32768 KB memory, 23516 KB free, 6480 KB in 1620 buffers
mainbus0 (root)
com0 at mainbus0 addr 0x1c800000 level 3: st16650a, working fifo
com0: console
cpu0 at mainbus0: QED RM5200 CPU (0x28a0) Rev. 10.0 with built-in FPU Rev.
10.0
cpu0: L1 cache: 32KB/32B instruction, 32KB/32B data, two way set associative
cpu0: No L2 cache
gt0 at mainbus0 addr 0x14000000 level 0
pci0 at gt0
pci0: i/o space, memory space enabled, rd/line, wr/inv ok
pchb0 at pci0 dev 0 function 0: Galileo GT-64111 System Controller, rev 1
tlp0 at pci0 dev 7 function 0: DECchip 21143 Ethernet, pass 4.1
tlp0: interrupting at level 1
tlp0: Ethernet address 00:10:e0:00:34:7d
lxtphy0 at tlp0 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Symbios Logic 53c860 (SCSI mass storage, revision 0x02) at pci0 dev 8
function 0 not configured
pcib0 at pci0 dev 9 function 0
pcib0: VIA Technologies VT82C586 (Apollo VP) PCI-ISA Bridge, rev 39
pciide0 at pci0 dev 9 function 1: VIA Tech VT82C586A IDE Controller (rev.
0x06)
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <Maxtor 91366U4>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 12982 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 26588016 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers)
pciide0: secondary channel configured to compatibility mode
pciide0: disabling secondary channel (no drives)
VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x02) at
pci0 dev 9 function 2 not configured
tlp1 at pci0 dev 12 function 0: DECchip 21143 Ethernet, pass 4.1
tlp1: interrupting at level 2
tlp1: Ethernet address 00:10:e0:00:34:73
lxtphy1 at tlp1 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
IPsec: Initialized Security Association Processing.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
raq2: {2} netstat -r
Routing tables
raq2: {3} netstat
netstat: kvm_read: Bad address

???
netstat: kvm_read: Bad address

???

-- cut here ---

I'm curious if anyone has got PPP at least to work ? Also, does the Anon CVS
contain any updates worth pursuing ?

Thanks,

Stephane