This is an informational post, everything that I havent allready posted is
here except for RaQ2 (non plus) and the cache qube, these will be
forthcoming when I can find them :)

ohh and of course the RaQ 3 isn't included because it is x86

-Stephen Harrell

NASRaQ

dmesg:
Loading R4000 MMU routines.
CPU revision is: 000028a0
Primary ICACHE 32K (linesize 32 bytes)
Primary DCACHE 32K (linesize 32 bytes)
ns16550: console I/O
Probing PCI hardware.
Calibrating delay loop.. ok - 249.86 BogoMIPS
Memory: 30788k/32764k available (1196k kernel code, 780k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP
Linux IP multicast router 0.07.
Appletalk 0.17 for Linux NET3.035
VFS: Diskquotas version dquot_5.6.0 initialized
Checking for 'wait' instruction...  available.
Linux version 2.0.34 (root@cjq2-b.cobaltnet.com) (gcc version 2.7.2) #1
Mon May 31 16:04:10 PDT 1999
Starting kswapd v 1.5 
Serial driver version 4.13 with no serial options enabled
tty00 at 0x1c800000 (irq = 7) is a 16550A
Real Time Clock Driver v1.09
Cobalt LCD Driver v2.10
loop: registered device at major 7
ide: Cobalt Networks IDE controller.
GAL CFG[00000003-->00000003]
    ide0: BM-DMA at 0x1000cc00-0x1000cc07
    ide1: BM-DMA at 0x1000cc08-0x1000cc0f
hda: WDC AC310200R, 9787MB w/512kB Cache, CHS=19885/16/63, UDMA
hdc: WDC AC310200R, 9787MB w/512kB Cache, CHS=19885/16/63, UDMA
ide0 at 0x100001f0-0x100001f7,0x100003f6 on irq 14
ide1 at 0x10000170-0x10000177,0x10000376 on irq 15
md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
ncr53c8xx: at PCI bus 0, device 8, function 0
ncr53c8xx: 53c860 detected 
ncr53c860-0: rev=0x02, base=0x2000, io_port=0x10102000, irq=4
ncr53c860-0: NCR clock is 80802KHz, 80074KHz
ncr53c860-0: ID 7, Fast-20, Parity Checking
ncr53c860-0: restart (scsi reset).
scsi0 : ncr53c8xx - revision 2.5f.1
scsi : 1 host.
scsi : detected total.
PPP: version 2.3.5 (demand dialling)
TCP compression code copyright 1989 Regents of the University of
California
PPP line discipline registered.
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
tulip.c:v0.76 4/22/97 becker@cesdis.gsfc.nasa.gov
eth0: DEC 21142 Tulip at 0x10100000, 00 10 e0 00 3a ac, IRQ 4
eth0: Old format EEPROM on 'Cobalt 27' board.  Using substitute media control info.
eth0: EEPROM default media type MII 10baseT.
eth0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
Partition check:
 hda: hda1 hda2 hda3 hda4
 hdc: hdc1 hdc2 hdc3 hdc4
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 130748k swap-space (priority -1)
Adding Swap: 130748k swap-space (priority -2)
Unknown md_ioctl 536873236
REGISTER_DEV hda4 to md0 done
REGISTER_DEV hdc4 to md0 done
Unknown md_ioctl 536873236
raid0 : Allocating 8 bytes for hash.
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
rs_close: bad serial port count; tty->count is 1, info->count is 0
sysctl: ip forwarding off
eth0: Using user-specified media MII.
eth0: Using user-specified media MII.


/proc/pci

PCI devices found:
  Bus  0, device   9, function  2:
    USB Controller: VIA Technologies VT 82C586 Apollo USB (rev 2).
      Medium devsel.  Master Capable.  Latency=22.  
      I/O at 0x300.
  Bus  0, device   9, function  1:
    IDE interface: VIA Technologies VT 82C586 Apollo IDE (rev 6).
      Medium devsel.  Fast back-to-back capable.  IRQ 14.  Master
Capable.  Latency=64.  
      I/O at 0xcc00.
  Bus  0, device   9, function  0:
    ISA bridge: VIA Technologies VT 82C586 Apollo ISA (rev 39).
      Medium devsel.  Master Capable.  No bursts.  
  Bus  0, device   8, function  0:
    SCSI storage controller: NCR 53c860 (rev 2).
      Medium devsel.  IRQ 4.  Master Capable.  Latency=64.  Min Gnt=8.Max
Lat=64.
      I/O at 0x10102000.
      Non-prefetchable 32 bit memory at 0x2000.
  Bus  0, device   7, function  0:
    Ethernet controller: DEC DC21142 (rev 65).
      Medium devsel.  Fast back-to-back capable.  IRQ 4.  Master
Capable.  Latency=64.  Min Gnt=20.Max
 Lat=40.
      I/O at 0x10100000.
      Non-prefetchable 32 bit memory at 0xffffec00.
  Bus  0, device   0, function  0:
    Memory: Unknown vendor Unknown device (rev 17).
      Vendor id=11ab. Device id=4146.
      Medium devsel.  Fast back-to-back capable.  Master
Capable.  Latency=64.  
      Non-prefetchable 32 bit memory at 0x1c000000.
      Non-prefetchable 32 bit memory at 0x1f000000.
      Non-prefetchable 32 bit memory at 0x14000000.
      I/O at 0x14000000.


CacheRaQ 2

dmesg
Loading R4000 MMU routines.
CPU revision is: 00002810
Primary ICACHE 16K (linesize 32 bytes)
Primary DCACHE 16K (linesize 32 bytes)
ns16550: console I/O
Probing PCI hardware.
Calibrating delay loop.. ok - 149.91 BogoMIPS
Memory: 31080k/32764k available (988k kernel code, 696k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP
Linux IP multicast router 0.07.
VFS: Diskquotas version dquot_5.6.0 initialized
Checking for 'wait' instruction...  available.
Linux version 2.0.34C52_SK (root@brainy.cobaltnet.com) (gcc version
2.7.2) #1 Tue Nov 30 18:14:40 PST 1999
Starting kswapd v 1.5 
Serial driver version 4.13 with no serial options enabled
tty00 at 0x1c800000 (irq = 7) is a 16550A
Real Time Clock Driver v1.09
Cobalt LCD Driver v2.10
ide: Cobalt Networks IDE controller.
GAL CFG[00000001-->00000003]
    ide0: BM-DMA at 0x1000cc00-0x1000cc07
    ide1: BM-DMA at 0x1000cc08-0x1000cc0f
hda: QUANTUM FIREBALL EL7.6A, 7339MB w/418kB Cache, CHS=15907/15/63, UDMA
ide0 at 0x100001f0-0x100001f7,0x100003f6 on irq 14
md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
scsi : 0 hosts.
scsi : detected total.
eth0: Digital DS21143 Tulip rev 65 at 0x10100000, 00:10:E0:00:0A:54, IRQ
4.
eth0: Old format EEPROM on 'Cobalt 27' board.  Using substitute media
control info.
eth0:  EEPROM default media type Autosense.
eth0:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
eth0:  MII transceiver #1 config 1000 status 7809 advertising 01e1.
Partition check:
 hda: hda1 hda2 hda3 hda4
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 102528k swap-space (priority -1)
Swansea University Computer Society IPX 0.34 for NET3.035
IPX Portions Copyright (c) 1995 Caldera, Inc.
Appletalk 0.17 for Linux NET3.035


/proc/pci

PCI devices found:
  Bus  0, device   9, function  2:
    USB Controller: VIA Technologies VT 82C586 Apollo USB (rev 2).
      Medium devsel.  Master Capable.  Latency=22.  
      I/O at 0x300.
  Bus  0, device   9, function  1:
    IDE interface: VIA Technologies VT 82C586 Apollo IDE (rev 6).
      Medium devsel.  Fast back-to-back capable.  IRQ 14.  Master
Capable.  Latency=64.  
      I/O at 0xcc00.
  Bus  0, device   9, function  0:
    ISA bridge: VIA Technologies VT 82C586 Apollo ISA (rev 39).
      Medium devsel.  Master Capable.  No bursts.  
  Bus  0, device   7, function  0:
    Ethernet controller: DEC DC21142 (rev 65).
      Medium devsel.  Fast back-to-back capable.  IRQ 4.  Master
Capable.  Latency=64.  Min Gnt=20.Max
 Lat=40.
      I/O at 0x10100000.
      Non-prefetchable 32 bit memory at 0x52dbe400.
  Bus  0, device   0, function  0:
    Host bridge: Galileo GT64011 (rev 1).
      Medium devsel.  Fast back-to-back capable.  Master
Capable.  Latency=64.  
      Non-prefetchable 32 bit memory at 0x2000000.
      Prefetchable 32 bit memory at 0x1c000000.
      Prefetchable 32 bit memory at 0x1f000000.
      Non-prefetchable 32 bit memory at 0x14000000.
      I/O at 0x14000000.


Qube 2700(Qube 1)

dmesg

Loading R4000 MMU routines.
CPU revision is: 00002810
Primary ICACHE 16K (linesize 32 bytes)
Primary DCACHE 16K (linesize 32 bytes)
Probing PCI hardware.
Calibrating delay loop.. ok - 149.91 BogoMIPS
Memory: 31232k/32764k available (856k kernel code, 676k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP, TCP
Appletalk 0.17 for Linux NET3.035
VFS: Diskquotas version dquot_5.6.0 initialized
Checking for 'wait' instruction...  available.
Linux version 2.0.34 (root@ninka.cobaltmicro.com) (gcc version 2.7.2) #1
Mon Sep 14 07:34:43 PDT 1998
Starting kswapd v 1.5 
Real Time Clock Driver v1.09
Cobalt LCD Driver v2.10
loop: registered device at major 7
ide: Cobalt MicroServer IDE controller.
    ide0: BM-DMA at 0x1000cc00-0x1000cc07
hda: QUANTUM FIREBALL SE6.4A, 6149MB w/80kB Cache, CHS=13328/15/63, UDMA
ide0 at 0x100001f0-0x100001f7,0x100003f6 on irq 14
tulip.c:v0.89B 4/19/98 becker@cesdis.gsfc.nasa.gov
eth0: Digital DC21041 Tulip at 0x10100000, 21041 mode, 00 10 e0 00 08 79,
IRQ 13.
eth0: Old style EEPROM -- no media selection information.
  PCI latency timer (CFLT) is unreasonably low at 0.  Setting to 64
clocks.
Partition check:
 hda: hda1 hda2 hda3 hda4
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 102528k swap-space (priority -1)


/proc/pci

PCI devices found:
  Bus  0, device   9, function  2:
    USB Controller: VIA Technologies VT 82C586 Apollo USB (rev 2).
      Medium devsel.  Master Capable.  Latency=22.  
      I/O at 0x300.
  Bus  0, device   9, function  1:
    IDE interface: VIA Technologies VT 82C586 Apollo IDE (rev 6).
      Medium devsel.  Fast back-to-back capable.  IRQ 14.  Master
Capable.  Latency=32.  
      I/O at 0xcc00.
  Bus  0, device   9, function  0:
    ISA bridge: VIA Technologies VT 82C586 Apollo ISA (rev 39).
      Medium devsel.  Master Capable.  No bursts.  
  Bus  0, device   7, function  0:
    Ethernet controller: DEC DC21041 (rev 33).
      Medium devsel.  Fast back-to-back capable.  IRQ 13.  Master
Capable.  Latency=64.  
      I/O at 0x10100000.
      Non-prefetchable 32 bit memory at 0x80909000.
  Bus  0, device   0, function  0:
    Host bridge: Unknown vendor Unknown device (rev 1).
      Vendor id=11ab. Device id=4146.
      Medium devsel.  Fast back-to-back capable.  Master
Capable.  Latency=32.  
      Non-prefetchable 32 bit memory at 0x2000000.
      Prefetchable 32 bit memory at 0x1c000000.
      Prefetchable 32 bit memory at 0x1f000000.
      Non-prefetchable 32 bit memory at 0x14000000.
      I/O at 0x14000000.


RaQ 1

dmesg

Loading R4000 MMU routines.
CPU revision is: 00002810
Primary ICACHE 16K (linesize 32 bytes)
Primary DCACHE 16K (linesize 32 bytes)
ns16550: console I/O
Probing PCI hardware.
Calibrating delay loop.. ok - 149.91 BogoMIPS
Memory: 14988k/16380k available (932k kernel code, 460k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP, TCP
Appletalk 0.17 for Linux NET3.035
VFS: Diskquotas version dquot_5.6.0 initialized
Checking for 'wait' instruction...  available.
Linux version 2.0.34 (root@ninka.cobaltmicro.com) (gcc version 2.7.2) #1
Fri Aug 28 19:39:04 PDT 1998
Starting kswapd v 1.5 
Serial driver version 4.13 with no serial options enabled
tty00 at 0x1c800000 (irq = 7) is a 16550A
Real Time Clock Driver v1.09
Cobalt LCD Driver v2.10
loop: registered device at major 7
ide: Cobalt MicroServer IDE controller.
    ide0: BM-DMA at 0x1000cc00-0x1000cc07
hda: QUANTUM FIREBALL CR4.3A, 4110MB w/418kB Cache, CHS=14848/9/63, UDMA
ide0 at 0x100001f0-0x100001f7,0x100003f6 on irq 14
scsi : 0 hosts.
scsi : detected total.
tulip.c:v0.76 4/22/97 becker@cesdis.gsfc.nasa.gov
eth0: DEC 21142 Tulip at 0x10100000, 00 10 e0 00 12 e0, IRQ 4

eth0: Old format EEPROM on 'Cobalt 27' board.  Using substitute media
control info.
eth0: EEPROM default media type MII 10baseT.
eth0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
Partition check:
 hda: hda1 hda2 hda3 hda4
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 130748k swap-space (priority -1)
eth0: Using user-specified media MII.

/proc/pci

PCI devices found:
  Bus  0, device   9, function  2:
    USB Controller: VIA Technologies VT 82C586 Apollo USB (rev 2).
      Medium devsel.  Master Capable.  Latency=22.  
      I/O at 0x300.
  Bus  0, device   9, function  1:
    IDE interface: VIA Technologies VT 82C586 Apollo IDE (rev 6).
      Medium devsel.  Fast back-to-back capable.  IRQ 14.  Master
Capable.  Latency=32.  
      I/O at 0xcc00.
  Bus  0, device   9, function  0:
    ISA bridge: VIA Technologies VT 82C586 Apollo ISA (rev 39).
      Medium devsel.  Master Capable.  No bursts.  
  Bus  0, device   7, function  0:
    Ethernet controller: DEC DC21142 (rev 65).
      Medium devsel.  Fast back-to-back capable.  IRQ 4.  Master
Capable.  Latency=128.  Min Gnt=20.Ma
x Lat=40.
      I/O at 0x10100000.
      Non-prefetchable 32 bit memory at 0x101c0000.
  Bus  0, device   0, function  0:
    Host bridge: Unknown vendor Unknown device (rev 2).
      Vendor id=11ab. Device id=4146.
      Medium devsel.  Fast back-to-back capable.  Master
Capable.  Latency=32.  
      Non-prefetchable 32 bit memory at 0x1000000.
      Prefetchable 32 bit memory at 0x1c000000.
      Prefetchable 32 bit memory at 0x1f000000.
      Non-prefetchable 32 bit memory at 0x14000000.
      I/O at 0x14000000.


Qube 2

dmesg

Loading R4000 MMU routines.
CPU revision is: 000028a0
Primary ICACHE 32K (linesize 32 bytes)
Primary DCACHE 32K (linesize 32 bytes)
ns16550: console I/O
Probing PCI hardware.
Calibrating delay loop.. ok - 249.86 BogoMIPS
Memory: 14920k/16380k available (988k kernel code, 472k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP
Linux IP multicast router 0.07.
VFS: Diskquotas version dquot_5.6.0 initialized
Checking for 'wait' instruction...  available.
Linux version 2.0.34C52_SK (root@brainy.cobaltnet.com) (gcc version
2.7.2) #1 Tue Nov 30 18:14:40 PST 1999
Starting kswapd v 1.5 
Serial driver version 4.13 with no serial options enabled
tty00 at 0x1c800000 (irq = 7) is a 16550A
Real Time Clock Driver v1.09
Cobalt LCD Driver v2.10
ide: Cobalt Networks IDE controller.
GAL CFG[00000001-->00000003]
    ide0: BM-DMA at 0x1000cc00-0x1000cc07
    ide1: BM-DMA at 0x1000cc08-0x1000cc0f
hda: QUANTUM FIREBALL EX3.2A, 3079MB w/418kB Cache, CHS=6256/16/63, UDMA
ide0 at 0x100001f0-0x100001f7,0x100003f6 on irq 14
md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
scsi : 0 hosts.
scsi : detected total.
eth0: Digital DS21143 Tulip rev 65 at 0x10100000, 00:10:E0:00:41:5E, IRQ
4.
eth0: Old format EEPROM on 'Cobalt 27' board.  Using substitute media
control info.
eth0:  EEPROM default media type Autosense.
eth0:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
eth0:  MII transceiver #1 config 1000 status 7809 advertising 01e1.
eth1: Digital DS21143 Tulip rev 65 at 0x10101000, 00:10:E0:00:42:88, IRQ
13.
eth1: Old format EEPROM on 'Cobalt 27' board.  Using substitute media
control info.
eth1:  EEPROM default media type Autosense.
eth1:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
eth1:  MII transceiver #1 config 1000 status 7809 advertising 01e1.
Partition check:
 hda: hda1 hda2 hda3 hda4
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 130748k swap-space (priority -1)
sysctl: ip forwarding off
Swansea University Computer Society IPX 0.34 for NET3.035
IPX Portions Copyright (c) 1995 Caldera, Inc.
Appletalk 0.17 for Linux NET3.035


/proc/pci

PCI devices found:
  Bus  0, device  12, function  0:
    Ethernet controller: DEC DC21142 (rev 65).
      Medium devsel.  Fast back-to-back capable.  IRQ 13.  Master
Capable.  Latency=128.  Min Gnt=20.M
ax Lat=40.
      I/O at 0x10101000.
      Non-prefetchable 32 bit memory at 0xaff6c800.
  Bus  0, device   9, function  2:
    USB Controller: VIA Technologies VT 82C586 Apollo USB (rev 2).
      Medium devsel.  Master Capable.  Latency=22.  
      I/O at 0x300.
  Bus  0, device   9, function  1:
    IDE interface: VIA Technologies VT 82C586 Apollo IDE (rev 6).
      Medium devsel.  Fast back-to-back capable.  IRQ 14.  Master
Capable.  Latency=64.  
      I/O at 0xcc00.
  Bus  0, device   9, function  0:
    ISA bridge: VIA Technologies VT 82C586 Apollo ISA (rev 39).
      Medium devsel.  Master Capable.  No bursts.  
  Bus  0, device   7, function  0:
    Ethernet controller: DEC DC21142 (rev 65).
      Medium devsel.  Fast back-to-back capable.  IRQ 4.  Master
Capable.  Latency=128.  Min Gnt=20.Ma
x Lat=40.
      I/O at 0x10100000.
      Non-prefetchable 32 bit memory at 0x8100000.
  Bus  0, device   0, function  0:
    Memory: Galileo GT64011 (rev 17).
      Medium devsel.  Fast back-to-back capable.  Master
Capable.  Latency=64.  
      Non-prefetchable 32 bit memory at 0x1000000.
      Non-prefetchable 32 bit memory at 0x1c000000.
      Non-prefetchable 32 bit memory at 0x1f000000.
      Non-prefetchable 32 bit memory at 0x14000000.
      I/O at 0x14000000.

RaQ2 plus

Loading R4000 MMU routines.
CPU revision is: 000028a0
Primary ICACHE 32K (linesize 32 bytes)
Primary DCACHE 32K (linesize 32 bytes)
ns16550: console I/O
Probing PCI hardware.
Calibrating delay loop.. ok - 249.86 BogoMIPS
Memory: 257308k/262140k available (988k kernel code, 3844k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP
Linux IP multicast router 0.07.
VFS: Diskquotas version dquot_5.6.0 initialized
Checking for 'wait' instruction...  available.
Linux version 2.0.34C52_SK (root@brainy.cobaltnet.com) (gcc version
2.7.2) #1 Tue Nov 30 18:14:40 PST 1999
Starting kswapd v 1.5 
Serial driver version 4.13 with no serial options enabled
tty00 at 0x1c800000 (irq = 7) is a 16550A
Real Time Clock Driver v1.09
Cobalt LCD Driver v2.10
ide: Cobalt Networks IDE controller.
GAL CFG[00000003-->00000003]
    ide0: BM-DMA at 0x1000cc00-0x1000cc07
    ide1: BM-DMA at 0x1000cc08-0x1000cc0f
hda: QUANTUM FIREBALL CR4.3A, 4110MB w/418kB Cache, CHS=14848/9/63, UDMA
ide0 at 0x100001f0-0x100001f7,0x100003f6 on irq 14
md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
ncr53c8xx: at PCI bus 0, device 8, function 0
ncr53c8xx: 53c860 detected 
ncr53c860-0: rev=0x02, base=0x2000, io_port=0x10102000, irq=4
ncr53c860-0: NCR clock is 80802KHz, 80074KHz
ncr53c860-0: ID 7, Fast-20, Parity Checking
ncr53c860-0: restart (scsi reset).
scsi0 : ncr53c8xx - revision 2.5f.1
scsi : 1 host.
scsi : detected total.
eth0: Digital DS21143 Tulip rev 65 at 0x10100000, 00:10:E0:00:A9:B4, IRQ
4.
eth0: Old format EEPROM on 'Cobalt 27' board.  Using substitute media
control info.
eth0:  EEPROM default media type Autosense.
eth0:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
eth0:  MII transceiver #1 config 1000 status 7809 advertising 01e1.
eth1: Digital DS21143 Tulip rev 65 at 0x10101000, 00:10:E0:00:A9:B5, IRQ
13.
eth1: Old format EEPROM on 'Cobalt 27' board.  Using substitute media
control info.
eth1:  EEPROM default media type Autosense.
eth1:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
eth1:  MII transceiver #1 config 1000 status 7809 advertising 01e1.
Partition check:
 hda: hda1 hda2 hda3 hda4
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 130748k swap-space (priority -1)
sysctl: ip forwarding off
Swansea University Computer Society IPX 0.34 for NET3.035
IPX Portions Copyright (c) 1995 Caldera, Inc.
Appletalk 0.17 for Linux NET3.035