This is my RaQ2 Plus, the plus means it has dual ethernet and an extra
scsi bus.

command_line: root=/dev/hda1 ro
SPLSOFT: 0x300  SPLBIO: 0x4300  SPLNET: 0x5b00  SPLTTY: 0x7b00
SPLCLOCK: 0xff00
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.4V (RAQ) #88: Thu Mar 23 01:06:06 CET 2000
    soren@meow:/usr/home/soren/netbsd/src/sys/arch/cobalt/compile/RAQ
32768 KB memory, 28772 KB free, 1740 KB in 435 buffers
mainbus0 (root): Qube/RaQ
com0 at mainbus0 addr 0x1c800000 level 3: st16650a, working fifo
com0: console
cpu0 at mainbus0: QED RM5200 CPU Rev. 10.0 with built-in FPU Rev. 10.0
cpu0: L1 cache: 32KB/32B Instruction, 32KB/32B Data, two way set
associative
cpu0: No L2 cache
gt0 at mainbus0 addr 0x14000000
dramc: 0x300    dram0: 0x30     dram1: 0x30     dram2: 0x30
dram3: 0x30
dram0: 0x30     dram2: 0x30
pci0 at gt0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Galileo Technology GT-64111 System Controller, rev 17
tlp0 at pci0 dev 7 function 0: DECchip 21143 Ethernet, pass 4.1
tlp0: interrupting at irq 4
tlp0: Ethernet address 00:10:e0:00:1c:89
lxtphy0 at tlp0 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ncr0 at pci0 dev 8 function 0: ncr 53c860 fast20 scsi
ncr0: interrupting at irq 4
ncr0: minsync=25, maxsync=254, maxoffs=8, 16 dwords burst, normal dma fifo
ncr0: single-ended, open drain IRQ driver
CACHE TEST FAILED: script execution failed.
start=004097d0, pc=8c8c8c8c, end=004097fc
CACHE INCORRECTLY CONFIGURED.
pcib0 at pci0 dev 9 function 0
pcib0: VIA Technologies VT82C586 (Apollo VP) PCI-ISA Bridge, rev 39
pciide0 at pci0 dev 9 function 1: VIA Technologies VT82C586A IDE
Controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL EX3.2A>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 3079 MB, 6256 cyl, 16 head, 63 sec, 512 bytes/sect x 6306048 sectors
wd0: 32-bits data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers)
pciide0: secondary channel configured to compatibility mode
pciide0: disabling secondary channel (no drives)
VIA Technologies VT83C572 USB Controller (USB serial bus, revision
0x02) at pci0 dev 9 function 2 not configured
tlp1 at pci0 dev 12 function 0: DECchip 21143 Ethernet, pass 4.1
tlp1: interrupting at irq 13
tlp1: Ethernet address 00:10:e0:00:0d:96
lxtphy1 at tlp1 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
boot device: <unknown>
root device: wd0e
dump device (default wd0b): 
file system (default generic): ext2fs
root on wd0e dumps on wd0b
wd0: no disk label
Process (pid 1) got signal 11
Stopped in init at      0x800e3964:     jr      ra
                bdslot: 0x800e3968:     nop
db> trace
800e3960+4 (80417000,0,d,1) ra 800296e0 sz 0
80029470+270 (80417000,0,d,1) ra 800e76d0 sz 56
800e7680+50 (80417000,0,d,1) ra 800e8300 sz 40
trap+814 (7f13,8008,d,1) ra 80002088 sz 80
mips3_UserGenException+d0 (7f13,8008,d,fb6b6d4) ra 0 sz 0
User-level: pid 1


at this point i ran alot of random commands nothing really gave me what I
thought to be anything important. Soo 2 down 4 to go. I won't have time to
do anynmore testing till probably friday. At that point I can test a qube
1 and 2. :)

-Stephen Harrell