Port-atari archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: Need help getting started

Stefan Niestegge wrote:

> i downloaded the nano binary package from the AMIGA directory, since the 
> ATARI binary package directory was empty.
> Seems to work okay, i was able to modify some config files now.
> Then i used pkgsrc to make "links". i recognized that a binary
> package was saved, too.
> Should i upload these binary packages i compiled somewhere?

Uploaded binaries (for amiga) can be used on all NetBSD/m68k ports,
so it's rather worth to install and use various binaries you need.

"Twitter client on m68k machines" is a major demonstration
on Open Source Conference in Japan:

Tier II ports of NetBSD don't have so much news
(there is no new hardware which should be supported)
but it's worth to just continue to use them and report
various results.

- post your dmesg (which show what hardwareand devices are actually working)
  to mailing list and dmesgd:

- posting youtube video might also be interensting

- try the latest -current kernel in daily build and
  check if there is any breakage
  (NetBSD provides good binary compatibility so old userland binaries
   should still work with a newer kernel)

- demonstrate your favorite machines in various events


BTW, here is dmesg of my TT030 running NetBSD/atari 6.1.3:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.1.3 (ATARITT030) #7: Tue Feb 18 22:55:46 JST 2014
Atari TT (m68030 CPU/MMU mc68882 FPU)
total memory = 69632 KB
avail memory = 65392 KB
timecounter: Timecounters tick every 15.625 msec
mainbus0 (root)
clock0 at mainbus0: system hz 64 timer-A divisor 200/192
timecounter: Timecounter "clock" frequency 12288 Hz quality 100
grfbus0 at mainbus0
grfcc0 at grfbus0: width 640 height 400 monochrome
ite0 at grfcc0: 25x80 repeat at (30/100)s next at (10/100)s has keyboard
grfcc1 at grfbus0: width 640 height 400 monochrome
ite1 at grfcc1: 25x80 repeat at (30/100)s next at (10/100)s
grfcc2 at grfbus0: width 640 height 400 monochrome
ite2 at grfcc2: 25x80 repeat at (30/100)s next at (10/100)s
kbd0 at mainbus0
fdc0 at mainbus0
fd0 at fdc0: 1.44MB 80 cyl, 2 head, 18 sec
ser0 at mainbus0: modem1 on 68901 MFP1 USART
zs0 at mainbus0: serial2 on channel a and modem2 on channel b
ncrscsi0 at mainbus0
scsibus0 at ncrscsi0 channel 0: 8 targets, 8 luns per target
nvr0 at mainbus0
lp0 at mainbus0
ne0 at mainbus0: EtherNEC on Atari ROM cartridge slot
ne0: NE2000 (RTL8019) Ethernet (8-bit)
ne0: Ethernet address 52:54:4c:09:fb:05
ne0: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x30] auto
ne0: using 64 Hz polling
avmebus0 at mainbus0
vme0 at avmebus0
leprobe: cannot map memory-area
we0 at vme0 port 0xfe200280-0xfe20029f iomem 0xfe0d0000-0xfe0d3fff irq 4
we0: SMC8216 with SMC_TT VME-ISA bridge Ethernet (16-bit)
we0: Ethernet address 00:00:c0:3f:87:ed
timecounter: Timecounter "clockinterrupt" frequency 64 Hz quality 0
scsibus0: waiting 2 seconds for devices to settle...
probe(ncrscsi0:0:0:0): Does not support linked commands
sd0 at scsibus0 target 0 lun 0: <Logitec, LHD-U32H/E, 200S> disk fixed
sd0: 30533 MB, 30533 cyl, 16 head, 128 sec, 512 bytes/sect x 62533296 sectors
4 views configured
1 mouse configured
root on sd0a dumps on sd0b
root file system type: ffs

Have fun,

Izumi Tsutsui

Home | Main Index | Thread Index | Old Index