I'm seeing this when I boot:

wd0 at wdc0 channel 0 drive 0: <ÈIÔAÃHÉ_ÄK²2·A­5°                      >
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: -1043786MB, 43148 cyl, 32783 head, 32831 sec, 512 bytes/sect x -2137674548 sectors

wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2

Has anybody else seen anything like this?  Any clues to offer before I
dive into the device driver?   I've included the complete boot log
below.

			       _MelloN_

DNARD Rev. 5, 08:00:2b:81:65:56 , 32 MB memory
Open Firmware  Built February 25, 1998 17:19:25
Copyright 1997 FirmWorks  All Rights Reserved

Rebooting with command: boot
IDE data error: 10 
Can't open disk label package
Boot device: /isa/ethernet  Arguments: 
Copyright (c) 1996, 1997, 1998, 1999
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

Number of pages to handle = 8192
pmap_init: 20000 bytes (1d84 pgs)
NetBSD 1.3I (PICCOLA) #1: Fri Oct  2 13:54:41 PDT 1998
    root@:/usr/src/sys/arch/arm32/compile/PICCOLA
real mem  = 33554432
avail mem = 27705344
using 307 buffers containing 1781760 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: SA-110 rev 3 DC enabled IC enabled WB enabled EABT
ofbus0 (root)
ofbus1 at ofbus0 (vlbus)
ofisa0 at ofbus1 (isa)
dma-controller@i00 at ofisa0 not configured
interrupt-controller@i20 at ofisa0 not configured
timer@i40 at ofisa0 not configured
configuration@i15c at ofisa0 not configured
com0 at ofisa0 (serial@i3f8): ns16550a, working fifo
com0: console
lpt0 at ofisa0 (parallel@i378)
ofbus2 at ofisa0 (8042@i60)
ofisapc0 at ofbus2 (keyboard@)
mouse@aux at ofbus2 not configured
power@i380 at ofisa0 not configured
ofbus3 at ofisa0 (gpio@i3e0)
eeprom at ofbus3 not configured
ofrtc0 at ofisa0 (rtc@i70): rtc
ofisascr0 at ofisa0 (scr@i24)
scr0 at ofisascr0
com1 at ofisa0 (ir@i2f8): ns16550a, working fifo
cs0 at ofisa0 (ethernet@i300): CRUS,CS8900
cs0: CS8900 rev. F, address 08:00:2b:81:65:56, media UTP
joy0 at ofisa0 (game@i201): ESST,game
joy0: joystick not connected
midi@i330 at ofisa0 not configured
ess0 at ofisa0 (sound@i220): ESST,es1887-codec
ess0 ESS Technology ES1887 [version 0x688b]
audio0 at ess0
opl0 at ess0: model OPL3
midi0 at opl0: <ESS Yamaha OPL3>
wdc0 at ofisa0 (ide@i1f0)
wd0 at wdc0 channel 0 drive 0: <ÈIÔAÃHÉ_ÄK²2·A­5°                      >
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: -1043786MB, 43148 cyl, 32783 head, 32831 sec, 512 bytes/sect x -2137674548 sectors

wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pci at ofbus1 not configured
display@it3b0 at ofbus1 not configured
ofrom0 at ofbus0 (flash@7000000): 0x7000000-0x707ffff
ofrom1 at ofbus0 (romcard@10000000): 0x10000000-0x10ffffff
ipl_bio=ffffbfff ipl_net=ffffbfdf ipl_tty=ffffbf5f ipl_imp=ffffbf5f
ipl_audio=ffff3d5f ipl_imp=ffff3d5f ipl_high=ffff3d5f ipl_serial=ffff3d47
clock: hz=64 stathz = 0 profhz = 0
boot device: <unknown>
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP server: 0xa000002
nfs_boot: my_domain=fugue.com
nfs_boot: my_addr=0xa000004
nfs_boot: my_mask=0xffffff00
nfs_boot: gateway=0xa000002
root on :/usr/var/tmp/arm32/root