2024-08-21-netbsd-raspi-aarch64.img

[Jun Ebihara <jun%soum.co.jp@localhost>]

I've updated 2024-08-21-netbsd-raspi-aarch64.img.gz for RPI4.

https://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/2024-08-21-aarch64/2024-08-21-netbsd-raspi-aarch64.img.gz
https://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/2024-08-21-aarch64/MD5

Topics:
- [Researching] RPI5: not booting yet
 need test
 https://github.com/worproject/rpi5-uefi
 This image has rpi5-uefi 0.3.
 /boot:
    RPI_EFI.fd.rpi5-uefi
    config.txt.rpi5-uefi
    bcm2712-rpi-5-b.dtb

- [Test] Firmware update /boot/fixup4*.dat,start4*.elf
commit 6b029c7772b5d29a50a07c477a808a7effb0a373 (HEAD -> master,
origin/master, origin/HEAD)
Author: Dom Cobley <popcornmix%gmail.com@localhost>
Date:   Tue Aug 13 14:42:23 2024 +0100

- SD/MMC Configration
  Switch Default uSD/eMMC Routing: Arasan SDHCI -> EMMC2
 http://mail-index.netbsd.org/port-arm/2021/08/08/msg007393.html
  the Arasan SDHCI is used to connect bwfm(4).

In this image, a synbolic link added

/libdata/firmware/if_bwfm:
ln -s brcmfmac43455-sdio.raspberrypi,4-model-b.txt
"brcmfmac43455-sdio.Raspberry Pi 4 Model B.txt"
to avoid
bwfm0: autoconfiguration error: NVRAM file not available

- only for RPI4
  (fill dtb for RPI3?)
- build script
 https://github.com/ebijun/NetBSD/tree/master/RPI/RPIimage/Image/aarch64
- [Issue] Can't recognize DOS partition from Windows
  Should I Use MBR version image?

- rpi cm4 + waveshare mini base board B seems stop after kernel load
  fixed: To use USB,set UEFI+FDT
  http://mail-index.netbsd.org/port-arm/2021/06/30/msg007343.html
  http://mail-index.netbsd.org/port-arm/2022/10/03/msg007875.html

- pkgin support
  edit /usr/pkg/etc/pkgin/repositories.conf
  cf.
  http://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/aarch64/2024
  and pkgin update

y
sysinfo:
 awk-20240728 libc-12.222 ntp-4.2.8pl18 sh-20220122-20240819082832Z

pkgsrc:
 curl-8.9.1 git-base-2.46.0 glib2-2.80.4 gtk3+-3.24.43 jpeg-9f libgcrypt-1.11.0
 libheif-1.18.2 libimagequant-4.3.3 libproxy-0.5.8 libxml2-2.12.9 lz4-1.10.0
 mbedtls-2.28.8 ruby32-addressable-2.8.7 ruby32-base-3.2.5
 ruby32-nokogiri-1.16.7 ruby32-public_suffix-6.0.1 sayaka-3.7.7

RPI4 status:
- boot via UEFI_VER=v1.37
  https://github.com/pftf/RPi4/releases

In this image,pre-setted /boot/RPI_EFI.fd
1. Advanced Configration
 -> Limit RAM to 3GB    Disabled
2. Boot order, from microSD

- HDMI: works
- audio: vcaudio
  http://mail-index.netbsd.org/source-changes-d/2021/01/22/msg013133.html
- USB device: works
- bwfm0 Wireless network:?
  (works well on RPI3,not works on RPI4?)
- Pi 4 Bootloader Configuration
  https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711_bootloader_config.md

Update:
- NetBSD-current 10.99.11 evbarm-aarch64 202408190930Z arm64.img from nyftp.
- pkginfo
 https://github.com/ebijun/NetBSD/blob/master/RPI/RPIimage/Image/aarch64/pkginfo
- sysinfo
 https://github.com/ebijun/NetBSD/blob/master/RPI/RPIimage/Image/aarch64/sysinfo

Update from 20221-06:
https://github.com/ebijun/NetBSD/commit/1b3ef330ecf023aa73d58ccb8b4029c520f33cdf

- mate/firefox/inkscape/libreoffice works well
   pkg_add mate
   pkg_add gvfs
   pkg_add firefox
   pkg_add firefox-l10n
   pkg_add libreoffice
   pkg_add inkscape
   pkg_add gimp
   pkg_add scribus
   pkg_add py310-sphinx
   pkg_add wxGTK31
   pkg_add gnome-keyring

- Sphinx with latexpdf
  https://github.com/ebijun/NetBSD/blob/master/Guide/latexpdf.rst

- pkgin: upgrade failed
- raspberry-pi userland: compile failed

Pre-installed packages:
  bash
  tcsh
  vlgothic-ttf
  icewm
  xli
  ruby31-mikutter
  uim
  fossil
  sudo
  git-base
  zsh
  mlterm
  pkg_chk
  lintpkgsrc
  mozilla-rootcerts
  dillo
  medit
  lrzsz
  sayaka

- pre-build packages:
  See /etc/pkg_install.conf
  PKG_PATH=http://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/aarch64/2024/

pkgsrc:
  # cd /usr
  # ftp http://cdn.netbsd.org/pub/pkgsrc/current/pkgsrc.tar.gz
  # ls /usr/pkgsrc                ... check if exists.
  # tar tzvf pkgsrc.tar.gz |head  ... check the archive
  # tar xzvf pkgsrc.tar.gz        ... extract
  # ls /usr/pkgsrc                ... check what extracted
  # pkg_chk -g                    ... List to/usr/pkgsrc/pkgchk.conf
  # (cd /usr/pkgsrc;cvs update -PAd) ... update
  # pkg_chk -un                   ... Update (listup)
  # pkg_chk -u                    ... Update

EEPROM verson:
 Check&update with Raspberry Pi OS (pi:raspberry)
 pi@raspberrypi:~ $ cat /etc/default/rpi-eeprom-update
 FIRMWARE_RELEASE_STATUS="stable"
 pi@raspberrypi:~ $ sudo rpi-eeprom-update
 BCM2711 detected
 Dedicated VL805 EEPROM detected
 BOOTLOADER: up-to-date
 CURRENT: Thu 16 Jul 15:15:46 UTC 2020 (1594912546)
 LATEST: Thu 16 Jul 15:15:46 UTC 2020 (1594912546)
 FW DIR: /lib/firmware/raspberrypi/bootloader/stable
 VL805: up-to-date
 CURRENT: 000138a1
 LATEST: 000138a1

--
Jun Ebihara