2023-04-20-netbsd-raspi-aarch64.img

[Jun Ebihara <jun%soum.co.jp@localhost>]

I've updated 2023-04-20-netbsd-raspi-aarch64.img.gz for RPI4.

https://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/2023-04-20-aarch64/2023-04-20-netbsd-raspi-aarch64.img.gz
https://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/2023-04-20-aarch64/MD5

Topics:
- NetBSD-10.99.3
- Raspberry Pi 4 UEFI Firmware v1.34
  Fix PCI DT node address in SyncPcie() [tianocore/edk2-platforms@ad00518]

- SD/MMC Configration
  Switch Default uSD/eMMC Routing: Arasan SDHCI -> EMMC2
 http://mail-index.netbsd.org/port-arm/2021/08/08/msg007393.html
  the Arasan SDHCI is used to connect bwfm(4). 

In this image, a synbolic link added

/libdata/firmware/if_bwfm:
ln -s brcmfmac43455-sdio.raspberrypi,4-model-b.txt "brcmfmac43455-sdio.Raspberry Pi 4 Model B.txt"
to avoid
bwfm0: autoconfiguration error: NVRAM file not available
 
- only for RPI4 
  (fill dtb for RPI3?)
- build script
 https://github.com/ebijun/NetBSD/tree/master/RPI/RPIimage/Image/aarch64
- [Issue] Can't recognize DOS partition from Windows
  Should I Use MBR version image?

- rpi cm4 + waveshare mini base board B seems stop after kernel load
  fixed: To use USB,set UEFI+FDT 
  http://mail-index.netbsd.org/port-arm/2021/06/30/msg007343.html
  http://mail-index.netbsd.org/port-arm/2022/10/03/msg007875.html

- pkgin support
  edit /usr/pkg/etc/pkgin/repositories.conf
  cf.
  http://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/aarch64/2023
  and pkgin update

sysinfo:
 libm-0.13 NetBSD-10.99.3 sh-20220122-20230419074049Z tcsh-6.24.10
 tzdata-2023cgtz userland-NetBSD-10.99.3/evbarm

pkgsrc:
 curl-8.0.1 dbus-1.14.6 double-conversion-3.2.1 fossil-2.21
 giflib-5.2.1nb5 git-base-2.40.0 glib2-2.74.6 gnutls-3.8.0nb1
 harfbuzz-7.1.0 libgcrypt-1.10.2 libgpg-error-1.47 libpaper-2.1.0nb2
 libproxy-0.4.18 libxml2-2.10.4 md4c-0.4.8 mlterm-3.9.3
 nghttp2-1.52.0 py310-cElementTree-3.10.11 py310-expat-3.10.11nb1
 python310-3.10.11 qt5-qtbase-5.15.9 qt5-qtx11extras-5.15.9
 qt5-qtxmlpatterns-5.15.9 ruby31-atk-4.1.2 ruby31-base-3.1.4
 ruby31-cairo-gobject-4.1.2 ruby31-gdk3-4.1.2 ruby31-gdk_pixbuf2-4.1.2
 ruby31-gio2-4.1.2 ruby31-glib2-4.1.2 ruby31-gobject-introspection-4.1.2
 ruby31-gtk3-4.1.2 ruby31-moneta-1.6.0 ruby31-pango-4.1.2
 ruby31-version_gem-1.1.2 sudo-1.9.13p3 tcsh-6.24.10
 uim-1.8.9nb1 zstd-1.5.5

RPI4 status:
- boot via UEFI_VER=v1.34
  https://github.com/pftf/RPi4/releases

In this image,pre-setted /boot/RPI_EFI.fd
1. Advanced Configration
 -> Limit RAM to 3GB	Disabled
2. Boot order, from microSD

- HDMI: works
- audio: vcaudio
  http://mail-index.netbsd.org/source-changes-d/2021/01/22/msg013133.html
- USB device: works
- bwfm0 Wireless network:?
  (works well on RPI3,not works on RPI4?)
- Pi 4 Bootloader Configuration
  https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711_bootloader_config.md

Update:
- NetBSD-current 10.99.3 evbarm-aarch64 202304190850Z arm64.img from nyftp.
- pkginfo
 https://github.com/ebijun/NetBSD/blob/master/RPI/RPIimage/Image/aarch64/pkginfo
- sysinfo
 https://github.com/ebijun/NetBSD/blob/master/RPI/RPIimage/Image/aarch64/sysinfo

Update from 20221-06:
https://github.com/ebijun/NetBSD/commit/1b3ef330ecf023aa73d58ccb8b4029c520f33cdf

- mate/firefox/inkscape/libreoffice works well
   pkg_add mate
   pkg_add gvfs
   pkg_add firefox
   pkg_add firefox-l10n
   pkg_add libreoffice
   pkg_add inkscape
   pkg_add gimp
   pkg_add scribus
   pkg_add py310-sphinx
   pkg_add wxGTK30
   pkg_add gnome-keyring

- Sphinx with latexpdf
  https://github.com/ebijun/NetBSD/blob/master/Guide/latexpdf.rst 

- pkgin: upgrade failed
- raspberry-pi userland: compile failed 

Pre-installed packages:
  bash
  tcsh
  vlgothic-ttf
  icewm
  xli
  ruby27-mikutter
  uim
  fossil
  sudo
  git-base
  zsh
  mlterm
  pkg_chk
  lintpkgsrc
  mozilla-rootcerts
  dillo
  medit
  lrzsz

- pre-build packages:
  See /etc/pkg_install.conf
  PKG_PATH=http://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/aarch64/2023/

pkgsrc: 
  # cd /usr
  # ftp http://cdn.netbsd.org/pub/pkgsrc/current/pkgsrc.tar.gz
  # ls /usr/pkgsrc                ... check if exists.
  # tar tzvf pkgsrc.tar.gz |head  ... check the archive
  # tar xzvf pkgsrc.tar.gz        ... extract
  # ls /usr/pkgsrc                ... check what extracted
  # pkg_chk -g                    ... List to/usr/pkgsrc/pkgchk.conf
  # (cd /usr/pkgsrc;cvs update -PAd) ... update
  # pkg_chk -un                   ... Update (listup)
  # pkg_chk -u                    ... Update

EEPROM verson:
 Check&update with Raspberry Pi OS (pi:raspberry)
 pi@raspberrypi:~ $ cat /etc/default/rpi-eeprom-update 
 FIRMWARE_RELEASE_STATUS="stable"
 pi@raspberrypi:~ $ sudo rpi-eeprom-update
 BCM2711 detected
 Dedicated VL805 EEPROM detected
 BOOTLOADER: up-to-date
 CURRENT: Thu 16 Jul 15:15:46 UTC 2020 (1594912546)
 LATEST: Thu 16 Jul 15:15:46 UTC 2020 (1594912546)
 FW DIR: /lib/firmware/raspberrypi/bootloader/stable
 VL805: up-to-date
 CURRENT: 000138a1
 LATEST: 000138a1

--
Jun Ebihara