Port-arm archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
RockPro64 kernel panic during module load
Hello,
i'm trying to boot the current 9.99.71 with zfs=yes in rc.conf and get
kernel panic during zfs module loading. it seems the module loading code
is broken in the current branch.
9.8729767] panic: kernel diagnostic assertion "!kenter" failrce/ab/HEAD/
src/sys/arch/aarch64/aarch64/pmap.c", line 1712
>> NetBSD/evbarm efiboot (arm64), Revision 2.2 (Wed Aug 26 16:36:32 UTC
2020)
Press retuto boot now, any other key for boot prompt
booting netbsd - 0 seconds.
12064608+3825008+1539416 [573331+951024+695882]=0x133c5a8
[ 1.0000000] NetBSD/evbarm (fdt) booting ...
[ 1.0000000] pool redzone disabled for 'kmem-04096'
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
2003, 2004, 2005,
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014,
2015, 2016, 2017,
[ 1.0000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All
righterved.
[ 1.0000000] Copyright91, 1993
[ 1.0000000] The Regents of the University of Call rights reserved.
[ 1.000RIC64) #0: Wed Aug 26 16:36:32 UTC 2020
[ 1.0000000] mkreprotBSD.org:/usr/src/sys/arch/evbarm/compile/GENERIC64
[ 1.0000000] total memory = 3948 MB
[ 1.0000000] avail memory = 3825 M[ 1.0000000] pool redzone disabled
for 'buf4k'
[ 1.0000000] pool redzone disabled for 'buf64k'
[ 1.0000000] entropy: no seed from bootloader
[ 1.0000000] armfdt0 (root)
[ 1.0000000] simplebus0 at armfdt0: Pine64 RockPro64
[ 1.0000000] cpus0 at simplebus0
[ 1.0000000] simplebus1 at simplebus0
[ 1.0000000] psci0 at simplebus0: PSCI 1.0
[ 1.0000000] simplebus2 at simplebus0
[ 1.0000000] cpu0 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id
0x0[ 1.0000000] cpufreqdt0 at cpu0
[ 1.0000000] cpu1 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x1
[ 1.0000000] cpufreqdt1 at cpu1
[ 1.0000000] cpu2 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x2
[ 1.0000000] cpufreqdt2 at cpu2
[ 1.0000000] cpu3 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x3
[ 1.0000000] cpufreqdt3 at cpu3
[ 1.0000000] cpu4 at cpus0: Arm Cortex-A72 r0p2 (v8-A), id 0x100
[ 1.0000000] cpufreqdt4 at cpu4
[ 1.0000000] cpu5 at cpus0: Arm Cortex-A72 r0p2 (v8-A), id 0x101
[ 1.0000000] cpufreqdt5 at cpu5
[ 1.0000000] gicvthree0 at simplebus0: GICv3
[ 1.0000000] gicvthree0: ITS [#0] Devices table @ 0x7a12000/0x80000,
Non-cacheable, Non-sharea[ 1.0000000] syscon0 at simple: System
Controller Registers
[ 1.0000000] syscon1 at simplebus0: System Controller Registers
[ 1.0000000] fclock0 at simplebus0: 125000000 Hz fixed clock (clki
[ 1.0000000] syscon2 at simplebus0: System Controller Registers
[ 1.0000000] syscon3 at simpleb: System Controller Registers
[ 1.0000000] syscon4 at simpleb: System Controller Registers
[ 1.0000000] syscon5 at simpleb: System Controller Registers
[ 1.0000000] syscon6 at simpleb: System Controller Registers
[ 1.0000000] syscon7 at simpleb: System Controller Registers
[ 1.0000000] syscon8 at simplebus0: System Controller Registers
[ 1.0000000] syscon9 at simpleb: System Controller Registers
[ 1.0000000] syscon10 at simple: System Controller Registers
[ 1.0000000] syscon11 at simplebus0: System Controller Registers
[ 1.0000000] syscon12 at simple: System Controller Registers
[ 1.0000000] syscon13 at simplebus0: System Controller Registers
[ 1.0000000] syscon14 at simple: System Controller Registers
[ 1.0000000] syscon15 at simplebus0: System Controller Registers
[ 1.0000000] syscon16 at simples0: System Controller Registers
[ 1.0000000] syscon17 at simple: System Controller Registers
[ 1.0000000] syscon18 at simple: System Controller Registers
[ 1.0000000] syscon19 at simplebus0: System Controller Registers
[ 1.0000000] syscon20 at simplebus0: System Controller Registers
[ 1.0000000] syscon21 at simple: System Controller Registers
[ 1.0000000] syscon22 at simple: System Controller Registers
[ 1.0000000] syscon23 at simple: System Controller Registers
[ 1.0000000] fclock1 at simplebus0: 24000000 Hz fixed clock (xin24m)
[ 1.0000000] syscon24 at simplebus0: System Controller Registers
[ 1.0000000] syscon25 at simple: System Controller Registers
[ 1.0000000] syscon26 at simplebus0: System Controller Registers
[ 1.0000000] syscon27 at simple: System Controller Registers
[ 1.0000000] gtmr0 at simplebus0: Generic Timer
[ 1.0000000] gtmr0: interrupting on GICv3 iq 27
[ 1.0000000] armgtmr0 at gtmr0: Generic Timer (24000 kHz, virtual)
[ 1.0000030] rkcru0 at simplebus0: RK3399 CRU
[ 1.0000030] rkcru1 at simplebus0: RK3399 PMU CRU
[ 1.0000030] rkiomux0 at simplebus0: RK3399 IOMUX control
[ 1.0000030] rkgpio0 at rkiomux0: GPIO (gpio0@ff720000)
[ 1.0000030] gpio0 at rkgpio0: 32 pins
[ 1.0000030] rkgpio1 at rkiomux0: GPIO (gpio1@ff730000)
[ 1.0000030] gpio1 at rkgpio1: 32 pins
[ 1.0000030] rkgpio2 at rkiomux0: GPIO (gpio2@ff780000)
[ 1.0000030] gpio2 at rkgpio2: 32 pins
[ 1.0000030] rkgpio3 at rkiomux0: GPIO (gpio3@ff788000)
[ 1.0000030] gpio3 at rkgpio3: 32 pin[ 1.0000030] rkgpio4 at rkiomu:
GPIO (gpio4@ff790000)
[ 1.0000030] gpio4 at rkgpio4: 32 pins
[ 1.0000030] rkpwm0 at simplebus0: PWM
[ 1.0000030] rkpwm1 at simplebus0: PWM
[ 1.0000030] rkpwm2 at simplebus0: PWM
[ 1.0000030] rkiic0 at simplebus0: Rockchip I2C (400000 Hz)
[ 1.0000030] iic0 at rkiic0: I2C bus
[ 1.0000030] rkpmic0 at iic0 addr 0x1b: RK808 Power Management and Real
Time Clock IC
[ 1.0000030] rkreg0 at rkpmic0: vdd_center
[ 1.0000030] rkreg1 at rkpmic0: vdd_cpu_l
[ 1.0000030] rkreg2 at rkpmic0: vc[ 1.0000030] rkreg3 at rkpmic0
[ 1.0000030] rkreg4 at rkpmic0: vcc1v8_dvp
[ 1.0000030] rkreg5 at rkpmic0: vcc3v0_touch
[ 1.0000030] rkreg6 at rkpmic0:
[ 1.0000030] rkreg7 at rkpmic0: vcc_sdio
[ 1.0000030] rkreg8 at rkpmic0: vcca3v0_codec
[ 1.0000030] rkreg9 at rkpmic0: vcc_1v5
[ 1.0000030] rkreg10rkpmic0: vcca1v8_codec
[ 1.0000030] rkreg11 at rkpmic0: vcc_3v0
[ 1.0000030] rkreg12 at rkpmic0: vcc3v3_s3
[ 1.0000030] rkreg13 at rkpmic0: vcc3v3_s0
[ 1.0000030] fan53555reg0 at ix40: Silergy SYR82X
[ 1.0000030] fan53555reg1 at iic0 addr 0x41: Silergy SYR82X
[ 1.0000030] fregulator0 at simplebus0: vcc12v_dcin
[ 1.0000030] fregulator1 at simplebus0: vcc3v3_pcie
[ 1.0000030] fregulator2 at simplebus0: vcc1v8_s3
[ 1.0000030] fregulator3 at simplebus0: vcc5v0_sys
[ 1.0000030] fregulator4 at simplebus0: vcc3v3_sys
[ 1.0000030] fregulator5 at simplebus0: vcc5v0_typec
[ 1.0000030] fregulator6 at simplebus0: vcc5v0_host
[ 1.0000030] rkiic1 at simplebus0: Rockchip I2C (100000 Hz)
[ 1.0000030] iic1 at rkiic1: I2C bus
[ 1.0000030] es8316ac0 at iic1 addr 0x11: Everest Semi ES8316 Audio
CODEC
[ 1.0000030] rkiic2 at simplebus0: Rockchip I2C (100000 Hz)
[ 1.0000030] iic2 at rkiic2: I2C bus
[ 1.0000030] fregulator7 at simplebus0: vcc5v0_usb
[ 1.0000030] com0 at simplebus0: ns16550a, working fifo
[ 1.0000030] com0: interrupting on GICv3 irq 131
[ 1.0000030] com1 at simplebus0: ns16550a, working fifo
[ 1.0000030] com1: console
[ 1.0000030] com1: interrupting on GICv3 irq 132
[ 1.0000030] rkiic3 at simplebus0: Rockchip I2C (100000 Hz)
[ 1.0000030] iic3 at rkiic3: I2C bus
[ 1.0000030] typec-portc at iic3 addr 0x22 not configured
[ 1.0000030] mmcpwrseq0 at simplebus0: Simple MMC power sequence
provider
[ 1.0000030] rkdrm0 at simplebus0
[ 1.0000030] rkpciephy0 at syscon0: RK3399 PCIe PHY
[ 1.0000030] rkusb0 at syscon0: USB2 PHY
[ 1.0000030] rkusbphy0 at rkusb0: USB2 host port
[ 1.0000030] rkusbphy1 at rkusb0: USB2 OTG p[ 1.0000030] rkusb1 at
syscon0: USB2 PHY
[ 1.0000030] rkusbphy2 at rkusb1: USB2 host port
[ 1.0000030] rkusbphy3 at rkusb1: USB2 OTG port
[ 1.0000030] /opp-table0 at simplebus0 not configured
[ 1.0000030] /opp-table1 at simplebus0 not configured
[ 1.0000030] rkvop0 at simplebus0: RK3399 VOPL
[ 1.0000030] rkvop1 at simplebus0: RK3399 VOPB
[ 1.0000030] rkpcie0 at simplebus0: RK3399 PCIe
[ 1.0000030] pci0 at rkpcie0 bus 0
[ 1.0000030] ppb0 at pci0 dev 0 function 0: vendor 1d87 product 0100
(rev. 0x00)
[ 1.0000030] ppb0: PCI Express capability version 2 <Root Port of
PC5.0GT/s
[ 1.0000030] pci1 at ppb0 bus 1
[ 1.0000030] ahcisata0 at pci1 dev 0 function 0: vendor 197b product
0585 (rev. 0x[ 1.0000030] ahcisata0: AHCI revision 1.31, 5 ports, 32
slots,33ff84<CCCS,PSC,SSC,PMD,FBSS,SPMP,SSS,SSNTF,SNCQ,S64A>
[ 1.0000030] ahcisata0: interrupting airq 8192 (MSI vec 0)
[ 1.0000030] atabus0 at ahcisata0 channel 0
[ 1.0000030] atabus1 at ahcisata0 channel 1
[ 1.0000030] atabus2 at ahcisata0 channel 2
[ 1.0000030] atabus3 at ahcisata0 channel 3
[ 1.0000030] atabus4 at ahcisata0 channel 4
[ 1.0000030] /power-management@ff310000/power-controller at syured
[ 1.0000030] rkemmcphy0 at syscon0: eMMC PHY
[ 1.0000030] /phy@ff7c0000 at simplebus0 not configured
[ 1.0000030] /phy@ff800000 at simplebus0 not configured
[ 1.0000030] rki2s0 at simplebus0: I2S/PCM controller
[ 1.0000030] rki2s0: interrupting on GICv3 irq 72
[ 1.0000030] /amba/dma-controller@ff6e0000 at simplebus1 not configured
[ 1.0000030] /amba/dma-controller@ff6d0000 at simplebus1 not configured
[ 1.0000030] rktsadc0 at simplebus0: RK3328/3399 Temperature Sensor ADC
[ 1.0000030] rktsadc0: interrupting on GICv3 irq 129
[ 1.0000030] /iommu@ff650800 at simplebus0 not configured
[ 1.0000030] sdhc0 at simplebus0: Arasan SDHCI controller
[ 1.0000030] sdhc0: interrupting on GICv3 irq 43
[ 1.0000030] sdhc0: SDHC 3.0, rev 16, 32-bit ADMA2, 200000 kHz,
embedded slot, HS SDR50 DDR50 SDR104 HS200 1.8V, re-tuning mode 1, 1024
byte blocks
[ 1.0000030] sdmmc0 at sdhc0 slot 0
[ 1.0000030] /iommu@ff8f3f00 at simplebus0 not configured
[ 1.0000030] dwhdmi0 at simplebus0: HDMI TX
[ 1.0000030] dwhdmi0: version 2.11a, phytype 0xf3
[ 1.0000030] /iommu@ff903f00 at simplebus0 not configured
[ 1.0000030] rki2s1 at simplebus0: I2S/PCM controller
[ 1.0000030] rki2s1: interrupting on GICv3 irq 73
[ 1.0000030] /opp-table2 at simplebus0 not configured
[ 1.0000030] awge0 at simplebus0: GMAC
[ 1.0000030] awge0: Core version: 00001035
[ 1.0000030] awge0: Ethernet address fe:5:68:22
[ 1.0000030] awge0: HW feature mask: d0f17
[ 1.0000030] rgephy0 at awge0 phy 0: RTL8211F 1000BASE-T media interface
[ 1.0000030] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT-FDX, auto
[ 1.0000030] rgephy1 at awge0 phy 1: RTL8211F 1000BASE-T media interface
[ 1.0000030] rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT-FDX, auto
[ 1.0000030] awge0: interrupting on GICv3 irq 44
[ 1.0000030] dwcmmc0 at simplebus0: DesignWare SD/MMC
[ 1.0000030] dwcmmc0: interrupting on GICv3 irq 97
[ 1.0000030] ehci0 at simplebus0: EHCI
[ 1.0000030] ehci0: interrupting on GICv3 irq 58
[ 1.0000030: 1 companion controller, 1 port
[ 1.0000030] usb0 at ehci0: USB revision 2.0
[ 1.0000030] ohci0 at simplebus0: OHCI
[ 1.0000030] ohci0: interrupting on GICv3 irq 60
[ 1.000003OHCI version 1.0
[ 1.0000030] usb1 at ohci0: USB revision 1.0
[ 1.0000030] ehci1 at simplebus0: EHCI
[ 1.0000030] ehci1: interrupting on GICv3 irq 62
[ 1.0000030] ehci1: 1 companion controller, 1 port
[ 1.0000030] usb2 at ehci1: USB revision 2.0
[ 1.0000030] ohci1 at simplebus0: OHCI
[ 1.0000030] ohci1: interruptirq 64
[ 1.0000030] ohci1: OHCI version 1.0
[ 1.0000030] usb3 at ohci1: USB revision 1.0
[ 1.0000030] xhci0 at simplebus0: 'otg' not supported
[ 1.0000030] xhci1 at simplebus0: DesignWare USB3 XHCI (rev. 3.00a)
[ 1.0000030] xhci1: interrupting on GICv3 irq 142
[ 1.0000030] usb4 at xhci1: USB revision 3.0
[ 1.0000030] usb5 at xhci1: USB revision 2.0
[ 1.0000030] /saradc@ff100000 at simplebus0 not configured
[ 1.0000030] rkspi0 at simplebus0: SPI
[ 1.0000030] rkspi0: interrupting on GICv3 irq 85
[ 1.0000030] spi0 at rkspi0: SPI bus
[ 1.0000030] m25p0 at spi0 slave 0
[ 1.0000030] m25p1 at spi0 slave 1
[ 1.0000030] /syscon@ff320000/io-domains at syscon23 not configured
[ 1.0000030] /video-codec@ff650000 at simplebus0 not
configure[ 1.0000030] /rga@ff680000 at simplebus0 not configured
[ 1.0000030] /efuse@ff690000 at simplebus0 not configured
[ 1.0000030] /syscon@ff770000/io-domains at syscon0 not
config[ 1.0000030] /rktimer@ff850000 at simplebus0 not configured
[ 1.0000030] rki2s2 at simplebus0: I2S/PCM controller
[ 1.0000030] rki2s2: interrupting on GICv3 irq 71
[ 1.0000030] /iommu@ff914000 at simplebus0 not configured
[ 1.0000030] /iommu@ff924000 at simplebus0 not configured
[ 1.0000030] ausoc0 at simplebus0: hdmi-sound
[ 1.0000030] /gpu@ff9a0000 at simplebus0 not configured
[ 1.0000030] pwmfan0 at simplebus0: PWM Fan (levels 0% 58% 76% 94%)
[ 1.0000030] /vdd-log at simplebus0 not configured
[ 1.0000030] rkv1crypto0 at simplebus0: Crypto v1
[ 1.0000030] entropy: ready
[ 1.0000030] armpmu0 at simplebus0: Performance Monitor Unit
[ 1.0000030] armpmu1 at simplebus0: Performance Monitor Unit
[ 1.0000030] dwcwdt0 at simplebus0: DesignWare Watchdog Timer
[ 1.0000030] dwcwdt0: default watseconds
[ 1.0000030] gpiokeys0 at simplebus0: GPIO Key Power
[ 1.0000030] gpioleds0 at simplebus0: work diy
[ 1.0000030] /sound at simplebus0 not configured
[ 1.0000030] rkdrm0: reserved 37 MB DRAM for CMA
[ 1.0000030] rkfb0 at rkdrm0
[ 1.0000030] wsdisplay0 at rkfb0 kbdmux 1: console (default, vt100
emulation)
[ 1.0000030] kern info: [drm] Supports vblank timestamp caching Rev 2
(21.10.2013).
[ 1.0000030] kern info: [drm] No driver support for vblank timestamp
query.
[ 1.0000030] rkdrm0: initialized rk 1.0.0 20191109 on minor 0
[ 1.0000030] ausoc0: codec: dwhdmi0, cpu: rki2s1
[ 1.0000030] audio0 at ausoc0: playback, capture, full duplex
[ 1.0000030] audio0: slinear_le:16 -> slinear_le:16 2ch 48000Hz, blk
1920 bytes (10ms) for playback
[ 1.0000030] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms)
for recording
[ 1.0000030] spkr0 at audio0: PC Speaker (synthesized)
[ 1.0000030] wsbell at spkr0 not configured
[ 1.6527866] cpufreqdt0: rate: 1416.000 MHz, 1125000 uV
[ 1.6827875] cpufreqdt4: rate: 1800.000 MHz, 1200000 uV
[ 1.6827875] sdmmc1 at dwcmmc0
[ 1.7427882] uhub0 at usb2: NetBSD (0x0000) EHCI root hub (0x0000),
class 9/0, rev 2.00/1.00, addr 1
[ 1.7427882] uhub1 at usb0: NetBSD (0x0000) EHCI root hub (0x0000),
class 9/0, rev 2.00/1.00, addr 1
[ 1.7527883] uhub2 at usb1: NetBSD (0x0000) OHCI root hub (0x0000),
class 9/0, rev 1.00/1.00, addr 1
[ 1.7627887] uhub3 at usb4: NetBSD (0x0000) xHCI root hub (0x0000),
class 9/0, rev 3.00/1.00, addr 0
[ 1.7727897] uhub4 at usb5: NetBSD (0x0000) xHCI root hub (0x0000),
class 9/0, rev 2.00/1.00, addr 0
[ 1.7727897] uhub5 at usb3: NetBSD (0x0000) OHCI root hub (0x0000),
class 9/0, rev 1.00/1.00, addr 1
[ 1.7827897] m25p0: JEDEC ID mfgid:0xC8, devid:0x4018
[ 1.7827897] spiflash0 at m25p0: GigaDevice 25Q127CSIG SPI flash
[ 1.7927898] spiflash0: 16384 KB, 256 sectors of 64 KB each
: vendor 0xFF dev 0xFFFF sig 0xFF not supported
[ 1.8027899] armpmu1: interrupting on GICv3 irq 23
[ 1.8127909] armpmu0: interrupting on GICv3 irq 23
[ 1.8727917] ahcisata0 port 0: device present, speed: 3.0Gb/s
[ 1.8727917] ahcisata0 port 1: device present, speed: 1.5Gb/s
[ 3.0428180] sdhc0: timeout waiting for mask 0x3 value 0 (stat
[ 3.0528184] sdhc0: command or data phase inhibited
[ 3.0628185] sdhc0: tuning did not complete, using fixed
sampl[ 3.0728195] ld0 at sdmmc0: <0x88:0x0103:M8B16G:
0x00:0x0919b522:0x000>
[ 3.0728195] ld0: 14800 MB, 7517 cyl, 64 head, 63 se10400 sectors
[ 3.0728195] dk0 at ld0: "EFI", 163840 blocks at 32768, type:
3.0728195] dk1 at ld0: "netbsd-root", 30105600 blocks at 196608,
[ 3.0728195] ld0: 8-bit width HS200, 64 MB cache, 200.000 MHz
[ 4.1128427] wd0 at atabus0 drive 0
[ 4.1128427] wd0: <ST3250620NS>
[ 4.1128427] wd0: 232 GB, 484406 cyl, 16 head, 63 set x 488281250
sectors
[ 4.1628440] wd1 at atabus1 drive 0
[ 4.1628440] wd1: <Maxtor 6L300S0>
[ 4.1628440] wd1: 279 GB, 581463 cyl, 16 head, 63 sec, 512 bytes/sect x
586114704
[ 4.2228454] RAIDframe: can't get disk size for dev spiflash0 (22)
[ 4.3328483] WARNING: 4 errors while detecting hardware; check system
log.
[ 4.3328483] boot device: dk1
[ 4.3428481] root on dk1
[ 4.3528485] root file system type: ffs
[ 4.3528485] kern.module.path=/stand/evbarm/9.99.71
Sat Aug 29 07:20:19 UTC 2020
Starting root file system check:
/dev/rdk1: 34964 files, 137852 used, 1713787 free (27 frags, 214220
blocks, 0.0% fragmentation)
/dev/rdk1: MARKING FILE SYSTEM CLEAN
Not resizing / (NAME=netbsd-root): already correct size
[ 9.8729767] panic: kernel diagnostic assertion "!kenter" failrce/ab/
HEAD/src/sys/arch/aarch64/aarch64/pmap.c", line 1712
[ 9.8729767] cpu5: Begin tracebatrace fp ffffc00071f07680
[ 9.8729767] fp ffffc00071f076b0 vpnic() at ffffc000004d6a28
netbsd:vpanic+0x150
[ 9.8729767] fp ffffc00071f07720 kern_assert() netbsd:kern_assert+0x5c
[ 9.8729767] fp ffffc00071f077b0 _pma000091c98
netbsd:_pmap_get_pdp+0x478
[ 9.8729767] fp ffffc00071f07840 _pmap_enter() at ffffc00000091e78
netbsd:_pmap_enter+0x130
[ 9.8729767] fp ffffc00071f07900 uvm_km_alloc() at ffffc000004412f4
netbsd:uvm_km_alloc+0x164
[ 9.8829771] fp ffffc00071f07990 kobj_load() at ffffc000870
netbsd:kobj_load+0xc60
[ 9.8829771] fp ffffc00071f07a40 kobj_load_vfs() at
ffffc000004cc5netbsd:kobj_load_vfs+0xd0
[ 9.8829771] fp ffffc00071f07b00 module_load_vfs() at
ffffc0000048anetbsd:module_load_vfs+0x1ac
[ 9.8829771] fp ffffc00071f07b60 module_do_load() at ffffc0000048961c
netbsd:module_do_load+0x64c
[ 9.8829771] fp ffffc00071f07c50 module_load() at ffffc00000489dd8
netbsd:module_load+0x90
[ 9.8829771] fp ffffc00071f07c90 handle_modctl_load.part.0() at
ffffc000004e73b0 netbsd:handle_modctl_load.part.0+0x120
[ 9.8829771] fp ffffc00071f07ce0 sys_modctl() at ffffc000004e78d4
netbsd:sys_modctl+0x4cc
[ 9.8929772] fp ffffc00071f07db0 sysc9bc netbsd:syscall+0x18c
[ 9.8929772] fp ffffc00071f07e60 tra0000008dac0
netbsd:trap_el0_sync+0x60
[ 9.8929772] tf ffffc00071f07ed0 el0_trap() at ffffc0008ad0c
netbsd:el0_trap
[ 9.8929772] ---- trapframe 0xffffc00071f07ed0 (304 bytes) ----
[ 9.8929772] pc=0000ff63e887ab6400
[ 9.8929772] esr=00000000560000f6, far=0000ff63e8d2b
9.8929772] x0=0000000000000000, x1=0000ffffff804980
772] x2=0000ff63e8d63fd8, x3=0000000000000002
[ 9.8929772] x4=0000000000000009, 0000100
[ 9.8929772] x6=fffffffffc000000, x7=00000000
[ 9.8929772] x8=000000501fff804700
[ 9.8929772] x10=0000000000000040, x11=0000003f
[ 9.8929772] x12=000003fd8fa34ac0, x13=000003fd8fa34ae8
[ 9.9029776] x14=0000000000000000, x15=0000ff63e8d2ba00
[ 9.9029776] x16=0000000ff63e887ab60
[ 9.9029776] x18=000000000000004b, x19=e8d2b000
[ 9.9029776] x20=21=0000ffffff804a38
[ 9.9029776] x22=0000000200127b40, 000000000002
[ 9.9029776] x24=0000ffffff805fe0, x25=0000fffff00d0000
[ 9.9029776] x26=0000000000000000, x27=0000000000000000
[ 9.9029776] x28=0000000000000000, fp=x29=0000ffffff804960
[ 9.9029776] lr=x30=0000ff63e8d4ab94, sp=0000ffffff804960
[ 9.9029776]---------------------------
[ 9.9029776] cpu5: End traceback.Stopped in pid 577.577 (zfs) at
netbsd:cpu_Debugger+0x4: ret
db{5}>
Home |
Main Index |
Thread Index |
Old Index