Port-arm archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: Raspberry PI4 NIC problem



Hi! I just committed some changes to genet and brgphy that should help. Can you cvs up and try again?

On Mon, 25 May 2020, Shin'ichiro TAYA wrote:

I have RPI4 running NetBSD-current/evbarm64 (9.99.60).
But NIC(genet) doesn't work.

I thoroughly compare the source code & dmesg between raspbian & NetBSD.
I found phy-mode is "rgmii" for raspbian but "ramie-rxid" for NetBSD.

See
https://github.com/raspberrypi/linux/blob/rpi-4.19.y/arch/arm/boot/dts/bcm2838.dtsi
or fdtdump bcm2711-rpi-4-b.dtb of raspbian.

This means  bit 16 of GENET_EXT_RGMII_OOB_CTRL is set to 1.
I modified genet_update_link() and set
GENET_EXT_RGMII_OOB_ID_MODE_DISABLE to GENET_EXT_RGMII_OOB_CTRL and it
works fine.
Also I rewrite phy-mode in bcm2711-rpi-4-b.dts and ti works fine.

Am I missing something?




Home | Main Index | Thread Index | Old Index