Banana pi pro no video

[Ron Georgia <netverbs%gmail.com@localhost>]

I am trying to install NetBSD on a Banana pi pro. I downloaded armv7 from http://nycdn.netbsd.org/pub/NetBSD-daily/HEAD/latest/evbarm-earmv7hf/binary/gzimg/armv7.img.gz

I dd the image to sd0d
$ sudo dd if=armv7_HEAD.img of=/dev/rsd0d bs=1m conv=sync

I then tried both bananapi u-boot image from =/usr/pkg/share/u-boot based on the wiki found here: https://wiki.netbsd.org/ports/evbarm/install_using_sysinst/

$ sudo dd if=/usr/pkg/share/u-boot/bananapi/u-boot-sunxi-with-spl.bin of=/dev/rsd0d bs=1k seek=8 conv=sync
$ sudo dd if=/usr/pkg/share/u-boot/bananapi-m3/u-boot-sunxi-with-spl.bin of=/dev/rsd0d bs=1k seek=8 conv=sync

Note: the documentation says of=/dev/rld0d bs=1k seek=8 conv=sync. Notice the rld0d not rsd0d. Is that right?

Any help is appreciated.

The boot.cmd does not match what the docs says it should be.
I looked at boot.cmd:

if test "${board}" = "am335x" ; then
	setenv kernel netbsd-BEAGLEBONE.ub
	setenv mmcpart 0:1
	setenv bootargs root=ld0a
else
	setenv use_efi 1
fi

if test "${soc}" = "tegra210" ; then
	# enable PCIe
	pci enum
fi

if test "${use_efi}" = "1" ; then
	setenv boot_scripts
	setenv boot_script_dhcp
	run distro_bootcmd
else
	fatload mmc ${mmcpart} ${kernel_addr_r} ${kernel}
	bootm ${kernel_addr_r} ${bootargs}
fi

================================ boot.ini ================================
ODROIDC-UBOOT-CONFIG

setenv bootargs "awge0.mac-address=${ethaddr}"
setenv bootcmd "fatload mmc 0:1 0x21000000 netbsd-GENERIC.ub; fatload mmc 0:1 0x20000000 meson8b-odroidc1.dtb; bootm 0x21000000 - 0x20000000"
run bootcmd

================================ cmdline.txt ================================
root=ld0a console=fb
#fb=1280x1024		# to select a mode, otherwise try EDID
#fb=disable		# to disable fb completely

================================ Config.txt ================================
# Boot options, see https://www.raspberrypi.org/documentation/configuration/config-txt/boot.md
kernel_address=0x01000040
# UART settings, see https://www.raspberrypi.org/documentation/configuration/uart.md
enable_uart=1
force_turbo=0


Ron Georgia
“90% of my problems are due to ignorance, the other 10% is because I just don’t know any better.”