Port-arm archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: PocketCHIP can't boot.



Hi, everyone!

> 2018/10/17 8:54、Jared McNeill <jmcneill%invisible.ca@localhost>のメール:
> 
> The attached patch should fix this panic, please test.


Thank you very much for your patch.

PocketCHIP boot up with this patch!!

dmesg is at https://sacraya.610t.org/NetBSD/dmesg/dmesg.pocketchip.20181017.txt
and, boot video is at https://www.youtube.com/watch?v=qoxuRKYCQrM

Also, X works fine.

But sometime it hangs.
The message is

pocketchip# pkg_add install icewm
[ 177.6507858] data_abort_handler: data_aborts fsr=0x1 far=0x9a7dc5c6
[ 177.6507858] Fatal kernel mode data abort: 'Alignment Fault 1'
[ 177.6638504] trapframe: 0x9991ddf0
[ 177.6638504] FSR=00000001, FAR=9a7dc5c6, spsr=20070113
[ 177.6708675] r0 =906a1d0c, r1 =00000004, r2 =00000004, r3 =00001002
[ 177.6708675] r4 =00000b8c, r5 =90693f00, r6 =909f4808, r7 =9a7dc5c6
[ 177.6844742] r8 =000005c2, r9 =00000000, r10=909f4c38, r11=9991de9c
[ 177.6844742] r12=9991dd80, ssp=9991de40, slr=8000c024, pc =800992e8

Stopped in pid 0.6 (system) at  netbsd:axe_rxeof+0x114: ldr     r3, [r7], #0x004

db{0}>

Anyway, I try to setup for event.

Thanks again!!
—
Takeshi MUTOH @610t



Home | Main Index | Thread Index | Old Index