Port-arm archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

NetBSD 7.0_RC1 always stop on otg



Hi port-arm@,

I've tried to boot NetBSD 7.0_RC1 and NetBSD-daily 201507192310Z on
a Banana Pi, both without success.

It always stops at motg0. The steps I'm taking the paths followed below. There
is this thread in archive which reports the same problem:

http://mail-index.netbsd.org/current-users/2014/12/30/msg026397.html

Supposedly, the DC cable in question are connected to the USB OTG port, not to
the DC-IN port. But no, I'm connecting it to the right port.

Is this something related to the FEX script not being loaded correctly? Tried
with a older u-boot (not the mainline), also without success.

Thank you.

---
U-Boot 2015.04-rc4-gb81bdf6 (Mar 25 2015 - 14:16:04) Allwinner Technology

CPU:   Allwinner A20 (SUN7I)
I2C:   ready
DRAM:  1 GiB
MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
SCSI:  SUNXI SCSI INIT
SATA link 0 timeout.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net:   dwmac.1c50000
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
USB1:   USB EHCI 1.00
scanning bus 1 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
sunxi# setenv autoload off
sunxi# dhcp
dwmac.1c50000 Waiting for PHY auto negotiation to complete... done
Speed: 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
DHCP client bound to address 192.168.1.44 (1367 ms)
sunxi# tftpboot 43000000 192.168.1.41:Bananapi.bin
Speed: 100, full duplex
Using dwmac.1c50000 device
TFTP from server 192.168.1.41; our IP address is 192.168.1.44
Filename 'Bananapi.bin'.
Load address: 0x43000000
Loading: ####
         2.7 MiB/s
done
Bytes transferred = 50908 (c6dc hex)
sunxi# tftpboot 82000000 192.168.1.41:netbsd/netbsd.ub
Speed: 100, full duplex
Using dwmac.1c50000 device
TFTP from server 192.168.1.41; our IP address is 192.168.1.44
Filename 'netbsd/netbsd.ub'.
Load address: 0x82000000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #############################################################
         2.7 MiB/s
done
Bytes transferred = 4705280 (47cc00 hex)
sunxi# setenv bootargs sysconfig=43000000 root=ld0a
sunxi# bootm 82000000
## Booting kernel from Legacy Image at 82000000 ...
   Image Name:   NetBSD/bpi 7.0_RC1
   Image Type:   ARM NetBSD Kernel Image (uncompressed)
   Data Size:    4705216 Bytes = 4.5 MiB
   Load Address: 40007800
   Entry Point:  40007800
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
## Transferring control to NetBSD stage-2 loader (at address 40007800) ...
Early console started
[ Kernel symbol table missing! ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.0_RC1 (BPI.201507192310Z)
total memory = 1024 MB
avail memory = 1009 MB
sysctl_createv: sysctl_create(machine_arch) returned 17
kern.module.path=/stand/evbarm/7.0/modules
mainbus0 (root)
cpu0 at mainbus0 core 0: 960 MHz Cortex-A7 r0p4 (Cortex V7A core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: 32KB/32B 2-way L1 VIPT Instruction cache
cpu0: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
cpu0: 256KB/64B 8-way write-through L2 PIPT Unified cache
vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
cpu1 at mainbus0 core 1
armperiph0 at mainbus0
armgic0 at armperiph0: Generic Interrupt Controller, 160 sources (151 valid)
armgic0: 32 Priorities, 128 SPIs, 7 PPIs, 16 SGIs
armgtmr0 at armperiph0: ARMv7 Generic 64-bit Timer (24000 kHz)
armgtmr0: interrupting on irq 27
awinio0 at mainbus0: A20 (0x1651)
awingpio0 at awinio0
awindma0 at awinio0: DMA
awindma0: interrupting on irq 59
awincnt0 at awinio0
com0 at awinio0 port 0: ns16550a, working fifo
com0: console
awindebe0 at awinio0 port 0: Display Engine Backend (BE0)
awintcon0 at awinio0 port 0: LCD/TV timing controller (TCON0)
awinhdmi0 at awinio0: HDMI 1.3
awinwdt0 at awinio0: default period is 10 seconds
awinrtc0 at awinio0: RTC
awinusb0 at awinio0 port 0
awinusb0: no restrict gpio found
ohci0 at awinusb0: OHCI USB controller
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
ohci0: interrupting on irq 96
ehci0 at awinusb0: EHCI USB controller
ehci0: companion controller, 1 port each: ohci0
usb1 at ehci0: USB revision 2.0
ehci0: interrupting on irq 71
awinusb1 at awinio0 port 1
awinusb1: no restrict gpio found
ohci1 at awinusb1: OHCI USB controller
ohci1: OHCI version 1.0
usb2 at ohci1: USB revision 1.0
ohci1: interrupting on irq 97
ehci1 at awinusb1: EHCI USB controller
ehci1: companion controller, 1 port each: ohci1
usb3 at ehci1: USB revision 2.0
ehci1: interrupting on irq 72
motg0 at awinio0: OTG
motg0: interrupting at irq 70
motg0: no reÿ

--
db


Home | Main Index | Thread Index | Old Index