Re: Latest RaspberryPI image

["Jared D. McNeill" <jmcneill%invisible.ca@localhost>]

You need to:
  # cd /dev
  # mknod plcom0 c plcom 0

Then use plcom0 in /etc/ttys

On 2013-01-10, at 5:16 PM, Dave Tyson <dtyson%anduin.org.uk@localhost> wrote:

> Hi Nick, 
> 
> Just tested the latest image, 20130110, you have posted and it seems to work 
> really well. I had problems with the 20130107 image as that appeared to boot 
> OK and then hung before the video came up. The serial console showed:
> 
> plcom0 at obio0 intr 57
> plcom0: txfifo disabled
> plcom0: console
> sdhc0 at obio0 intr 62: SDHC controller
> sdhc0: SD Host Specification 3.0, rev.153
> sdmmc0 at sdhc0 slot 0
> dotg0 at obio0 intr 9: USB controller
> vcfb0 at obio0 intr 0: VideoCore (0x0)
> 
> and nothing else appeared. 
> 
> The 20130110 image just works. One thing that did puzzle me was the serial 
> port is unresponsive to login after the boot completes. I thought this was 
> just a matter of fiddling with /etc/ttys, but I tried tty00 and that's no 
> good. Any suggestions ?
> 
> Cheers,
> Dave
> 
> -- 
> =====================================================================
> Phone: 07805784357
> Open Source O/S: http://www.netbsd.org
> Caving: http://www.wirralcavinggroup.org.uk
> =====================================================================