Subject: Re: Three X server problems on NetBSD/shark 4.0 (dmesg)
To: Ignatios Souvatzis <is@netbsd.org>
From: Ignatios Souvatzis <is@netbsd.org>
List: port-arm
Date: 12/28/2007 14:25:28
On Fri, Dec 28, 2007 at 02:23:35PM +0100, Ignatios Souvatzis wrote:

> I've run the X server on isgfb with the (appended) XF86Config, and
> have some complaints:

Here's the /var/run/dmesg.boot

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0_RC5 (MARIE) #0: Wed Dec 26 13:25:40 CET 2007
	ignatios@random85.cs.uni-bonn.de:/var/itch/sources/4.0/os/sys/arch/shark/compile/MARIE
total memory = 98304 KB
avail memory = 91316 KB
timecounter: Timecounters tick every 15.625 msec
mainbus0 (root)
cpu0 at mainbus0: SA-110 step S (SA-1 core)
cpu0: DC enabled IC enabled WB enabled EABT
cpu0: 16KB/32B 32-way Instruction cache
cpu0: 16KB/32B 32-way write-back Data cache
ofbus0 (root)
ofbus1 at ofbus0 (packages)
client-services at ofbus1 not configured
terminal-emulator at ofbus1 not configured
stringio at ofbus1 not configured
deblocker at ofbus1 not configured
obp-tftp at ofbus1 not configured
ufs-file-system at ofbus1 not configured
fat-file-system at ofbus1 not configured
iso9660-file-system at ofbus1 not configured
disk-label at ofbus1 not configured
dropin-file-system at ofbus1 not configured
sound.wav at ofbus1 not configured
chosen at ofbus0 not configured
openprom at ofbus0 not configured
options at ofbus0 not configured
aliases at ofbus0 not configured
memory@e000000 at ofbus0 not configured
mmu at ofbus0 not configured
ofbus2 at ofbus0 (vlbus)
ofisa0 at ofbus2 (isa)
dma-controller@i00 at ofisa0 not configured
interrupt-controller@i20 at ofisa0 not configured
timer@i40 at ofisa0 not configured
configuration@i15c at ofisa0 not configured
com0 at ofisa0 (serial@i3f8): ns16550a, working fifo
lpt0 at ofisa0 (parallel@i378)
pckbc0 at ofisa0 (8042@i60)
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
power@i380 at ofisa0 not configured
ofbus3 at ofisa0 (gpio@i3e0)
eeprom at ofbus3 not configured
ofrtc0 at ofisa0 (rtc@i70): rtc
ofisascr0 at ofisa0 (scr@i24)
scr0 at ofisascr0
com1 at ofisa0 (ir@i2f8): ns16550a, working fifo
cs0 at ofisa0 (ethernet@i300): CRUS,CS8900
cs0: CS8900 rev. F, address 08:00:2b:81:60:35, media UTP
joy0 at ofisa0 (game@i201): ESST,game
joy0: joystick not connected
midi@i330 at ofisa0 not configured
ess0 at ofisa0 (sound@i220): ESST,es1887-codec
ess0: ESS Technology ES1887 [version 0x688b]
ess0: audio1 interrupting at irq 9
ess0: audio2 interrupting at irq 15
audio0 at ess0: full duplex, mmap, independent
opl0 at ess0: model OPL3
midi0 at opl0: ESS Yamaha OPL3 (CPU-intensive output)
wdc0 at ofisa0 (ide@i1f0)
atabus0 at wdc0 channel 0
pci at ofbus2 not configured
igsfb0 at ofbus2 (display@it3b0): IGS CyberPro 2010 at 0x06000000
igsfb0: 2MB, 1024x768, 8bpp
wsdisplay0 at igsfb0 kbdmux 1: console (std, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ofrom0 at ofbus0 (flash@7000000): 0x7000000-0x707ffff
ofrom1 at ofbus0 (romcard@10000000): 0x10000000-0x10ffffff
ofbus4 at ofbus0 (cpus)
cpu@0 at ofbus4 not configured
ofbus5 at ofbus0 (udp)
nfs at ofbus5 not configured
timecounter: Timecounter "clockinterrupt" frequency 64 Hz quality 0
clock: hz=64 stathz = 0 profhz = 0
timecounter: Timecounter "i8253" frequency 1193182 Hz quality 100
IPsec: Initialized Security Association Processing.
wd0 at atabus0 drive 0: <SAMSUNG HM060HC>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57241 MB, 116301 cyl, 16 head, 63 sec, 512 bytes/sect x 117231408 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (std, vt100 emulation)
wsdisplay0: screen 2 added (std, vt100 emulation)
wsdisplay0: screen 3 added (std, vt100 emulation)
wsdisplay0: screen 4 added (std, vt100 emulation)