Subject: Re: Test kernels
To: None <ad@NetBSD.org>
From: Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>
List: port-arm
Date: 11/30/2007 01:00:55
ad@NetBSD.org wrote:

> Thanks to everyone who has helped so far. I have put another set of kernels
> at the URL below. Any takers?
> 
> arm:	cats, iyonix, netwinder, shark
> m68k:	hp300, luna68k, mac68k, mvme68k, news68k, next68k
 :
> 	http://www.hairylemon.org/~ad/netbsd/softint/

- shark.bz2 on FUNAI's DNARD works.
  (BTW it's better to put a.out kernel binary for shark)
- news68k.bz2 on NWS-1750 (68030) also works.
- hp300.bz2 on HP 9000/382 (68040) hangs during scsi probe:

---
 :
spc0 at dio0 scode 14 ipl 4: 98265A SCSI, 32-bit DMA, SCSI ID 7
scsibus0 at spc0: 8 targets, 8 luns per target
le0 at dio0 scode 21 ipl 5: address 08:00:09:18:d8:d2
le0: 8 receive buffers, 2 transmit buffers
WARNING: select code size unknown for id = 0x39 secid = 0x10
device id = 0x39 secid = 0x10 at dio0 scode 132 ipl 3 not configured
WARNING: select code size unknown for id = 0x39 secid = 0x10
device id = 0x39 secid = 0x10 at dio0 scode 133 ipl 3 not configured
nhpib3 at dio0 scode 134 ipl 3: 98624A HP-IB
hpibbus3 at nhpib3
nhpib4 at dio0 scode 135 ipl 3: 98624A HP-IB
hpibbus4 at nhpib4
interrupt levels: vm = 3
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <CONNER, CFP1080S, 4040> disk fixed

 [hangs here, sending break]

Stopped in pid 0.2 (system) at  netbsd:cpu_Debugger+0x6:        unlk    a6
db> tr
cpu_Debugger(0,5,2832b8,262e00,1ea9f2) + 6
comintr(1739800,2058,12c89c,2f45e00,2f2ffa8) + 562
intr_dispatch(74) + 52
intrhand(2f45e00) + a
lwp_trampoline() + e
db> 
---

where
>> sd0: 1030 MB, 3658 cyl, 6 head, 96 sec, 512 bytes/sect x 2110812 sectors
>> sd0: async, 8-bit transfers
these lines should appear.
"interrupt levels: vm = 3" means bad spl value?

---
Izumi Tsutsui