Subject: Re: Shark and igsfb
To: None <>
From: Izumi Tsutsui <>
List: port-arm
Date: 01/07/2007 23:55:59 wrote:

> > I added ofbus attachment code for uwe's igsfb so now we can use a high 
> > resolution graphical console with hardware acceleration on rev. 5 
> > sharks.
> This has been committed

FYI, my FUNAI's DNARD compatible has CT65550 so igsfb doesn't match.
(should we split dev/pci/chipsfb.c into MI and bus dependent part?)

XF86_SVGA (3.3.6) log is attached.
Izumi Tsutsui

XFree86 Version 3.3.6a / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: November 30 2000
        If the server is older than 6-12 months, or if your card is newer
        than the above date, look for a newer version before reporting
        problems.  (see http://www.XFree86.Org/FAQ)
Operating System: NetBSD/shark 1.6.2 [ELF] The NetBSD Foundation, Inc.
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 1):
      ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
      ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
      ct64300, CyberPro2010, generic
Using wscons driver (version 3.32)
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) Mouse: type: Microsoft, device: /dev/tty00, baudrate: 1200
(**) Mouse: buttons: 3
(**) SVGA: Graphics device ID: "Generic SVGA"
(**) SVGA: Monitor ID: "Generic Monitor"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
checkMapInfo: warning: failed to get map info for region 3
        (Inappropriate ioctl for device)
(--) SVGA: CHIPS: chip revision: 198
(--) SVGA: Chipset: ct65550 
(--) SVGA: CHIPS: no monitor detected.
(--) SVGA: CHIPS: 2048 kB VRAM
(--) SVGA: CHIPS: TFT probed.
(--) SVGA: CHIPS: VL Bus
(--) SVGA: CHIPS: base address is set at 0x6800000.
(--) SVGA: CHIPS: Linear addressing is enabled at 0x6800000.
(--) SVGA: CHIPS: using programmable clocks.
(--) SVGA: CHIPS: probed memory clock of 39650 KHz
(--) SVGA: CHIPS: GJS: About to test for builtin modes. eg NTSC
Mode = 640x480(--) SVGA: chipset:  ct65550
(--) SVGA: videoram: 2048k
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Maximum allowed dot-clock: 95.000 MHz
(**) SVGA: Mode "640x480": mode clock =  25.175
(**) SVGA: Virtual resolution set to 800x600
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: CHIPS: 1597952 bytes off-screen memory available
(--) SVGA: CHIPS: SpeedUps selected (Flags=0xF)
(--) SVGA: CHIPS: Memory mapped I/O selected
(--) SVGA: XAA: CPU-to-screen color expand
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 pattern fill
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: CPU to screen color expansion (bitmap, TE/NonTE imagetext, TE/NonTE polytext)
(--) SVGA: XAA: Using 6 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments