On Saturday 25 December 2004 23:36, Ignatios Souvatzis wrote:

> Output of /sbin/dmesg or better /var/run/dmesg.boot with the bootup
> messages would be interesting, in case we want to judge what went wrong
> with your first installation attempt.

  I suspect that the problems I was having were mostly caused by making wrong 
guesses, eg, I started with trying to use sd0c for /usr because I couldn't 
read the disk description shown by the installer. Things worked a lot better 
after I figured out how the partition naming scheme works. It still did 
involve some guessing, but it looks like my semi-educated guesses were
correct eventually.

- Blizzard 2040 card gets detected/configured properly
- GVP (HD8+?) scsi controller gets detected 
- XSurf ethernet works properly
- Cybervision64/3D doesn't get detected?
   grfcv3d at zbus0: pa 0x200000 man/pro 8512/67 not configured

all 4 scsi drives get detected (2 harddisks, 1 cdrom, 1 zip drive)

The FIREBALL_TM3200S, is connected to the GVP controller, the other
drives all kook up to the Blizzard 2040

network is up, dhclient=YES works fine ;)

enabling sshd makes startup hang, but I'll dig into that later, starting sshd 
manually allows me to ssh into it.

Erik

/var/run/dmesg.boot:
NetBSD 2.0 (GENERIC) #0: Tue Nov 30 22:37:50 UTC 2004
 
builds@build:/big/builds/ab/netbsd-2-0-RELEASE/amiga/200411300000Z-obj/big/builds/ab/netbsd-2-0-RELEASE/src/sys/arch/amiga/compile/GENERIC
Amiga 500/2000 (m68040 CPU/MMU/FPU)
total memory = 98304 KB
avail memory = 93608 KB
memory segment 0 at 08000000 size 06000000
memory segment 1 at 00000000 size 00100000
mainbus0 (root)
clock0 at mainbus0: CIA B system hz 100 hardware hz 709379
Calibrating delay loop... 78/1024 us
a2kbbc0 at mainbus0
ser0 at mainbus0: input fifo 512 output fifo 32
par0 at mainbus0
kbd0 at mainbus0: CIA A type Amiga
ms0 at mainbus0
grfcc0 at mainbus0
grf0 at grfcc0: width 640 height 400 colors 4
ite0 at grf0: rows 50 cols 80 repeat at (30/100)s next at (10/100)s has 
keyboard
fdc0 at mainbus0: dmabuf pa 0xe3030: dmabuf ka 0x889d030
fd0 at fdc0 unit 0: 3.5dd 80 cyl, 2 head, 11 sec [9 sec], 512 bytes/sec
aucc0 at mainbus0
audio0 at aucc0: half duplex
zbus0 at mainbus0: i/o size 0x00400000
bztzsc0 at zbus0 pa 0xea0000 man/pro 8512/24: address 0x8afdf00: FAS216, 
40MHz, SCSI ID 7
scsibus0 at bztzsc0: 8 targets, 8 luns per target
ne0 at zbus0 pa 0xe90000 man/pro 4626/23
ne0: Ethernet address 52:54:40:28:7c:c9
ne0: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x70] auto
grfcv3d at zbus0: pa 0x200000 man/pro 8512/67 not configured
gvpbus0 at zbus0 pa 0xec0000 man/pro 2017/11: subprod ff flags 40
gtsc0 at gvpbus0: dmamask 0xffffff flags 4c maxdma 65536
sc_clkfreg: 14.3Mhz
scsibus1 at gtsc0: 8 targets, 8 luns per target
4 views configured
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <TOSHIBA, MK538FB, 6062> disk fixed
sd0: 1170 MB, 1980 cyl, 15 head, 80 sec, 512 bytes/sect x 2396970 sectors
sd0: sync (100.00ns offset 15), 8-bit (10.000MB/s) transfers
sd1 at scsibus0 target 5 lun 0: <IOMEGA, ZIP 100, D.09> disk removable
sd1: fabricating a geometry
sd1: 98304 KB, 96 cyl, 64 head, 32 sec, 512 bytes/sect x 196608 sectors
sd1: async, 8-bit transfers
cd0 at scsibus0 target 6 lun 0: <CyberDrv, SCSI CD-ROM 120S, 1.00> cdrom 
removable
sd2 at scsibus0 target 6 lun 1: <, , > disk fixed
sd2: fabricating a geometry
sd2: 2315 MB, 2315 cyl, 64 head, 32 sec, 512 bytes/sect x 4742465 sectors
cd0: sync (100.00ns offset 8), 8-bit (10.000MB/s) transfers
sd2: async, 8-bit transfers
call_sicallback: 1 more dynamic structures 4 total
alloc CHIP target 0 bounce pa 0x0xc2fcc
gtsc0: target 0 now synchronous, period=208ns, offset=12.
sd3 at scsibus1 target 0 lun 0: <QUANTUM, FIREBALL_TM3200S, 300X> disk fixed
sd3: 3067 MB, 6810 cyl, 5 head, 184 sec, 512 bytes/sect x 6281856 sectors
alloc CHIP target 1 bounce pa 0x0xb2fb8
call_sicallback: 22 more dynamic structures 26 total
alloc CHIP target 2 bounce pa 0x0xa2fa4
alloc CHIP target 3 bounce pa 0x0x92f90
call_sicallback: 1 more dynamic structures 27 total
alloc CHIP target 4 bounce pa 0x0x82f7c
alloc CHIP target 5 bounce pa 0x0x72f68
alloc CHIP target 6 bounce pa 0x0x62f54
sd1: fabricating a geometry
sd2: fabricating a geometry
sd2: rdb scan I/O error
warning unknown dostype: 0x53575000 marking unused
call_sicallback: 76 more dynamic structures 103 total
warning unknown dostype: 0x53575000 marking unused
sd2: fabricating a geometry
sd2: rdb scan I/O error
sd1: fabricating a geometry
root on sd0a dumps on sd0b
root file system type: ffs