Subject: Setting Up Dial-Up Connection with PPPD again:<
To: None <""port-amiga@netbsd.org>
From: andrea franceschini <andrea.franceschini@linet.it>
List: port-amiga
Date: 10/19/1998 01:29:00
Hi all,

I'm stil trying to set-up pppd under my NETBSD/amiga.

I cannot understand where is the problem.

All seem to work fine except the data transmission

When i try to ping somewhere i dont receive any response,but the SD led on the modem
blinks
These are my configuration files:

/etc/ppp/chat-linet
 
ABORT 'NO CARRIER'
ABORT 'NO DIALTONE'
ABORT 'ERROR'
ABORT 'BUSY'
ABORT 'NO ANSWER'
'' ATZ0
OK ATX3
OK ATL3
OK ATDT71586543
CONNECT ''

/etc/ppp/pap-secrets

me * <My Passwd>

/etc/ppp/peers/linet

tty00 57600 
crtscts
debug
modem
lock
passive
mtu 576
mru 576
domain linet.it
defaultroute
noipdefault
netmask 255.255.255.192
user me 
connect '/usr/sbin/chat -v -f /etc/ppp/chat-linet'


i start connection with: pppd call linet

The ppp0 come up with the correct (i asked sysop of ISP) local an remote IP ,the routing
table are properly initilizied or so seems:

#netstat -r

Routing tables

Internet:
Destination        Gateway            Flags     Refs     Use    Mtu  Interface
default            194.185.24.90      UG          0        0      -  ppp0
localhost          localhost          UH          1       24      -  lo0
194.185.24.90      194.185.24.104     UH          1        0      -  ppp0

XNS:
Destination        Gateway            Flags     Refs     Use    Mtu  Interface

ISO:
Destination        Gateway            Flags     Refs     Use    Mtu  Interface

X.25:
Destination        Gateway            Flags     Refs     Use    Mtu  Interface

AppleTalk:
Destination        Gateway            Flags     Refs     Use    Mtu  Interface


Plese Help me !!:((