Re: Nouveau not initializing correctly with stock kernel of NetBSD 10.0.0

[Paul Goyette <paul%whooppee.com@localhost>]

The "core notifier timeout" and "base:-n timeout" messages happen all
the time on my system.  The messages themselves seem to be detailed 
internal messages and don't provide any link back to real-world, so
not very useful for debugging.

On my system at least the system is  useable, modulo stalling at
unexpected times.  See my PR kern/58053 for more details.

FWIW, my system behsves quite well when using firefox or xterms;  it
fails misersably when I throw libreoffice and/or gnucash (both from
pkgsrc) into the mix.

You can most likely get a dumb framebuffer running if you disable 
nouveau at boot.  Just interrupt the countdown, excape to the boot
command prompt, and enter

	userconf disable nouveau*

Then continue booting.  You won't get any X accelleration...  :-(

Good luck.


On Sat, 10 Aug 2024, Connor McLaughlan wrote:

> Hello All,
>
> i am trying to get a framebuffer and possibly accelerated x11 on an
> amd64 box using nouveau.
> The GPUs i tried are an old PCIe 8400GS and a GTS250.
>
> So far i had no success with a fresh install of NetBSD 10.0.0 and the
> stock kernel, the monitor output freezes after this line, and never
> comes back to life - i also cannot switch to other consoles or bring
> up x11:
>
> [     1.000000] NetBSD 10.0 (GENERIC) #0: Thu Mar 28 08:33:33 UTC 2024
> [     1.000000]
> mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
> ...
> [     4.351708] kern.module.path=/stand/amd64/10.0/modules
> [     4.351708] nouveau0: NVIDIA G92 (092a80a2)
> [     4.481827] nouveau0: bios: version 62.92.9a.00.00
> [     4.501837] nouveau0: interrupting at msi1 vec 0 (nouveau0)
> [     4.501837] nouveau0: fb: 1024 MiB GDDR3
> [     4.577621] Zone  kernel: Available graphics memory: 9007199254225440 KiB
> [     4.577621] nouveau0: DRM: VRAM: 1024 MiB
> [     4.577621] nouveau0: DRM: GART: 1048576 MiB
> [     4.581910] nouveau0: DRM: TMDS table version 2.0
> [     4.581910] nouveau0: DRM: DCB version 4.0
> [     4.581910] nouveau0: DRM: DCB outp 00: 04011310 00000028
> [     4.581910] nouveau0: DRM: DCB outp 01: 02000300 00020028
> [     4.581910] nouveau0: DRM: DCB outp 02: 01000302 00020030
> [     4.581910] nouveau0: DRM: DCB outp 03: 02022322 00020010
> [     4.581910] nouveau0: DRM: DCB conn 00: 00001030
> [     4.581910] nouveau0: DRM: DCB conn 01: 00000100
> [     4.581910] nouveau0: DRM: DCB conn 02: 00002261
> [     4.581910] nouveau0: DRM: MM: using CRYPT for buffer copies
> [     4.581910] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [     4.581910] [drm] Driver supports precise vblank timestamp query.
> [     4.621920] nouveaufb0 at nouveau0
> [     4.621920] [drm] Initialized nouveau 1.3.1 20120801 for nouveau0 on minor 0
>
> However the system comes up and i can ssh into it. So dmesg gives the
> following additional info after the output freeze above - including a
> few timeouts:
>
> [     4.621920] [drm] Initialized nouveau 1.3.1 20120801 for nouveau0 on minor 0
> [     4.621920] nouveaufb0: framebuffer at 0xc0006000, size 1920x1200,
> depth 32, stride 7680
> [     6.623293] nouveau0: autoconfiguration error: error: DRM: core
> notifier timeout
> [     8.624667] nouveau0: autoconfiguration error: error: DRM: base-0: timeout
> [     8.654687] wsdisplay0 at nouveaufb0 kbdmux 1: console (default,
> vt100 emulation), using wskbd0
> [     8.654687] wsmux1: connecting to wsdisplay0
> [     8.654687] wskbd1: connecting to wsdisplay0
> [    45.850161] wsdisplay0: screen 1 added (default, vt100 emulation)
> [    45.850161] wsdisplay0: screen 2 added (default, vt100 emulation)
> [    45.850161] wsdisplay0: screen 3 added (default, vt100 emulation)
> [    45.850161] wsdisplay0: screen 4 added (default, vt100 emulation)
>
> My only succesfull option to get a working console output and to start
> up x11 was to build a kernel without nouveau and only the generic
> framebuffer. Of course then i don't have accelerated opengl in x11.
>
> Can someone help or give some insights on what can i do to bring up
> nouveau successfully?
>
> Best regards,
> Connor
>
> !DSPAM:66b84872239991016314798!

+---------------------+--------------------------+----------------------+
| Paul Goyette (.sig) | PGP Key fingerprint:     | E-mail addresses:    |
| (Retired)           | 1B11 1849 721C 56C8 F63A | paul%whooppee.com@localhost    |
| Software Developer  | 6E2E 05FD 15CE 9F2D 5102 | pgoyette%netbsd.org@localhost  |
| & Network Engineer  |                          | pgoyette99%gmail.com@localhost |
+---------------------+--------------------------+----------------------+