Port-amd64 archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
ahcisata usage mode (on NetBSD 6.1.1 (GENERIC) amd64)
Hi all,
From dmesg it seems to me, that my sata-drives are not used at their most attainable speed. Am I correct in my understanding from dmesg? Is there any way I can be sure of this, rather than "the system feels sluggish"?
The motherboard is able to do ultra/133, the drives are, the cabling is ok.
Ubuntu 13.04 (amd64) says:
[ 113.458794] ata1.00: configured for UDMA/100
[ 113.579743] ata5.00: configured for UDMA/133
[ 113.579960] ata4.00: configured for UDMA/133
[ 114.373089] ata3.00: configured for UDMA/133
[ 113.965700] ata2.00: configured for UDMA/133
This is as I expect it: the first drive is slower, but the next 4 are all WD10EAVS drives, capable of UDMA/133.
But NetBSD 6.1.1 (amd64) has a different story to tell:
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 2: device present, speed: 3.0Gb/s
ahcisata0 port 3: device present, speed: 3.0Gb/s
ahcisata0 port 4: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0
wd0: <TOSHIBA MK1665GSX>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd1 at atabus1 drive 0
wd1: <WDC WD10EAVS-00M4B0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2 at atabus2 drive 0
wd2: <WDC WD10EAVS-00M4B0>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd3 at atabus3 drive 0
wd3: <WDC WD10EAVS-00D7B0>
wd3: drive supports 16-sector PIO transfers, LBA48 addressing
wd3: 931 GB, 1938018 cyl, 16 head, 63 sec, 512 bytes/sect x 1953523055 sectors
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd3(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd4 at atabus4 drive 0
wd4: <WDC WD10EAVS-00D7B0>
wd4: drive supports 16-sector PIO transfers, LBA48 addressing
wd4: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd4: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd4(ahcisata0:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
From the "(using DMA)" in the last line for each drive, I undertand that I'm currenctly running DMA mode 2. Am I correct?
For completeness, both dmesg are attached.
With kind regards,
Job Hanssen
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.1.1 (GENERIC)
total memory = 3965 MB
avail memory = 3835 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Gigabyte Technology Co., Ltd. GA-MA790GP-DS4H ( )
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD Phenom(tm) II X4 920 Processor, id 0x100f42
cpu1 at mainbus0 apid 1: AMD Phenom(tm) II X4 920 Processor, id 0x100f42
cpu2 at mainbus0 apid 2: AMD Phenom(tm) II X4 920 Processor, id 0x100f42
cpu3 at mainbus0 apid 3: AMD Phenom(tm) II X4 920 Processor, id 0x100f42
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 21, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <GBT ,GBTUACPI,42302e31>, AslId <GBTU,01010101>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
SYSR (PNP0C02) at acpi0 not configured
PMIO (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
UAR1 (PNP0501) at acpi0 not configured
LPT1 (PNP0400) at acpi0 not configured
pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
EXPL (PNP0C02) at acpi0 not configured
MEM (PNP0C01) at acpi0 not configured
acpiwmi0 at acpi0 (AOD, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1022 product 0x9600 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x1022 product 0x9602 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 5 function 0: vendor 0x1002 product 0x9614 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
radeondrm0 at vga0: ATI Radeon 3300 Graphics
radeondrm0: Initialized radeon 1.29.0 20080613
hdaudio0 at pci1 dev 5 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 19
hdafg0 at hdaudio0: ATI RS690/780 HDMI
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 48000Hz PCM16 AC3
ppb1 at pci0 dev 10 function 0: vendor 0x1022 product 0x9609 (rev. 0x00)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev.
0x02)
re0: interrupting at ioapic0 pin 18
re0: Ethernet address 00:1f:d0:a2:49:3f
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ahcisata0 at pci0 dev 17 function 0: vendor 0x1002 product 0x4391 (rev. 0x00)
ahcisata0: interrupting at ioapic0 pin 22
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.10, 6 ports, 32 slots, CAP
0xf722ff85<CCCS,PSC,SSC,PMD,SPM,ISS=0x2=Gen2,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci0: interrupting at ioapic0 pin 16
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 18 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
ohci1: interrupting at ioapic0 pin 16
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci0: applying AMD SB600/SB700 USB freeze workaround
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
ohci2 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb3 at ohci2: USB revision 1.0
ohci3 at pci0 dev 19 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
ohci3: interrupting at ioapic0 pin 18
ohci3: OHCI version 1.0, legacy support
usb4 at ohci3: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci1: applying AMD SB600/SB700 USB freeze workaround
ehci1: interrupting at ioapic0 pin 19
ehci1: dropped intr workaround enabled
ehci1: EHCI version 1.0
ehci1: companion controllers, 3 ports each: ohci2 ohci3
usb5 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 0x1002 product 0x4385 (rev. 0x3a)
piixpm0: interrupting at SMI, polling
iic0 at piixpm0: I2C bus
ixpide0 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev.
0x00)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to compatibility mode
ixpide0: primary channel interrupting at ioapic0 pin 14
atabus6 at ixpide0 channel 0
ixpide0: secondary channel configured to compatibility mode
ixpide0: secondary channel interrupting at ioapic0 pin 15
atabus7 at ixpide0 channel 1
hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 16
hdafg1 at hdaudio1: Realtek ALC885
hdafg1: DAC00 8ch: Speaker [Jack]
hdafg1: DAC01 2ch: HP Out [Jack]
hdafg1: DIG02 2ch: SPDIF Out [Jack]
hdafg1: ADC03 2ch: Line In [Jack], Mic In [Jack]
hdafg1: ADC04 2ch: Mic In [Jack]
hdafg1: DIG-In05 2ch: SPDIF In [Jack]
hdafg1: 8ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, independent
pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x439d (rev. 0x00)
ppb2 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x00)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
fwohci0 at pci3 dev 14 function 0: vendor 0x104c product 0x8024 (rev. 0x00)
fwohci0: interrupting at ioapic0 pin 22
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:a8:6e:8d:00:00:1f:d0
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
ohci4 at pci0 dev 20 function 5: vendor 0x1002 product 0x4399 (rev. 0x00)
ohci4: interrupting at ioapic0 pin 18
ohci4: OHCI version 1.0, legacy support
usb6 at ohci4: USB revision 1.0
pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1202 (rev. 0x00)
pchb4 at pci0 dev 24 function 3: vendor 0x1022 product 0x1203 (rev. 0x00)
amdtemp0 at pchb4: AMD CPU Temperature Sensors (Family10h)
pchb5 at pci0 dev 24 function 4: vendor 0x1022 product 0x1204 (rev. 0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2812988950 Hz quality 3000
uhub0 at usb2: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 6 ports with 6 removable, self powered
uhub1 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 6 ports with 6 removable, self powered
uhub2 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
uhub3 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
uhub4 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 3 ports with 3 removable, self powered
uhub5 at usb6: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 3 ports with 3 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 2: device present, speed: 3.0Gb/s
ahcisata0 port 3: device present, speed: 3.0Gb/s
ahcisata0 port 4: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0
wd0: <TOSHIBA MK1665GSX>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
(using DMA)
wd1 at atabus1 drive 0
wd1: <WDC WD10EAVS-00M4B0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
(using DMA)
wd2 at atabus2 drive 0
wd2: <WDC WD10EAVS-00M4B0>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
(using DMA)
wd3 at atabus3 drive 0
wd3: <WDC WD10EAVS-00D7B0>
wd3: drive supports 16-sector PIO transfers, LBA48 addressing
wd3: 931 GB, 1938018 cyl, 16 head, 63 sec, 512 bytes/sect x 1953523055 sectors
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd3(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
(using DMA)
wd4 at atabus4 drive 0
wd4: <WDC WD10EAVS-00D7B0>
wd4: drive supports 16-sector PIO transfers, LBA48 addressing
wd4: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd4: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd4(ahcisata0:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
(using DMA)
umass0 at uhub0 port 2 configuration 1 interface 0
umass0: HLDS Inc SuperMulti RW, rev 2.00/1.59, addr 2
umass0: using ATAPI over Bulk-Only
atapibus0 at umass0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST, DVDRAM GE20LU10, FE06> cdrom removable
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0-19-generic (buildd@allspice) (gcc version
4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #29-Ubuntu SMP Wed Apr 17 18:16:28 UTC
2013 (Ubuntu 3.8.0-19.29-generic 3.8.8)
[ 0.000000] Command line: file=/cdrom/preseed/ubuntu.seed boot=casper
initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfddffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfde0000-0x00000000cfde2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfde3000-0x00000000cfdeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfdf0000-0x00000000cfdfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000127ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd.
GA-MA790GP-DS4H/GA-MA790GP-DS4H, BIOS F6 09/16/2009
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x128000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back
[ 0.000000] 5 base 000120000000 mask FFFFF8000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000128000000 aka 4736M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 5, base: 4608MB, range: 128MB, type WB
[ 0.000000] total RAM covered: 3326M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 4 lose cover RAM:
0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC
[ 0.000000] e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcfde0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f5770-0x000f577f] mapped at
[ffff8800000f5770]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xcfddffff]
[ 0.000000] [mem 0x00000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xcfbfffff] page 2M
[ 0.000000] [mem 0xcfc00000-0xcfddffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xcfddffff @ [mem
0x1fffd000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x127ffffff]
[ 0.000000] [mem 0x100000000-0x127ffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x127ffffff @ [mem
0xcfdde000-0xcfddffff]
[ 0.000000] RAMDISK: [mem 0x7eac7000-0x7fffffff]
[ 0.000000] ACPI: RSDP 00000000000f7110 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfde3000 00034 (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfde3040 00074 (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfde30c0 0743A (v01 GBT GBTUACPI 00001000
MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000cfde0000 00040
[ 0.000000] ACPI: HPET 00000000cfdea5c0 00038 (v01 GBT GBTUACPI 42302E31
GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfdea600 0003C (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: APIC 00000000cfdea500 00084 (v01 GBT GBTUACPI 42302E31
GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000127ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x127ffffff]
[ 0.000000] NODE_DATA [mem 0x127ffb000-0x127ffffff]
[ 0.000000] [ffffea0000000000-ffffea00049fffff] PMD ->
[ffff880123800000-ffff8801275fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x127ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xcfddffff]
[ 0.000000] node 0: [mem 0x100000000-0x127ffffff]
[ 0.000000] On node 0 totalpages: 1015151
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13240 pages used for memmap
[ 0.000000] DMA32 zone: 834088 pages, LIFO batch:31
[ 0.000000] Normal zone: 2560 pages used for memmap
[ 0.000000] Normal zone: 161280 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfde0000 - 00000000cfde3000
[ 0.000000] PM: Registered nosave memory: 00000000cfde3000 - 00000000cfdf0000
[ 0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfe00000
[ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] e820: [mem 0xcfe00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880127c00000 s85056 r8192
d21440 u524288
[ 0.000000] pcpu-alloc: s85056 r8192 d21440 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 999281
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper
initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 402a000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 3827520k/4849664k available (7006k kernel code, 789060k
absent, 233084k reserved, 6238k data, 992k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16252928 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.004000] tsc: Fast TSC calibration using PIT
[ 0.008000] tsc: Detected 2812.808 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer
frequency.. 5625.61 BogoMIPS (lpj=11251232)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000028] Security Framework initialized
[ 0.000039] AppArmor: AppArmor initialized
[ 0.000040] Yama: becoming mindful.
[ 0.000302] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.001545] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002069] Mount-cache hash table entries: 256
[ 0.002228] Initializing cgroup subsys cpuacct
[ 0.002230] Initializing cgroup subsys memory
[ 0.002238] Initializing cgroup subsys devices
[ 0.002239] Initializing cgroup subsys freezer
[ 0.002241] Initializing cgroup subsys blkio
[ 0.002242] Initializing cgroup subsys perf_event
[ 0.002244] Initializing cgroup subsys hugetlb
[ 0.002264] tseg: 00cfe00000
[ 0.002266] CPU: Physical Processor ID: 0
[ 0.002267] CPU: Processor Core ID: 0
[ 0.002269] mce: CPU supports 6 MCE banks
[ 0.002274] LVT offset 0 assigned for vector 0xf9
[ 0.002278] process: using AMD E400 aware idle routine
[ 0.002280] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.002280] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[ 0.002280] tlb_flushall_shift: 4
[ 0.002379] Freeing SMP alternatives: 24k freed
[ 0.003756] ACPI: Core revision 20121018
[ 0.015878] ftrace: allocating 26689 entries in 105 pages
[ 0.026801] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.066490] smpboot: CPU0: AMD Phenom(tm) II X4 920 Processor (fam: 10,
model: 04, stepping: 02)
[ 0.170701] Performance Events: AMD PMU driver.
[ 0.170705] ... version: 0
[ 0.170706] ... bit width: 48
[ 0.170707] ... generic registers: 4
[ 0.170708] ... value mask: 0000ffffffffffff
[ 0.170709] ... max period: 00007fffffffffff
[ 0.170710] ... fixed-purpose events: 0
[ 0.170711] ... event mask: 000000000000000f
[ 0.171593] NMI watchdog: enabled on all CPUs, permanently consumes one
hw-PMU counter.
[ 0.184750] process: System has AMD C1E enabled
[ 0.184769] process: Switch to broadcast mode on CPU1
[ 0.197860] process: Switch to broadcast mode on CPU2
[ 0.171659] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.210887] Brought up 4 CPUs
[ 0.210890] smpboot: Total of 4 processors activated (22502.46 BogoMIPS)
[ 0.210943] process: Switch to broadcast mode on CPU3
[ 0.215795] process: Switch to broadcast mode on CPU0
[ 0.215950] devtmpfs: initialized
[ 0.217043] EVM: security.selinux
[ 0.217044] EVM: security.SMACK64
[ 0.217045] EVM: security.capability
[ 0.217128] PM: Registering ACPI NVS region [mem 0xcfde0000-0xcfde2fff]
(12288 bytes)
[ 0.217957] regulator-dummy: no parameters
[ 0.218000] NET: Registered protocol family 16
[ 0.218089] node 0 link 0: io port [c000, ffff]
[ 0.218091] TOM: 00000000d8000000 aka 3456M
[ 0.218094] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[ 0.218095] node 0 link 0: mmio [a0000, bffff]
[ 0.218098] node 0 link 0: mmio [d8000000, dfffffff]
[ 0.218099] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.218101] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
[ 0.218103] TOM2: 0000000128000000 aka 4736M
[ 0.218105] bus: [bus 00-03] on node 0 link 0
[ 0.218106] bus: 00 [io 0x0000-0xffff]
[ 0.218108] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.218109] bus: 00 [mem 0xd8000000-0xdfffffff]
[ 0.218110] bus: 00 [mem 0xe0400000-0xffffffff]
[ 0.218111] bus: 00 [mem 0xe0100000-0xe03fffff]
[ 0.218112] bus: 00 [mem 0x128000000-0xfcffffffff]
[ 0.218204] ACPI: bus type pci registered
[ 0.218252] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.218254] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.228909] PCI: Using configuration type 1 for base access
[ 0.229755] bio: create slab <bio-0> at 0
[ 0.229840] ACPI: Added _OSI(Module Device)
[ 0.229841] ACPI: Added _OSI(Processor Device)
[ 0.229843] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.229844] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.230396] ACPI: EC: Look up EC in DSDT
[ 0.233316] ACPI: Interpreter enabled
[ 0.233320] ACPI: (supports S0 S3 S4 S5)
[ 0.233333] ACPI: Using IOAPIC for interrupt routing
[ 0.236466] ACPI: No dock devices found.
[ 0.236470] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.236514] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.236516] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.236726] PCI host bridge to bus 0000:00
[ 0.236729] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.236731] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.236733] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.236735] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.236737] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.236738] pci_bus 0000:00: root bus resource [mem 0xd7f00000-0xfebfffff]
[ 0.236749] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
[ 0.236760] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.236815] pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
[ 0.236857] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
[ 0.236889] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.236915] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.236934] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 0.236943] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 0.236953] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 0.236962] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.236971] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.236981] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.237038] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.237051] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.237115] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.237128] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.237197] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.237216] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
[ 0.237298] pci 0000:00:12.2: supports D1 D2
[ 0.237299] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.237323] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.237336] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.237400] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.237413] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.237482] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.237501] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.237583] pci 0000:00:13.2: supports D1 D2
[ 0.237584] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.237610] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.237709] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.237725] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.237734] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.237743] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.237752] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.237762] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
[ 0.237820] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.237841] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.237906] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.237921] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.237996] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.238039] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.238052] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
[ 0.238119] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.238134] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.238146] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.238158] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.238173] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.238213] pci 0000:01:05.0: [1002:9614] type 00 class 0x030000
[ 0.238221] pci 0000:01:05.0: reg 10: [mem 0xd8000000-0xdfffffff pref]
[ 0.238225] pci 0000:01:05.0: reg 14: [io 0xee00-0xeeff]
[ 0.238229] pci 0000:01:05.0: reg 18: [mem 0xfdfe0000-0xfdfeffff]
[ 0.238238] pci 0000:01:05.0: reg 24: [mem 0xfde00000-0xfdefffff]
[ 0.238255] pci 0000:01:05.0: supports D1 D2
[ 0.238264] pci 0000:01:05.1: [1002:960f] type 00 class 0x040300
[ 0.238271] pci 0000:01:05.1: reg 10: [mem 0xfdffc000-0xfdffffff]
[ 0.238299] pci 0000:01:05.1: supports D1 D2
[ 0.238335] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.238339] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.238341] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff]
[ 0.238344] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff
64bit pref]
[ 0.238380] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.238392] pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff]
[ 0.238412] pci 0000:02:00.0: reg 18: [mem 0xfdaff000-0xfdafffff 64bit pref]
[ 0.238425] pci 0000:02:00.0: reg 20: [mem 0xfdae0000-0xfdaeffff 64bit pref]
[ 0.238434] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.238480] pci 0000:02:00.0: supports D1 D2
[ 0.238482] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.244869] pci 0000:00:0a.0: PCI bridge to [bus 02]
[ 0.244872] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.244874] pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.244878] pci 0000:00:0a.0: bridge window [mem 0xfda00000-0xfdafffff
64bit pref]
[ 0.244922] pci 0000:03:0e.0: [104c:8024] type 00 class 0x0c0010
[ 0.244944] pci 0000:03:0e.0: reg 10: [mem 0xfdcff000-0xfdcff7ff]
[ 0.244957] pci 0000:03:0e.0: reg 14: [mem 0xfdcf8000-0xfdcfbfff]
[ 0.245049] pci 0000:03:0e.0: supports D1 D2
[ 0.245050] pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.245087] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 0.245090] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.245094] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.245098] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff
pref]
[ 0.245100] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.245102] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.245104] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
[ 0.245106] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff]
(subtractive decode)
[ 0.245107] pci 0000:00:14.4: bridge window [mem 0xd7f00000-0xfebfffff]
(subtractive decode)
[ 0.245146] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.245198] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.245221] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.245243] pci0000:00: ACPI _OSC support notification failed, disabling
PCIe ASPM
[ 0.245244] pci0000:00: Unable to request _OSC control (_OSC support mask:
0x08)
[ 0.246039] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 0.246071] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 0.246101] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 0.246130] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 0.246159] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 0.246188] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 0.246217] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 0.246246] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 0.246343] vgaarb: device added:
PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.246345] vgaarb: loaded
[ 0.246346] vgaarb: bridge control possible 0000:01:05.0
[ 0.246483] SCSI subsystem initialized
[ 0.246485] ACPI: bus type scsi registered
[ 0.246539] libata version 3.00 loaded.
[ 0.246554] ACPI: bus type usb registered
[ 0.246567] usbcore: registered new interface driver usbfs
[ 0.246574] usbcore: registered new interface driver hub
[ 0.246594] usbcore: registered new device driver usb
[ 0.246675] PCI: Using ACPI for IRQ routing
[ 0.255298] PCI: pci_cache_line_size set to 64 bytes
[ 0.255305] pci 0000:00:00.0: no compatible bridge window for [mem
0xe0000000-0xffffffff 64bit]
[ 0.255361] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.255363] e820: reserve RAM buffer [mem 0xcfde0000-0xcfffffff]
[ 0.255431] NetLabel: Initializing
[ 0.255432] NetLabel: domain hash size = 128
[ 0.255433] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.255443] NetLabel: unlabeled traffic allowed by default
[ 0.255513] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.255516] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.257543] Switching to clocksource hpet
[ 0.261672] AppArmor: AppArmor Filesystem Enabled
[ 0.261692] pnp: PnP ACPI init
[ 0.261701] ACPI: bus type pnp registered
[ 0.261772] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.261775] system 00:00: [io 0x0220-0x0225] has been reserved
[ 0.261777] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.261780] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.262300] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because
it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.262318] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled]
because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[ 0.262335] system 00:01: [io 0x4100-0x411f] has been reserved
[ 0.262337] system 00:01: [io 0x0228-0x022f] has been reserved
[ 0.262339] system 00:01: [io 0x040b] has been reserved
[ 0.262341] system 00:01: [io 0x04d6] has been reserved
[ 0.262343] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.262345] system 00:01: [io 0x0c14] has been reserved
[ 0.262347] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 0.262349] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 0.262351] system 00:01: [io 0x0c6f] has been reserved
[ 0.262353] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.262355] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.262357] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 0.262358] system 00:01: [io 0x4000-0x40fe] has been reserved
[ 0.262360] system 00:01: [io 0x4210-0x4217] has been reserved
[ 0.262362] system 00:01: [io 0x0b00-0x0b0f] has been reserved
[ 0.262364] system 00:01: [io 0x0b10-0x0b1f] has been reserved
[ 0.262366] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.262369] system 00:01: [mem 0xfee00400-0xfee00fff window] has been
reserved
[ 0.262371] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.262445] pnp 00:02: [dma 4]
[ 0.262460] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.262517] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.262546] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.262563] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.262588] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.262835] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.263009] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.263102] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.263140] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.263181] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.263183] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.263284] pnp 00:0c: disabling [mem 0x000d1c00-0x000d3fff] because it
overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.263286] pnp 00:0c: disabling [mem 0x000f0000-0x000f7fff] because it
overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.263288] pnp 00:0c: disabling [mem 0x000f8000-0x000fbfff] because it
overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.263291] pnp 00:0c: disabling [mem 0x000fc000-0x000fffff] because it
overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.263293] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it
overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.263295] pnp 00:0c: disabling [mem 0x00100000-0xcfddffff] because it
overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.263327] system 00:0c: [mem 0xcfde0000-0xcfdfffff] could not be reserved
[ 0.263329] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.263331] system 00:0c: [mem 0xcfef0000-0xd7eeffff] could not be reserved
[ 0.263333] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.263335] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.263337] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.263340] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.263355] pnp: PnP ACPI: found 13 devices
[ 0.263356] ACPI: ACPI bus type pnp unregistered
[ 0.269908] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.269911] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.269914] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff]
[ 0.269917] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff
64bit pref]
[ 0.269923] pci 0000:02:00.0: BAR 6: assigned [mem 0xfda00000-0xfda0ffff
pref]
[ 0.269925] pci 0000:00:0a.0: PCI bridge to [bus 02]
[ 0.269927] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.269930] pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.269932] pci 0000:00:0a.0: bridge window [mem 0xfda00000-0xfdafffff
64bit pref]
[ 0.269936] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.269939] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.269944] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.269948] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff
pref]
[ 0.269974] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.269975] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.269977] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.269979] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.269981] pci_bus 0000:00: resource 8 [mem 0xd7f00000-0xfebfffff]
[ 0.269983] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.269985] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdffffff]
[ 0.269987] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit
pref]
[ 0.269988] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.269990] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.269992] pci_bus 0000:02: resource 2 [mem 0xfda00000-0xfdafffff 64bit
pref]
[ 0.269994] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.269996] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.269998] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff pref]
[ 0.270000] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.270001] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.270003] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.270005] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.270007] pci_bus 0000:03: resource 8 [mem 0xd7f00000-0xfebfffff]
[ 0.270038] NET: Registered protocol family 2
[ 0.270164] TCP established hash table entries: 32768 (order: 7, 524288
bytes)
[ 0.270326] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.270465] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.270502] TCP: reno registered
[ 0.270508] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.270535] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.270601] NET: Registered protocol family 1
[ 0.270610] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 108.403427] pci 0000:01:05.0: Boot video device
[ 108.403437] PCI: CLS 4 bytes, default 64
[ 108.403484] Trying to unpack rootfs image as initramfs...
[ 112.293336] Freeing initrd memory: 21732k freed
[ 112.299844] PCI-DMA: Disabling AGP.
[ 112.299939] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 112.299941] PCI-DMA: using GART IOMMU.
[ 112.299943] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 112.303662] LVT offset 1 assigned for vector 0x400
[ 112.303671] IBS: LVT offset 1 assigned
[ 112.303697] perf: AMD IBS detected (0x0000001f)
[ 112.303840] Initialise module verification
[ 112.303874] audit: initializing netlink socket (disabled)
[ 112.303888] type=2000 audit(1380351869.208:1): initialized
[ 112.326499] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 112.327894] VFS: Disk quotas dquot_6.5.2
[ 112.327933] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 112.328406] fuse init (API version 7.20)
[ 112.328472] msgmni has been set to 7646
[ 112.329052] Key type asymmetric registered
[ 112.329054] Asymmetric key parser 'x509' registered
[ 112.329079] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
252)
[ 112.329115] io scheduler noop registered
[ 112.329117] io scheduler deadline registered (default)
[ 112.329121] io scheduler cfq registered
[ 112.329257] pcieport 0000:00:0a.0: irq 40 for MSI/MSI-X
[ 112.329331] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 112.329343] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 112.329429] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 112.329433] ACPI: Power Button [PWRB]
[ 112.329465] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 112.329467] ACPI: Power Button [PWRF]
[ 112.329499] ACPI: processor limited to max C-state 1
[ 112.364643] GHES: HEST is not enabled!
[ 112.364758] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 112.385232] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 112.386622] Linux agpgart interface v0.103
[ 112.387843] brd: module loaded
[ 112.388484] loop: module loaded
[ 112.388799] libphy: Fixed MDIO Bus: probed
[ 112.388848] tun: Universal TUN/TAP device driver, 1.6
[ 112.388850] tun: (C) 1999-2004 Max Krasnyansky <maxk%qualcomm.com@localhost>
[ 112.388887] PPP generic driver version 2.4.2
[ 112.388927] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 112.388928] ehci-pci: EHCI PCI platform driver
[ 112.388982] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 112.388991] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus
number 1
[ 112.389003] QUIRK: Enable AMD PLL fix
[ 112.389006] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI
dummy qh workaround
[ 112.389008] ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze
workaround
[ 112.389021] ehci-pci 0000:00:12.2: debug port 1
[ 112.389066] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 112.398668] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 112.398687] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 112.398689] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 112.398691] usb usb1: Product: EHCI Host Controller
[ 112.398693] usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
[ 112.398694] usb usb1: SerialNumber: 0000:00:12.2
[ 112.398782] hub 1-0:1.0: USB hub found
[ 112.398786] hub 1-0:1.0: 6 ports detected
[ 112.398900] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 112.398905] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus
number 2
[ 112.398908] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI
dummy qh workaround
[ 112.398910] ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze
workaround
[ 112.398923] ehci-pci 0000:00:13.2: debug port 1
[ 112.398958] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
[ 112.410655] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 112.410665] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 112.410666] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 112.410668] usb usb2: Product: EHCI Host Controller
[ 112.410670] usb usb2: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
[ 112.410671] usb usb2: SerialNumber: 0000:00:13.2
[ 112.410745] hub 2-0:1.0: USB hub found
[ 112.410748] hub 2-0:1.0: 6 ports detected
[ 112.410840] ehci-platform: EHCI generic platform driver
[ 112.410846] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 112.410874] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 112.410880] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus
number 3
[ 112.410905] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 112.470625] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 112.470627] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 112.470628] usb usb3: Product: OHCI Host Controller
[ 112.470630] usb usb3: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
[ 112.470631] usb usb3: SerialNumber: 0000:00:12.0
[ 112.470734] hub 3-0:1.0: USB hub found
[ 112.470743] hub 3-0:1.0: 3 ports detected
[ 112.470837] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 112.470841] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus
number 4
[ 112.470853] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 112.530630] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 112.530632] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 112.530633] usb usb4: Product: OHCI Host Controller
[ 112.530635] usb usb4: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
[ 112.530637] usb usb4: SerialNumber: 0000:00:12.1
[ 112.530736] hub 4-0:1.0: USB hub found
[ 112.530747] hub 4-0:1.0: 3 ports detected
[ 112.530841] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 112.530845] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus
number 5
[ 112.530869] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 112.590621] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 112.590623] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 112.590624] usb usb5: Product: OHCI Host Controller
[ 112.590626] usb usb5: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
[ 112.590627] usb usb5: SerialNumber: 0000:00:13.0
[ 112.590725] hub 5-0:1.0: USB hub found
[ 112.590732] hub 5-0:1.0: 3 ports detected
[ 112.590834] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 112.590839] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus
number 6
[ 112.590850] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 112.650623] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 112.650625] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 112.650626] usb usb6: Product: OHCI Host Controller
[ 112.650628] usb usb6: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
[ 112.650629] usb usb6: SerialNumber: 0000:00:13.1
[ 112.650725] hub 6-0:1.0: USB hub found
[ 112.650731] hub 6-0:1.0: 3 ports detected
[ 112.650821] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 112.650827] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus
number 7
[ 112.650838] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
[ 112.710542] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 112.710605] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 112.710607] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 112.710609] usb usb7: Product: OHCI Host Controller
[ 112.710610] usb usb7: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
[ 112.710612] usb usb7: SerialNumber: 0000:00:14.5
[ 112.710697] hub 7-0:1.0: USB hub found
[ 112.710702] hub 7-0:1.0: 2 ports detected
[ 112.710773] uhci_hcd: USB Universal Host Controller Interface driver
[ 112.710837] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 112.711301] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 112.711306] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 112.711430] mousedev: PS/2 mouse device common for all mice
[ 112.711536] rtc_cmos 00:04: RTC can wake from S4
[ 112.711638] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 112.711671] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 112.711744] device-mapper: uevent: version 1.0.3
[ 112.711793] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised:
dm-devel%redhat.com@localhost
[ 112.711799] cpuidle: using governor ladder
[ 112.711800] cpuidle: using governor menu
[ 112.711803] ledtrig-cpu: registered to indicate activity on CPUs
[ 112.711804] EFI Variables Facility v0.08 2004-May-17
[ 112.712017] ashmem: initialized
[ 112.712115] TCP: cubic registered
[ 112.712191] NET: Registered protocol family 10
[ 112.712321] NET: Registered protocol family 17
[ 112.712329] Key type dns_resolver registered
[ 112.712584] Loading module verification certificates
[ 112.713552] MODSIGN: Loaded cert 'Magrathea: Glacier signing key:
d490763cc418e29de79f40a5aa7d97747ec8882c'
[ 112.713561] registered taskstats version 1
[ 112.715730] Key type trusted registered
[ 112.717390] Key type encrypted registered
[ 112.719284] rtc_cmos 00:04: setting system clock to 2013-09-28 07:04:30 UTC
(1380351870)
[ 112.719323] powernow-k8: this CPU is not supported anymore, using
acpi-cpufreq instead.
[ 112.720133] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 112.720135] EDD information not available.
[ 112.721387] Freeing unused kernel memory: 992k freed
[ 112.721616] Write protecting the kernel read-only data: 12288k
[ 112.724706] Freeing unused kernel memory: 1176k freed
[ 112.727716] Freeing unused kernel memory: 1080k freed
[ 112.731911] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[ 112.740316] udevd[111]: starting version 175
[ 112.769769] Disabling lock debugging due to kernel taint
[ 112.770280] ahci 0000:00:11.0: version 3.0
[ 112.770435] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f
impl SATA mode
[ 112.770439] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio
slum part ccc
[ 112.771148] scsi0 : ahci
[ 112.771280] scsi1 : ahci
[ 112.771336] scsi2 : ahci
[ 112.771407] scsi3 : ahci
[ 112.771467] scsi4 : ahci
[ 112.771525] scsi5 : ahci
[ 112.771555] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100
irq 22
[ 112.771557] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180
irq 22
[ 112.771560] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200
irq 22
[ 112.771562] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280
irq 22
[ 112.771565] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300
irq 22
[ 112.771567] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380
irq 22
[ 112.772946] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 112.773120] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
[ 112.773250] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90000646000,
00:1f:d0:a2:49:3f, XID 1c4000c0 IRQ 41
[ 112.773252] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx
checksumming: ko]
[ 112.778786] scsi6 : pata_atiixp
[ 112.779342] scsi7 : pata_atiixp
[ 112.779564] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 112.779566] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 112.785997] wmi: Mapper loaded
[ 112.795284] [drm] Initialized drm 1.1.0 20060810
[ 112.821411] [drm] radeon defaulting to kernel modesetting.
[ 112.821414] [drm] radeon kernel modesetting enabled.
[ 112.821639] [drm] initializing kernel modesetting (RS780 0x1002:0x9614
0x1458:0xD000).
[ 112.821657] [drm] register mmio base: 0xFDFE0000
[ 112.821659] [drm] register mmio size: 65536
[ 112.821922] ATOM BIOS: B27722
[ 112.821939] radeon 0000:01:05.0: VRAM: 128M 0x00000000C0000000 -
0x00000000C7FFFFFF (128M used)
[ 112.821941] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 -
0x00000000BFFFFFFF
[ 112.826616] [drm] Detected VRAM RAM=128M, BAR=128M
[ 112.826619] [drm] RAM width 32bits DDR
[ 112.826694] [TTM] Zone kernel: Available graphics memory: 1959238 kiB
[ 112.826696] [TTM] Initializing pool allocator
[ 112.826699] [TTM] Initializing DMA pool allocator
[ 112.826721] [drm] radeon: 128M of VRAM memory ready
[ 112.826722] [drm] radeon: 512M of GTT memory ready.
[ 112.826735] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 112.826736] [drm] Driver supports precise vblank timestamp query.
[ 112.826750] [drm] radeon: irq initialized.
[ 112.826754] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 112.827517] [drm] Loading RS780 Microcode
[ 112.847478] usb 1-2: New USB device found, idVendor=152e, idProduct=1640
[ 112.847482] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 112.847484] usb 1-2: Product: SuperMulti RW
[ 112.847486] usb 1-2: Manufacturer: HLDS Inc
[ 112.847487] usb 1-2: SerialNumber: 00101016400163925
[ 112.849858] Initializing USB Mass Storage driver...
[ 112.850075] scsi8 : usb-storage 1-2:1.0
[ 112.850148] usbcore: registered new interface driver usb-storage
[ 112.850150] USB Mass Storage support registered.
[ 112.852168] firewire_ohci 0000:03:0e.0: added OHCI v1.10 device as card 0, 4
IR + 8 IT contexts, quirks 0x2
[ 112.853540] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 112.853602] radeon 0000:01:05.0: WB enabled
[ 112.853605] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr
0x00000000a0000c00 and cpu addr 0xffff88011a7cbc00
[ 112.853607] radeon 0000:01:05.0: fence driver on ring 3 use gpu addr
0x00000000a0000c0c and cpu addr 0xffff88011a7cbc0c
[ 112.853663] radeon 0000:01:05.0: setting latency timer to 64
[ 112.884658] [drm] ring test on 0 succeeded in 1 usecs
[ 112.884714] [drm] ring test on 3 succeeded in 1 usecs
[ 112.884794] [drm] ib test on ring 0 succeeded in 0 usecs
[ 112.884803] [drm] ib test on ring 3 succeeded in 0 usecs
[ 112.884950] [drm] Radeon Display Connectors
[ 112.884951] [drm] Connector 0:
[ 112.884952] [drm] VGA-1
[ 112.884954] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c
0x7e4c
[ 112.884955] [drm] Encoders:
[ 112.884956] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 112.884957] [drm] Connector 1:
[ 112.884958] [drm] DVI-D-1
[ 112.884959] [drm] HPD1
[ 112.884960] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c
0x7e5c
[ 112.884961] [drm] Encoders:
[ 112.884963] [drm] DFP1: INTERNAL_KLDSCP_LVTMA
[ 112.884979] [drm] radeon: power management initialized
[ 112.909703] [drm] fb mappable at 0xD8142000
[ 112.909704] [drm] vram apper at 0xD8000000
[ 112.909705] [drm] size 3145728
[ 112.909706] [drm] fb depth is 24
[ 112.909707] [drm] pitch is 4096
[ 112.909784] fbcon: radeondrmfb (fb0) is primary device
[ 112.929352] Console: switching to colour frame buffer device 128x48
[ 112.932009] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 112.932011] radeon 0000:01:05.0: registered panic notifier
[ 112.932015] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:05.0 on
minor 0
[ 113.083138] xor: automatically using best checksumming function:
[ 113.090537] ata6: SATA link down (SStatus 0 SControl 300)
[ 113.122436] generic_sse: 10769.000 MB/sec
[ 113.124421] device-mapper: dm-raid45: initialized v0.2594b
[ 113.262542] ata1: softreset failed (device not ready)
[ 113.262546] ata1: applying PMP SRST workaround and retrying
[ 113.262568] ata2: softreset failed (device not ready)
[ 113.262573] ata2: applying PMP SRST workaround and retrying
[ 113.302550] tsc: Refined TSC clocksource calibration: 2812.810 MHz
[ 113.302555] Switching to clocksource tsc
[ 113.374520] ata4: softreset failed (device not ready)
[ 113.374524] ata4: applying PMP SRST workaround and retrying
[ 113.374541] ata5: softreset failed (device not ready)
[ 113.374545] ata5: applying PMP SRST workaround and retrying
[ 113.394580] firewire_core 0000:03:0e.0: created device fw0: GUID
00a86e8d00001fd0, S400
[ 113.434512] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 113.434538] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 113.457591] ata1.00: ATA-8: TOSHIBA MK1665GSX, GJ002J, max UDMA/100
[ 113.457594] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 113.458794] ata1.00: configured for UDMA/100
[ 113.458927] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1665GS GJ00
PQ: 0 ANSI: 5
[ 113.459071] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149
GiB)
[ 113.459079] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 113.459104] sd 0:0:0:0: [sda] Write Protect is off
[ 113.459107] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 113.459121] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 113.517840] sda: sda1
[ 113.517840] sda1: <netbsd: sda5 sda6 sda7 sda8 sda9 sda10 >
[ 113.518263] sd 0:0:0:0: [sda] Attached SCSI disk
[ 113.546488] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 113.546514] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 113.578398] ata4.00: HPA detected: current 1953523055, native 1953525168
[ 113.578406] ata5.00: ATA-8: WDC WD10EAVS-00D7B0, 01.01A01, max UDMA/133
[ 113.578410] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 113.578621] ata4.00: ATA-8: WDC WD10EAVS-00D7B0, 01.01A01, max UDMA/133
[ 113.578623] ata4.00: 1953523055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 113.579743] ata5.00: configured for UDMA/133
[ 113.579960] ata4.00: configured for UDMA/133
[ 113.848416] scsi 8:0:0:0: CD-ROM HL-DT-ST DVDRAM GE20LU10 FE06
PQ: 0 ANSI: 0
[ 113.853243] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2
cdda tray
[ 113.853246] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 113.853332] sr 8:0:0:0: Attached scsi CD-ROM sr0
[ 113.853412] sr 8:0:0:0: Attached scsi generic sg1 type 5
[ 113.962817] ata2.00: ATA-8: WDC WD10EAVS-00M4B0, 01.00A01, max UDMA/133
[ 113.962820] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 113.965700] ata2.00: configured for UDMA/133
[ 113.965808] scsi 1:0:0:0: Direct-Access ATA WDC WD10EAVS-00M 01.0
PQ: 0 ANSI: 5
[ 113.965945] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 113.965959] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 113.965989] sd 1:0:0:0: [sdb] Write Protect is off
[ 113.965992] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 113.966005] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 113.973255] sdb: unknown partition table
[ 113.973442] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 114.158396] ata3: softreset failed (device not ready)
[ 114.158400] ata3: applying PMP SRST workaround and retrying
[ 114.330381] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 114.370790] ata3.00: ATA-8: WDC WD10EAVS-00M4B0, 01.00A01, max UDMA/133
[ 114.370794] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 114.373089] ata3.00: configured for UDMA/133
[ 114.373218] scsi 2:0:0:0: Direct-Access ATA WDC WD10EAVS-00M 01.0
PQ: 0 ANSI: 5
[ 114.373351] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 114.373357] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 114.373385] sd 2:0:0:0: [sdc] Write Protect is off
[ 114.373388] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 114.373407] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 114.373482] scsi 3:0:0:0: Direct-Access ATA WDC WD10EAVS-00D 01.0
PQ: 0 ANSI: 5
[ 114.373619] sd 3:0:0:0: [sdd] 1953523055 512-byte logical blocks: (1.00
TB/931 GiB)
[ 114.373637] sd 3:0:0:0: Attached scsi generic sg4 type 0
[ 114.373653] sd 3:0:0:0: [sdd] Write Protect is off
[ 114.373655] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 114.373680] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 114.373773] scsi 4:0:0:0: Direct-Access ATA WDC WD10EAVS-00D 01.0
PQ: 0 ANSI: 5
[ 114.373944] sd 4:0:0:0: Attached scsi generic sg5 type 0
[ 114.374254] sd 4:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 114.374290] sd 4:0:0:0: [sde] Write Protect is off
[ 114.374292] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 114.374305] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 114.381622] sdc: unknown partition table
[ 114.381802] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 114.383144] sde: unknown partition table
[ 114.383331] sd 4:0:0:0: [sde] Attached SCSI disk
[ 114.385120] sdd: unknown partition table
[ 114.385230] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 116.501206] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 116.511282] ISO 9660 Extensions: RRIP_1991A
[ 117.067485] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 164.899484] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 165.282590] udevd[1386]: starting version 175
[ 169.003142] init: avahi-cups-reload main process (1644) terminated with
status 1
[ 169.478540] microcode: CPU0: patch_level=0x01000086
[ 169.788386] microcode: CPU0: new patch_level=0x010000db
[ 169.788399] microcode: CPU1: patch_level=0x01000086
[ 169.788407] microcode: CPU1: new patch_level=0x010000db
[ 169.788412] microcode: CPU2: patch_level=0x01000086
[ 169.788418] microcode: CPU2: new patch_level=0x010000db
[ 169.788425] microcode: CPU3: patch_level=0x01000086
[ 169.788433] microcode: CPU3: new patch_level=0x010000db
[ 169.788495] microcode: Microcode Update Driver: v2.00
<tigran%aivazian.fsnet.co.uk@localhost>, Peter Oruba
[ 170.170239] lp: driver loaded but no devices found
[ 170.335849] device-mapper: multipath: version 1.5.1 loaded
[ 170.857045] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO
conflicts with Region \SOR1 1 (20121018/utaddress-251)
[ 170.857052] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 171.008405] Bluetooth: Core ver 2.16
[ 171.008426] NET: Registered protocol family 31
[ 171.008427] Bluetooth: HCI device and connection manager initialized
[ 171.008435] Bluetooth: HCI socket layer initialized
[ 171.008437] Bluetooth: L2CAP socket layer initialized
[ 171.008441] Bluetooth: SCO socket layer initialized
[ 171.008788] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 171.085599] MCE: In-kernel MCE decoding enabled.
[ 171.086201] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring
disabled
[ 171.141597] EDAC MC: Ver: 3.0.0
[ 171.215024] ppdev: user-space parallel port driver
[ 171.215612] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 171.215663] sp5100_tco: PCI Revision ID: 0x3a
[ 171.215679] sp5100_tco: failed to find MMIO address, giving up.
[ 171.278740] Bluetooth: RFCOMM TTY layer initialized
[ 171.278751] Bluetooth: RFCOMM socket layer initialized
[ 171.278752] Bluetooth: RFCOMM ver 1.11
[ 171.342204] AMD64 EDAC driver v3.4.0
[ 171.342235] EDAC amd64: DRAM ECC disabled.
[ 171.342240] EDAC amd64: ECC disabled in the BIOS or no ECC capability,
module will not load.
[ 171.342240] Either enable ECC checking or force module loading by setting
'ecc_enable_override'.
[ 171.342240] (Note that use of the override may cause unknown side effects.)
[ 171.470213] parport_pc 00:08: reported by Plug and Play ACPI
[ 171.470242] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 171.484742] init: failsafe main process (1592) killed by TERM signal
[ 171.584537] lp0: using parport0 (interrupt-driven).
[ 171.940611] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 171.940614] Bluetooth: BNEP filters: protocol multicast
[ 171.940623] Bluetooth: BNEP socket layer initialized
[ 172.463701] kvm: Nested Virtualization enabled
[ 172.463705] kvm: Nested Paging enabled
[ 174.285439] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10
00 64
[ 174.531054] input: HDA ATI SB Line as
/devices/pci0000:00/0000:00:14.2/sound/card0/input3
[ 174.531145] input: HDA ATI SB Rear Mic as
/devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 174.531208] input: HDA ATI SB Front Mic as
/devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 174.531261] input: HDA ATI SB Front Headphone as
/devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 174.531314] input: HDA ATI SB Line Out Side as
/devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 174.531367] input: HDA ATI SB Line Out CLFE as
/devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 174.531423] input: HDA ATI SB Line Out Surround as
/devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 174.531474] input: HDA ATI SB Line Out Front as
/devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 174.531770] snd_hda_intel 0000:01:05.1: setting latency timer to 64
[ 174.877006] psmouse serio1: bad data from KBC - timeout
[ 175.007060] psmouse serio1: bad data from KBC - timeout
[ 175.035727] psmouse serio1: bad data from KBC - timeout
[ 175.064304] psmouse serio1: bad data from KBC - timeout
[ 175.093078] psmouse serio1: bad data from KBC - timeout
[ 175.121737] psmouse serio1: bad data from KBC - timeout
[ 175.150320] psmouse serio1: bad data from KBC - timeout
[ 175.179058] psmouse serio1: bad data from KBC - timeout
[ 175.207743] psmouse serio1: bad data from KBC - timeout
[ 175.236409] psmouse serio1: bad data from KBC - timeout
[ 175.273824] input: PS/2 Generic Mouse as
/devices/platform/i8042/serio1/input/input11
[ 175.387495] input: HDA ATI HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input12
[ 183.239139] init: alsa-restore main process (1901) terminated with status 99
[ 184.534204] r8169 0000:02:00.0 eth0: link down
[ 184.534223] r8169 0000:02:00.0 eth0: link down
[ 184.534239] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 184.534482] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 187.263163] r8169 0000:02:00.0 eth0: link up
[ 187.263172] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 480.122755] systemd-hostnamed[6844]: Warning: nss-myhostname is not
installed. Changing the local hostname might make it unresolveable. Please
install nss-myhostname!
Home |
Main Index |
Thread Index |
Old Index