Help selecting controller for HP LTO-4 Autoloader tape changer

["Scott Burns" <Scott.Burns%SeQent.Com@localhost>]

I am looking for a tape changer solution for numerous HP DL380 G5 machines
running NetBSD/amd64 5.1.

 

They all have the traditional HP Smart Array 3 controllers:

 

ciss0 at pci7 dev 0 function 0: HP Smart Array 3

ciss0: interrupting at ioapic0 pin 18

ciss0: 2 LDs, HW rev 3, FW 7.22/7.22

scsibus0 at ciss0: 2 targets, 1 lun per target

 

I am looking at the following unit as I have had good luck with the LTO-3
SCSI version of this unit:

 

HP 1/8 G2 LTO-4 Ultrium 1760 SAS Tape Autoloader (AK377A)

 

My question is what controller do I need to order that NetBSD will support
for drive and changer support with this auto-loader?

 

Thank you in advance

 

Scott Burns

Scott.Burns%SeQent.Com@localhost

 

 

dmesg below:

NetBSD 5.1 (GENERIC) #0: Sat Nov  6 13:19:33 UTC 2010

 
builds%b6.netbsd.org@localhost:/home/builds/ab/netbsd-5-1-RELEASE/amd64/201011061

43Z-obj/home/builds/ab/netbsd-5-1-RELEASE/src/sys/arch/amd64/compile/GENERIC

total memory = 16381 MB

avail memory = 15868 MB

timecounter: Timecounters tick every 10.000 msec

timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100

SMBIOS rev. 2.4 @ 0xee000 (71 entries)

HP ProLiant DL380 G5

mainbus0 (root)

cpu0 at mainbus0 apid 0: Intel 686-class, 2333MHz, id 0x6fb

cpu1 at mainbus0 apid 4: Intel 686-class, 2333MHz, id 0x6fb

cpu2 at mainbus0 apid 2: Intel 686-class, 2333MHz, id 0x6fb

cpu3 at mainbus0 apid 6: Intel 686-class, 2333MHz, id 0x6fb

cpu4 at mainbus0 apid 1: Intel 686-class, 2333MHz, id 0x6fb

cpu5 at mainbus0 apid 5: Intel 686-class, 2333MHz, id 0x6fb

cpu6 at mainbus0 apid 3: Intel 686-class, 2333MHz, id 0x6fb

cpu7 at mainbus0 apid 7: Intel 686-class, 2333MHz, id 0x6fb

ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 20, 24 pins

acpi0 at mainbus0: Intel ACPICA 20080321

acpi0: X/RSDT: OemId <HP    ,ProLiant,00000002>, AslId <  M-R^D,0000162e>

acpi0: SCI interrupting at int 9

acpi0: fixed-feature power button present

timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000

ACPI-Fast 24-bit timer

MI0 (IPI0001) ACPI Error (nsxfeval-0213): Incorrect return type [Buffer]
requesed [String] [20080321]

at acpi0 not configured

attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0

hpet0 at acpi0 (HPET, PNP0103-0): mem 0xfed00000-0xfed003ff

timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000

pcppi1 at acpi0 (BEEP, PNP0800): io 0x61

midi0 at pcppi1: PC speaker (CPU-intensive output)

sysbeep0 at pcppi1

pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1

pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12

COMA (PNP0501) at acpi0 not configured

acpitz0 at acpi0 (THM0): critical 31.3C passive 8.3C, passive cooling

attimer1: attached to pcppi1

pckbd0 at pckbc1 (kbd slot)

pckbc1: using irq 1 for kbd slot

wskbd0 at pckbd0: console keyboard

pms0 at pckbc1 (aux slot)

pckbc1: using irq 12 for aux slot

wsmouse0 at pms0 mux 0

ipmi0 at mainbus0

pci0 at mainbus0 bus 0: configuration mode 1

pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok

pchb0 at pci0 dev 0 function 0

pchb0: vendor 0x8086 product 0x25d8 (rev. 0xb1)

ppb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x25e2 (rev. 0xb1)

pci1 at ppb0 bus 9

pci1: i/o space, memory space enabled, rd/line, wr/inv ok

ppb1 at pci1 dev 0 function 0: vendor 0x8086 product 0x3500 (rev. 0x01)

pci2 at ppb1 bus 10

pci2: i/o space, memory space enabled, rd/line, wr/inv ok

ppb2 at pci2 dev 0 function 0: vendor 0x8086 product 0x3510 (rev. 0x01)

pci3 at ppb2 bus 11

pci3: i/o space, memory space enabled, rd/line, wr/inv ok

ppb3 at pci2 dev 1 function 0: vendor 0x8086 product 0x3514 (rev. 0x01)

pci4 at ppb3 bus 14

pci4: i/o space, memory space enabled, rd/line, wr/inv ok

ppb4 at pci2 dev 2 function 0: vendor 0x8086 product 0x3518 (rev. 0x01)

pci5 at ppb4 bus 17

pci5: i/o space, memory space enabled, rd/line, wr/inv ok

ppb5 at pci1 dev 0 function 3: vendor 0x8086 product 0x350c (rev. 0x01)

ppb5: disabling notification events

pci6 at ppb5 bus 18

pci6: i/o space, memory space enabled, rd/line, wr/inv ok

ppb6 at pci0 dev 3 function 0: vendor 0x8086 product 0x25e3 (rev. 0xb1)

pci7 at ppb6 bus 6

pci7: i/o space, memory space enabled, rd/line, wr/inv ok

ciss0 at pci7 dev 0 function 0: HP Smart Array 3

ciss0: interrupting at ioapic0 pin 18

ciss0: 2 LDs, HW rev 3, FW 7.22/7.22

scsibus0 at ciss0: 2 targets, 1 lun per target

ppb7 at pci0 dev 4 function 0: vendor 0x8086 product 0x25f8 (rev. 0xb1)

pci8 at ppb7 bus 19

pci8: i/o space, memory space enabled, rd/line, wr/inv ok

ppb8 at pci0 dev 5 function 0: vendor 0x8086 product 0x25e5 (rev. 0xb1)

pci9 at ppb8 bus 22

pci9: i/o space, memory space enabled, rd/line, wr/inv ok

ppb9 at pci0 dev 6 function 0: vendor 0x8086 product 0x25f9 (rev. 0xb1)

pci10 at ppb9 bus 23

pci10: i/o space, memory space enabled, rd/line, wr/inv ok

ppb10 at pci0 dev 7 function 0: vendor 0x8086 product 0x25e7 (rev. 0xb1)

pci11 at ppb10 bus 26

pci11: i/o space, memory space enabled, rd/line, wr/inv ok

pchb1 at pci0 dev 16 function 0

pchb1: vendor 0x8086 product 0x25f0 (rev. 0xb1)

pchb2 at pci0 dev 16 function 1

pchb2: vendor 0x8086 product 0x25f0 (rev. 0xb1)

pchb3 at pci0 dev 16 function 2

pchb3: vendor 0x8086 product 0x25f0 (rev. 0xb1)

pchb4 at pci0 dev 17 function 0

pchb4: vendor 0x8086 product 0x25f1 (rev. 0xb1)

pchb5 at pci0 dev 19 function 0

pchb5: vendor 0x8086 product 0x25f3 (rev. 0xb1)

pchb6 at pci0 dev 21 function 0

pchb6: vendor 0x8086 product 0x25f5 (rev. 0xb1)

pchb7 at pci0 dev 22 function 0

pchb7: vendor 0x8086 product 0x25f6 (rev. 0xb1)

ppb11 at pci0 dev 28 function 0: vendor 0x8086 product 0x2690 (rev. 0x09)

pci12 at ppb11 bus 2

pci12: i/o space, memory space enabled, rd/line, wr/inv ok

ppb12 at pci12 dev 0 function 0: vendor 0x1166 product 0x0103 (rev. 0xc3)

ppb12: disabling notification events

pci13 at ppb12 bus 3

pci13: i/o space, memory space enabled, rd/line, wr/inv ok

bnx0 at pci13 dev 0 function 0: Broadcom NetXtreme II BCM5708 1000Base-T

bnx0: Ethernet address 00:1c:c4:6a:b5:48

bnx0: interrupting at ioapic0 pin 16

brgphy0 at bnx0 phy 1: BCM5708C 1000BASE-T media interface, rev. 6

brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FX, auto

ppb13 at pci0 dev 28 function 1: vendor 0x8086 product 0x2692 (rev. 0x09)

pci14 at ppb13 bus 4

pci14: i/o space, memory space enabled, rd/line, wr/inv ok

ppb14 at pci14 dev 0 function 0: vendor 0x1166 product 0x0103 (rev. 0xc3)

ppb14: disabling notification events

pci15 at ppb14 bus 5

pci15: i/o space, memory space enabled, rd/line, wr/inv ok

bnx1 at pci15 dev 0 function 0: Broadcom NetXtreme II BCM5708 1000Base-T

bnx1: Ethernet address 00:1c:c4:6a:b5:46

bnx1: interrupting at ioapic0 pin 17

brgphy1 at bnx1 phy 1: BCM5708C 1000BASE-T media interface, rev. 6

brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FX, auto

uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2688 (rev. 0x09)

uhci0: interrupting at ioapic0 pin 16

usb0 at uhci0: USB revision 1.0

uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2689 (rev. 0x09)

uhci1: interrupting at ioapic0 pin 17

usb1 at uhci1: USB revision 1.0

uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x268a (rev. 0x09)

uhci2: interrupting at ioapic0 pin 18

usb2 at uhci2: USB revision 1.0

uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x268b (rev. 0x09)

uhci3: interrupting at ioapic0 pin 19

usb3 at uhci3: USB revision 1.0

ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x268c (rev. 0x09)

ehci0: interrupting at ioapic0 pin 16

ehci0: BIOS has given up ownership

ehci0: EHCI version 1.0

ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3

usb4 at ehci0: USB revision 2.0

ppb15 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xd9)

pci16 at ppb15 bus 1

pci16: i/o space, memory space enabled

vga0 at pci16 dev 3 function 0: vendor 0x1002 product 0x515e (rev. 0x02)

wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0

wsmux1: connecting to wsdisplay0

drm at vga0 not configured

vendor 0x0e11 product 0xb203 (miscellaneous system, revision 0x03) at pci16
dev 4 function 0 not configured

vendor 0x0e11 product 0xb204 (miscellaneous system, revision 0x03) at pci16
dev 4 function 2 not configured

uhci4 at pci16 dev 4 function 4: vendor 0x103c product 0x3300 (rev. 0x00)

uhci4: interrupting at ioapic0 pin 22

usb5 at uhci4: USB revision 1.0

vendor 0x103c product 0x3302 (IPMI serial bus, interface 0x01) at pci16 dev
4 function 6 not configured

ichlpcib0 at pci0 dev 31 function 0

ichlpcib0: vendor 0x8086 product 0x2670 (rev. 0x09)

timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000

ichlpcib0: 24-bit timer

ichlpcib0: TCO timer reboot disabled by hardware; hope SMBIOS properly
handles it.

ichlpcib0: TCO (watchdog) timer configured.

piixide0 at pci0 dev 31 function 1

piixide0: Intel 631xESB/632xESB IDE Controller (rev. 0x09)

piixide0: bus-master DMA support present

piixide0: primary channel configured to compatibility mode

piixide0: primary channel interrupting at ioapic0 pin 14

atabus0 at piixide0 channel 0

piixide0: secondary channel configured to compatibility mode

piixide0: secondary channel interrupting at ioapic0 pin 15

atabus1 at piixide0 channel 1

isa0 at ichlpcib0

com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo

com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo

timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0

timecounter: Timecounter "TSC" frequency 2333430400 Hz quality 3000

scsibus0: waiting 2 seconds for devices to settle...

atapibus0 at atabus0: 2 targets

cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE GCC-C10N, , 2.00> cdrom
removable

cd0: 32-bit data port

cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)

cd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)

uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1

uhub0: 2 ports with 2 removable, self powered

uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1

uhub1: 2 ports with 2 removable, self powered

uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1

uhub2: 2 ports with 2 removable, self powered

uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1

uhub3: 2 ports with 2 removable, self powered

uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1

uhub4: 8 ports with 8 removable, self powered

uhub5 at usb5: vendor 0x103c UHCI root hub, class 9/0, rev 1.00/1.00, addr 1

uhub5: 2 ports with 2 removable, self powered

uhidev0 at uhub5 port 1 configuration 1 interface 0

uhidev0: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1

ukbd0 at uhidev0

sd0 at scsibus0 target 0 lun 0: <HP, LOGICAL VOLUME, 7.22> disk fixed

sd0: 69363 MB, 17409 cyl, 255 head, 32 sec, 512 bytes/sect x 142057440
sectors

sd1 at scsibus0 target 1 lun 0: <HP, LOGICAL VOLUME, 7.22> disk fixed

sd1: 838 GB, 65535 cyl, 255 head, 105 sec, 512 bytes/sect x 1757614684
sectors

wskbd1 at ukbd0 mux 1

wskbd1: connecting to wsdisplay0

uhidev1 at uhub5 port 1 configuration 1 interface 1

uhidev1: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1

ums0 at uhidev1: 3 buttons

wsmouse1 at ums0 mux 0

ipmi0: version 2.0 interface KCS iobase 0xca2/2 spacing 1

Kernelized RAIDframe activated

pad0: outputs: 44100Hz, 16-bit, stereo

audio0 at pad0: half duplex, playback, capture

boot device: sd0

root on sd0a dumps on sd0b

root file system type: ffs

ciss0: normal state on 'ciss0:0' (online)

ciss0: normal state on 'ciss0:1' (online)

wsdisplay0: screen 1 added (80x25, vt100 emulation)

wsdisplay0: screen 2 added (80x25, vt100 emulation)

wsdisplay0: screen 3 added (80x25, vt100 emulation)

wsdisplay0: screen 4 added (80x25, vt100 emulation)