dmesg show-off

[Ignatios Souvatzis <ignatios%cs.uni-bonn.de@localhost>]

HF wanted this posted.

This is from a (new) SunFire X4140  with 2chips x 6 cores/chip AMD
running nearly unchanged 5.0.2/amd64. I've patched aac_pci.c to 
recognize the raid controller, though. (Committed to -current, 
pullup requested.

        -is


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0.2 (GENERIC) #0: Mon May 10 17:27:16 CEST 2010
        
ignatios@random85:/var/itch/sources/5.0/oamd64/sys/arch/amd64/compile/GENERIC
total memory = 32767 MB
avail memory = 31756 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.5 @ 0x9ac00 (84 entries)
Sun Microsystems     Sun Fire X4140 (    )
mainbus0 (root)
cpu0 at mainbus0 apid 8: AMD 686-class, 2200MHz, id 0x100f80
cpu1 at mainbus0 apid 9: AMD 686-class, 2200MHz, id 0x100f80
cpu2 at mainbus0 apid 10: AMD 686-class, 2200MHz, id 0x100f80
cpu3 at mainbus0 apid 11: AMD 686-class, 2200MHz, id 0x100f80
cpu4 at mainbus0 apid 12: AMD 686-class, 2200MHz, id 0x100f80
cpu5 at mainbus0 apid 13: AMD 686-class, 2200MHz, id 0x100f80
cpu6 at mainbus0 apid 16: AMD 686-class, 2200MHz, id 0x100f80
cpu7 at mainbus0 apid 17: AMD 686-class, 2200MHz, id 0x100f80
cpu8 at mainbus0 apid 18: AMD 686-class, 2200MHz, id 0x100f80
cpu9 at mainbus0 apid 19: AMD 686-class, 2200MHz, id 0x100f80
cpu10 at mainbus0 apid 20: AMD 686-class, 2200MHz, id 0x100f80
cpu11 at mainbus0 apid 21: AMD 686-class, 2200MHz, id 0x100f80
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 11, 24 pins
ioapic1 at mainbus0 apid 1: pa 0xddfff000, version 11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <SUN   ,X4x40   ,00000068>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
hpet0 at acpi0 (HPET, PNP0103-0)
hpet0: mem 0xfed00000-0xfed00fff
timecounter: Timecounter "hpet0" frequency 25000000 Hz quality 2000
UAR1 (PNP0501) at acpi0 not configured
BMC (IPI0001) ACPI Error (nsxfeval-0213): Incorrect return type [Buffer] 
requested [String] [20080321]
at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vendor 0x10de product 0x0369 (RAM memory, revision 0xa2) at pci0 dev 0 function 
0 not configured
pcib0 at pci0 dev 1 function 0
pcib0: vendor 0x10de product 0x0364 (rev. 0xa3)
nfsmbc0 at pci0 dev 1 function 1: vendor 0x10de product 0x0368 (rev. 0xa3)
nfsmb0 at nfsmbc0 SMBus 1
iic0 at nfsmb0: I2C bus
nfsmb1 at nfsmbc0 SMBus 2
iic1 at nfsmb1: I2C bus
ohci0 at pci0 dev 2 function 0: vendor 0x10de product 0x036c (rev. 0xa1)
LUB0: Picked IRQ 20 with weight 0
ohci0: interrupting at ioapic0 pin 20
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 2 function 1: vendor 0x10de product 0x036d (rev. 0xa2)
LUB2: Picked IRQ 21 with weight 0
ehci0: interrupting at ioapic0 pin 21
ehci0: EHCI version 1.0
ehci0: companion controller, 10 ports each: ohci0
usb1 at ehci0: USB revision 2.0
viaide0 at pci0 dev 5 function 0
viaide0: NVIDIA MCP55 Serial ATA Controller (rev. 0xa3)
viaide0: bus-master DMA support present
viaide0: primary channel wired to native-PCI mode
LSA0: Picked IRQ 22 with weight 0
viaide0: using ioapic0 pin 22 for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 5 function 1
viaide1: NVIDIA MCP55 Serial ATA Controller (rev. 0xa3)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
LSA1: Picked IRQ 23 with weight 0
viaide1: using ioapic0 pin 23 for native-PCI interrupt
atabus2 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus3 at viaide1 channel 1
viaide2 at pci0 dev 5 function 2
viaide2: NVIDIA MCP55 Serial ATA Controller (rev. 0xa3)
viaide2: bus-master DMA support present
viaide2: primary channel wired to native-PCI mode
LSA2: Picked IRQ 20 with weight 1
viaide2: using ioapic0 pin 20 for native-PCI interrupt
atabus4 at viaide2 channel 0
viaide2: secondary channel wired to native-PCI mode
atabus5 at viaide2 channel 1
ppb0 at pci0 dev 6 function 0: vendor 0x10de product 0x0370 (rev. 0xa2)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 5 function 0: vendor 0x1a03 product 0x2000 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
nfe0 at pci0 dev 8 function 0: vendor 0x10de product 0x0373 (rev. 0xa3)
LMAC: Picked IRQ 21 with weight 1
nfe0: interrupting at ioapic0 pin 21
nfe0: Ethernet address 00:21:28:6f:d3:22
ukphy0 at nfe0 phy 2: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000ac2, model 0x000b, rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
nfe1 at pci0 dev 9 function 0: vendor 0x10de product 0x0373 (rev. 0xa3)
LMAD: Picked IRQ 22 with weight 1
nfe1: interrupting at ioapic0 pin 22
nfe1: Ethernet address 00:21:28:6f:d3:23
ukphy1 at nfe1 phy 3: Generic IEEE 802.3u media interface
ukphy1: OUI 0x000ac2, model 0x000b, rev. 3
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb1 at pci0 dev 10 function 0: vendor 0x10de product 0x0377 (rev. 0xa3)
pci2 at ppb1 bus 2
pci2: no spaces enabled!
ppb2 at pci0 dev 14 function 0: vendor 0x10de product 0x0376 (rev. 0xa3)
pci3 at ppb2 bus 3
pci3: no spaces enabled!
ppb3 at pci0 dev 15 function 0: vendor 0x10de product 0x0375 (rev. 0xa3)
pci4 at ppb3 bus 4
pci4: memory space enabled, rd/line, wr/inv ok
aac0 at pci4 dev 0 function 0: LNEB: Picked IRQ 16 with weight 0
SG-XPCIESAS-R-IN
aac0: interrupting at ioapic0 pin 16
aac0: Enabling 64-bit address support
aac0: Enable 64-bit array support
aac0: New comm. interface enabled
aac0: XScale 80321 at 800MHz, 256MB mem (238MB cache), optional battery present
aac0: Kernel 5.2-0 [Build 16732], Monitor 5.2-0 [Build 16732], S/N AA0796
aac0: Controller supports: 
1f1d7f<SNAPSHOT,CLUSTERS,WCACHE,DATA64,HOSTTIME,RAID50,WINDOW4GB,SOFTERR,SGMAP64,ALARM,NONDASD>
ld0 at aac0 unit 0: Volume
ld0: 136 GB, 17833 cyl, 255 head, 63 sec, 512 bytes/sect x 286494720 sectors
ld1 at aac0 unit 1: Volume
ld1: 136 GB, 17833 cyl, 255 head, 63 sec, 512 bytes/sect x 286494720 sectors
ld2 at aac0 unit 2: Volume
ld2: 136 GB, 17833 cyl, 255 head, 63 sec, 512 bytes/sect x 286494720 sectors
ld3 at aac0 unit 3: Volume
ld3: 136 GB, 17833 cyl, 255 head, 63 sec, 512 bytes/sect x 286494720 sectors
ld4 at aac0 unit 4: Volume
ld4: 136 GB, 17833 cyl, 255 head, 63 sec, 512 bytes/sect x 286494720 sectors
ld5 at aac0 unit 5: Volume
ld5: 136 GB, 17833 cyl, 255 head, 63 sec, 512 bytes/sect x 286494720 sectors
ld6 at aac0 unit 6: Volume
ld6: 136 GB, 17833 cyl, 255 head, 63 sec, 512 bytes/sect x 286494720 sectors
ld7 at aac0 unit 7: Volume
ld7: 136 GB, 17833 cyl, 255 head, 63 sec, 512 bytes/sect x 286494720 sectors
pchb0 at pci0 dev 24 function 0
pchb0: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: vendor 0x1022 product 0x1202 (rev. 0x00)
amdtemp0 at pci0 dev 24 function 3
amdtemp0: AMD CPU Temperature Sensors (Family10h / Family11h)
pchb3 at pci0 dev 24 function 4
pchb3: vendor 0x1022 product 0x1204 (rev. 0x00)
pchb4 at pci0 dev 25 function 0
pchb4: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb5 at pci0 dev 25 function 1
pchb5: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb6 at pci0 dev 25 function 2
pchb6: vendor 0x1022 product 0x1202 (rev. 0x00)
amdtemp1 at pci0 dev 25 function 3
amdtemp1: AMD CPU Temperature Sensors (Family10h / Family11h)
pchb7 at pci0 dev 25 function 4
pchb7: vendor 0x1022 product 0x1204 (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
pci5 at mainbus0 bus 128
pci5: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vendor 0x10de product 0x0369 (RAM memory, revision 0xa2) at pci5 dev 0 function 
0 not configured
vendor 0x10de product 0x0361 (RAM memory, revision 0xa3) at pci5 dev 1 function 
0 not configured
nfsmbc1 at pci5 dev 1 function 1: vendor 0x10de product 0x0368 (rev. 0xa3)
nfsmb2 at nfsmbc1 SMBus 1
iic2 at nfsmb2: I2C bus
nfsmb3 at nfsmbc1 SMBus 2
iic3 at nfsmb3: I2C bus
viaide3 at pci5 dev 5 function 0
viaide3: NVIDIA MCP55 Serial ATA Controller (rev. 0xa3)
viaide3: bus-master DMA support present
viaide3: primary channel wired to native-PCI mode
ISI0: Picked IRQ 44 with weight 0
viaide3: using ioapic1 pin 20 for native-PCI interrupt
atabus6 at viaide3 channel 0
viaide3: secondary channel wired to native-PCI mode
atabus7 at viaide3 channel 1
viaide4 at pci5 dev 5 function 1
viaide4: NVIDIA MCP55 Serial ATA Controller (rev. 0xa3)
viaide4: bus-master DMA support present
viaide4: primary channel wired to native-PCI mode
ISI1: Picked IRQ 45 with weight 0
viaide4: using ioapic1 pin 21 for native-PCI interrupt
atabus8 at viaide4 channel 0
viaide4: secondary channel wired to native-PCI mode
atabus9 at viaide4 channel 1
viaide5 at pci5 dev 5 function 2
viaide5: NVIDIA MCP55 Serial ATA Controller (rev. 0xa3)
viaide5: bus-master DMA support present
viaide5: primary channel wired to native-PCI mode
ISI2: Picked IRQ 46 with weight 0
viaide5: using ioapic1 pin 22 for native-PCI interrupt
atabus10 at viaide5 channel 0
viaide5: secondary channel wired to native-PCI mode
atabus11 at viaide5 channel 1
nfe2 at pci5 dev 8 function 0: vendor 0x10de product 0x0373 (rev. 0xa3)
IIM0: Picked IRQ 47 with weight 0
nfe2: interrupting at ioapic1 pin 23
nfe2: Ethernet address 00:21:28:6f:d3:24
ukphy2 at nfe2 phy 2: Generic IEEE 802.3u media interface
ukphy2: OUI 0x000ac2, model 0x000b, rev. 3
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
nfe3 at pci5 dev 9 function 0: vendor 0x10de product 0x0373 (rev. 0xa3)
IIM1: Picked IRQ 44 with weight 1
nfe3: interrupting at ioapic1 pin 20
nfe3: Ethernet address 00:21:28:6f:d3:25
ukphy3 at nfe3 phy 3: Generic IEEE 802.3u media interface
ukphy3: OUI 0x000ac2, model 0x000b, rev. 3
ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb4 at pci5 dev 11 function 0: vendor 0x10de product 0x0378 (rev. 0xa3)
pci6 at ppb4 bus 129
pci6: no spaces enabled!
ppb5 at pci5 dev 14 function 0: vendor 0x10de product 0x0376 (rev. 0xa3)
pci7 at ppb5 bus 130
pci7: no spaces enabled!
ppb6 at pci5 dev 15 function 0: vendor 0x10de product 0x0377 (rev. 0xa3)
pci8 at ppb6 bus 131
pci8: no spaces enabled!
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2200217150 Hz quality 3000
uhub0 at usb0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
uhub1 at usb1: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
umass0 at uhub1 port 1 configuration 1 interface 0
umass0: Texas Instruments Incorporated 6250 FW: 04.03.02.22.562AD423, rev 
2.00/2.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
uhidev0 at uhub0 port 5 configuration 1 interface 0
uhidev0: American Megatrends Inc. Virtual Keyboard and Mouse, rev 1.10/1.00, 
addr 2, iclass 3/1
uhub2 at uhub1 port 6: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, 
addr 3
uhub2: multiple transaction translators
ukbd0 at uhidev0
uhub2: 4 ports with 4 removable, self powered
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex
boot device: ld0
root on ld0a dumps on ld0b
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub0 port 5 configuration 1 interface 1root file system type: ffs

uhidev1: American Megatrends Inc. Virtual Keyboard and Mouse, rev 1.10/1.00, 
addr 2, iclass 3/1
ums0 at uhidev1
ums0: X report 0x0002 not supported