RE: HDD errors.

["Derrick Lobo" <derrick%givex.com@localhost>]

Still getting these error..

ccd0: error 5 on component 0
sd1(ahd0:0:2:0): Check Condition on CDB: 0x28 00 00 70 fc e0 00 00 10 00
SENSE KEY: Hardware Error
INFO FIELD: 7404777
ASC/ASCQ: No Defect Spare Location Available
FRU CODE: 0x4

ccd0: error 5 on component 0

Any idea what this could.. I have replaced 3 drives on the server.. This is
an HP DL385 I move the drive to another location on the bay and still see
the problem...


Regards

Derrick

-----Original Message-----
From: port-amd64-owner%NetBSD.org@localhost 
[mailto:port-amd64-owner%NetBSD.org@localhost] On
Behalf Of Derrick Lobo
Sent: Friday, September 05, 2008 9:14 AM
To: port-amd64%NetBSD.org@localhost; netbsd-users%netbsd.org@localhost
Subject: HDD errors.

Seeing the following errors on dmesg

ccd0: error 5 on component 0
sd1(ahd0:0:1:0):  DEFERRED ERROR, key = 0x4
sd1(ahd0:0:1:0):  Check Condition on CDB: 0x0a 0a 01 40 10 00
    SENSE KEY:  Hardware Error
   INFO FIELD:  655609
     ASC/ASCQ:  No Defect Spare Location Available
     FRU CODE:  0x4

ccd0: error 5 on component 0
sd1(ahd0:0:1:0):  DEFERRED ERROR, key = 0x4
sd1(ahd0:0:1:0):  Check Condition on CDB: 0x2a 00 00 63 6e 20 00 00 30 00
    SENSE KEY:  Hardware Error
   INFO FIELD:  6516033
     ASC/ASCQ:  No Defect Spare Location Available
     FRU CODE:  0x4

ccd0: error 5 on component 0
sd1(ahd0:0:1:0):  Check Condition on CDB: 0x08 0a 00 f0 30 00
    SENSE KEY:  Hardware Error
   INFO FIELD:  655609
     ASC/ASCQ:  No Defect Spare Location Available
     FRU CODE:  0x4

ccd0: error 5 on component 0
sd1(ahd0:0:1:0):  Check Condition on CDB: 0x08 07 6a e0 20 00
    SENSE KEY:  Hardware Error
   INFO FIELD:  486126
     ASC/ASCQ:  No Defect Spare Location Available
     FRU CODE:  0x4

ccd0: error 5 on component 0
sd1(ahd0:0:1:0):  Check Condition on CDB: 0x08 07 6a e0 20 00
    SENSE KEY:  Hardware Error
   INFO FIELD:  486126
     ASC/ASCQ:  No Defect Spare Location Available
     FRU CODE:  0x4

I have changed the drive 3 times but I still key getting this error... I
will try to replace the SCSI controller to see if the message goes away..
could also be a failed port on the backplane.
 

Regards

Derrick