Hello!

My new Core 2 Quad (dmesg below) workstation has an Intel chipset 
(including graphics). To my surprise there appears to be no i810 server 
for X11 in 4.0 RC4. Somewhere I read, that the i810 server is not built 
on the AMD64 platform. Is that correct?

It appears it would be desireable to have this server built on AMD64 in 
order to support 64bit machines with integrated Intel graphics.  
Otherwise one has to stick with vesa graphics ...


Best regards, Martin


NetBSD 4.0_RC4 (GENERIC.MP) #0: Thu Nov  8 00:20:39 PST 2007
	builds@wb28:/home/builds/ab/netbsd-4-0-RC4/amd64/200711080452Z-obj/home/builds/ab/netbsd-4-0-RC4/src/sys/arch/amd64/compile/GENERIC.MP
total memory = 4086 MB
avail memory = 3930 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz, 2405.60 MHz
cpu0: features: bffbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: bffbfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,B20,DS,ACPI,MMX>
cpu0: features: bffbfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2: e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR>
cpu0: features3: bffbfbff<SYSCALL/SYSRET,XD,EM64T>
cpu0: L2 cache 4 MB 64B/line 16-way
cpu0: calibrating local timer
cpu0: apic clock running at 269 MHz
cpu0: 64 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz, 2429.51 MHz
cpu1: features: bffbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features: bffbfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,B20,DS,ACPI,MMX>
cpu1: features: bffbfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: features2: e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR>
cpu1: features3: bffbfbff<SYSCALL/SYSRET,XD,EM64T>
cpu1: L2 cache 4 MB 64B/line 16-way
cpu2 at mainbus0: apid 2 (application processor)
cpu2: starting
cpu2: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz, 2429.51 MHz
cpu2: features: bffbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu2: features: bffbfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,B20,DS,ACPI,MMX>
cpu2: features: bffbfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu2: features2: e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR>
cpu2: features3: bffbfbff<SYSCALL/SYSRET,XD,EM64T>
cpu2: L2 cache 4 MB 64B/line 16-way
cpu3 at mainbus0: apid 3 (application processor)
cpu3: starting
cpu3: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz, 2429.51 MHz
cpu3: features: bffbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu3: features: bffbfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,B20,DS,ACPI,MMX>
cpu3: features: bffbfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu3: features2: e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR>
cpu3: features3: bffbfbff<SYSCALL/SYSRET,XD,EM64T>
cpu3: L2 cache 4 MB 64B/line 16-way
ioapic0 at mainbus0 apid 4 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <A_M_I_,OEMXSDT ,11000713>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A08 [PCI Express/PCI-X Mode-2 Host Bridge] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
pcppi1: children must have an explicit unit
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
PNP0C04 [Math Coprocessor] at acpi0 not configured
PNP0700 [PC standard floppy disk controller] at acpi0 not configured
lpt2 at acpi0 (PNP0401)
lpt2: io 0x378-0x37f,0x778-0x77f irq 7 drq 3
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
ATK0110 at acpi0 not configured
PNP0103 [HPET Timer] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
pcppi1: attached to attimer1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x29c0 (rev. 0x02)
vga0 at pci0 dev 2 function 0: Intel product 0x29c2 (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
Intel product 0x29c3 (miscellaneous display, revision 0x02) at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0: Intel product 0x2937 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 26 function 1: Intel product 0x2938 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 21 (irq 3)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 26 function 2: Intel product 0x2939 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18 (irq 5)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 26 function 7: Intel product 0x293c (rev. 0x02)
ehci0: interrupting at ioapic0 pin 18 (irq 5)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 22 (irq 4)
azalia0: host: 0x8086/0x293e (rev. 2)
azalia0: host: High Definition Audio rev. 1.0
ppb0 at pci0 dev 28 function 0: Intel product 0x2940 (rev. 0x02)
pci1 at ppb0 bus 3
pci1: memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 4: Intel product 0x2948 (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space enabled, rd/line, wr/inv ok
jmide0 at pci2 dev 0 function 0: JMicron Technology JMB368 PATA controller
jmide0: 1 PATA port
jmide0: interrupting at ioapic0 pin 16 (irq 11)
jmide0: PCI IDE interface used
jmide0: bus-master DMA support present
jmide0: primary channel wired to native-PCI mode
jmide0: primary channel is PATA
atabus0 at jmide0 channel 0
jmide0: secondary channel wired to native-PCI mode
jmide0: secondary channel is unused
ppb2 at pci0 dev 28 function 5: Intel product 0x294a (rev. 0x02)
pci3 at ppb2 bus 1
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
mskc0 at pci3 dev 0 function 0mskc0: interrupt moderation is 0 us
, Yukon-2 EC Ultra rev. B0 (0x3): ioapic0 pin 17 (irq 10)
msk0 at mskc0 port A: Ethernet address 00:1d:60:6d:a2:cb
ukphy0 at msk0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000ac2, model 0x000b, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci3 at pci0 dev 29 function 0: Intel product 0x2934 (rev. 0x02)
uhci3: interrupting at ioapic0 pin 23 (irq 11)
usb4 at uhci3: USB revision 1.0
uhub4 at usb4
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci4 at pci0 dev 29 function 1: Intel product 0x2935 (rev. 0x02)
uhci4: interrupting at ioapic0 pin 19 (irq 10)
usb5 at uhci4: USB revision 1.0
uhub5 at usb5
uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhci5 at pci0 dev 29 function 2: Intel product 0x2936 (rev. 0x02)
uhci5: interrupting at ioapic0 pin 18 (irq 5)
usb6 at uhci5: USB revision 1.0
uhub6 at usb6
uhub6: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
ehci1 at pci0 dev 29 function 7: Intel product 0x293a (rev. 0x02)
ehci1: interrupting at ioapic0 pin 23 (irq 11)
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
uhub7 at usb7
uhub7: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
ppb3 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0x92)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
fwohci0 at pci4 dev 2 function 0: VIA Technologies VT6306 IEEE 1394 Host Controller (rev. 0xc0)
fwohci0: interrupting at ioapic0 pin 20 (irq 5)
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:01:77:1e:2c
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
pcib0 at pci0 dev 31 function 0
pcib0: Intel product 0x2918 (rev. 0x02)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801I Serial ATA Controller (ICH9) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus1 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus2 at piixide0 channel 1
Intel product 0x2930 (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
piixide1 at pci0 dev 31 function 5
piixide1: Intel 82801I Serial ATA Controller (ICH9) (rev. 0x02)
piixide1: bus-master DMA support present
piixide1: primary channel wired to native-PCI mode
piixide1: using ioapic0 pin 22 (irq 4) for native-PCI interrupt
atabus3 at piixide1 channel 0
piixide1: secondary channel wired to native-PCI mode
atabus4 at piixide1 channel 1
isa0 at pcib0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
ioapic0: enabling
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: Realtek ALC883 (rev. 0.2)
azalia0: codec[0]: High Definition Audio rev. 1.0
azalia0: playback: max channels=8, encodings=1<PCM>
azalia0: playback: PCM formats=e0560<24bit,20bit,16bit,192kHz,96kHz,48kHz,44.1kHz>
azalia0: recording: max channels=4, encodings=1<PCM>
azalia0: recording: PCM formats=60160<20bit,16bit,96kHz,48kHz,44.1kHz>
audio0 at azalia0: full duplex, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/43.01, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
wd0 at atabus1 drive 0: <ST3500630NS>
wd0: quirks 2<FORCE_LBA48>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus2 drive 0: <ST3500630NS>
wd1: quirks 2<FORCE_LBA48>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus3: 2 targets
cd0 at atapibus0 drive 0: <TSSTcorpCD/DVDW SH-S183A, , SB02> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cpu1: CPU 1 running
cpu2: CPU 2 running
cpu3: CPU 3 running
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)


-- 
        Martin Bock                                          :wq