Subject: Re: no available disks?
To: None <port-amd64@netbsd.org>
From: Chris Kantarjiev <cak+gmane@dimebank.com>
List: port-amd64
Date: 08/10/2006 14:50:46
Greg Oster wrote:
> Chris Kantarjiev writes:
> 
>>Here's the dmesg from INSTALL.ACPI of 3.99.24. Greg, can you chime in with
>>the 
>>specifics? I'm guessing that MP is turned off...
> 
> 
> Yes... it's turned off...  It's just the 'default' INSTALL_ACPI kernel.. 
> 
> Give me a sec, and I'll bake a INSTALL_MPACPI kernel+cdrom...  (i.e. 
> take INSTALL_ACPI, and add "options         MULTIPROCESSOR") and 
> a (much smaller) GENERIC_MPACPI-booting cdrom too... 
> 

No joy. Doesn't find the disks, doesn't finish booting, crashes...


 >> NetBSD/amd64 BIOS Boot, Revision 3.3
 >> (oster@quadrapus, Fri Aug  4 13:58:01 CST 2006)
 >> Memory: 632/65535 k
 > boot
booting fd0a:netbsd
3736544+5270840+224944=0x9cf0a8
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
     The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.

NetBSD 3.99.24 (INSTALL_MPACPI) #0: Thu Aug 10 11:47:37 CST 2006
 
oster@quadrapus:/u1/builds/build69/src/sys/arch/amd64/compile/INSTALL_MPACPI
total memory = 8143 MB
avail memory = 7848 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
timecounter: selected timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (TEMPLATE ETEMPLATE   )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual Core AMD Opteron(tm) Processor 270, 2000.10 MHz
cpu0: features: f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 16 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Dual Core AMD Opteron(tm) Processor 270, 2000.00 MHz
cpu1: features: f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu1: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu2 at mainbus0: apid 2 (application processor)
cpu2: starting
cpu2: Dual Core AMD Opteron(tm) Processor 270, 2000.00 MHz
cpu2: features: f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu2: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu2: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu3 at mainbus0: apid 3 (application processor)
cpu3: starting
cpu3: Dual Core AMD Opteron(tm) Processor 270, 2000.00 MHz
cpu3: features: f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu3: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu3: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 128 is type PCI
mpbios: bus 129 is type PCI
mpbios: bus 130 is type PCI
mpbios: bus 131 is type ISA
ioapic0 at mainbus0 apid 4 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
ioapic1 at mainbus0 apid 5 (I/O APIC)
ioapic1: pa 0xdfefc000, version 11, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
timecounter: selected timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
acpi: WARNING: no matching I/O apic for SCI, assuming ioapic0
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0800 at acpi0 not configured
PNP0C04 at acpi0 not configured
PNP0501 at acpi0 not configured
PNP0501 at acpi0 not configured
PNP0400 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0303 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0C01 at acpi0 not configured
PNP0A03 at acpi0 not configured
PNP0C0C at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vendor 0x10de product 0x005e (miscellaneous memory, revision 0xa3) at pci0 dev 0 
function 0 not configured
pcib0 at pci0 dev 1 function 0
pcib0: vendor 0x10de product 0x0051 (rev. 0xa3)
vendor 0x10de product 0x0052 (SMBus serial bus, revision 0xa2) at pci0 dev 1 
function 1 not configured
ohci0 at pci0 dev 2 function 0: vendor 0x10de product 0x005a (rev. 0xa2)
ohci0: interrupting at ioapic0 pin 8 (irq 9)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
vendor 0x10de product 0x005b (USB serial bus, interface 0x20, revision 0xa3) at 
pci0 dev 2 function 1 not configured
vendor 0x10de product 0x0059 (audio multimedia, revision 0xa2) at pci0 dev 4 
function 0 not configured
viaide0 at pci0 dev 6 function 0
viaide0: NVIDIA nForce4 IDE Controller (rev. 0xf2)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
isa_intr_establish: no MP mapping found
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
isa_intr_establish: no MP mapping found
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 7 function 0
viaide1: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
pci_intr_map: bus 0 dev 7 func 0 pin 1; line 9
pci_intr_map: no MP mapping found
failed to allocate interrupt slot for PIC pic0 pin 9
viaide1: couldn't establish native-PCI interrupt at irq 9
viaide1: secondary channel wired to native-PCI mode
pci_intr_map: bus 0 dev 7 func 0 pin 1; line 9
pci_intr_map: no MP mapping found
failed to allocate interrupt slot for PIC pic0 pin 9
viaide1: couldn't establish native-PCI interrupt at irq 9
viaide2 at pci0 dev 8 function 0
viaide2: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide2: bus-master DMA support present
viaide2: primary channel wired to native-PCI mode
pci_intr_map: bus 0 dev 8 func 0 pin 1; line 5
pci_intr_map: no MP mapping found
viaide2: using irq 5 for native-PCI interrupt
atabus2 at viaide2 channel 0
viaide2: secondary channel wired to native-PCI mode
atabus3 at viaide2 channel 1
ppb0 at pci0 dev 9 function 0: vendor 0x10de product 0x005c (rev. 0xa2)
pci1 at ppb0 bus 3
pci1: i/o space, memory space enabled
nfe0 at pci0 dev 10 function 0pci_intr_map: bus 0 dev 10 func 0 pin 1; line 11
pci_intr_map: no MP mapping found
: irq 11, address 00:30:48:57:7f:b8
makphy0 at nfe0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb1 at pci0 dev 13 function 0: vendor 0x10de product 0x005d (rev. 0xa3)
pci2 at ppb1 bus 2
pci2: memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 14 function 0: vendor 0x10de product 0x005d (rev. 0xa3)
pci3 at ppb2 bus 1
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci3 dev 0 function 0: vendor 0x10de product 0x0161 (rev. 0xa1)
vga0: WARNING: ignoring 64-bit BAR @ 0x14
vga0: WARNING: ignoring 64-bit BAR @ 0x1c
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
pchb0 at pci0 dev 24 function 0
pchb0: vendor 0x1022 product 0x1100 (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: vendor 0x1022 product 0x1101 (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: vendor 0x1022 product 0x1102 (rev. 0x00)
pchb3 at pci0 dev 24 function 3
pchb3: vendor 0x1022 product 0x1103 (rev. 0x00)
pchb4 at pci0 dev 25 function 0
pchb4: vendor 0x1022 product 0x1100 (rev. 0x00)
pchb5 at pci0 dev 25 function 1
pchb5: vendor 0x1022 product 0x1101 (rev. 0x00)
pchb6 at pci0 dev 25 function 2
pchb6: vendor 0x1022 product 0x1102 (rev. 0x00)
pchb7 at pci0 dev 25 function 3
pchb7: vendor 0x1022 product 0x1103 (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
isa_intr_establish: no MP mapping found
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isa_intr_establish: no MP mapping found
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
isa_intr_establish: no MP mapping found
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
pcppi0: attached to attimer0
ioapic0: enabling
ioapic1: enabling
timecounter: Timecounter "TSC" frequency 2000057410 Hz quality 800
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
md0: internal 5000 KB image area
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <LITE-ON DVDRW SHW-160P6S, , PS0A> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
boot device: <unknown>
root on md0a dumps on md0b
root file system type: ffs˙

(reset to BIOS...)

So, about those mpbios messages?