This is a multi-part message in MIME format.

------=_NextPart_000_014E_01C65559.02547EA0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit

Rick Kelly wrote:
> >Anyone got any ideas on what else I might try?
> 
> Shut off ACPI.

Unfortunately, that doesn't seem to be an option on 
this motherboard/BIOS.  

I've manually transcribed the dmesg output from the
beast and attached it.  Unless someone has any more 
ideas, I guess I'll see if I can make it run i386. 

------=_NextPart_000_014E_01C65559.02547EA0
Content-Type: text/plain;
	name="dmesg.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="dmesg.txt"

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, =
2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.99.15 (INSTALL) #0: Sat Mar  4 20:21:02 MST 2006
        rmk@speedy:/usr/obj/sys/arch/amd64/compile/INSTALL
total memory =3D 2047 MB
avail memory =3D 1964 MB
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+, 2418.10 MHz
cpu0: features: =
f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully =
associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully =
associative
cpu0: calibrating local timer
cpu0: apic clock running at 201 MHz
cpu0: 8 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: not started
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type PCI
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0
ioapic: remapped to apic 2
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vendor 0x10de product 0x005e (miscellaneous memory, revision 0xa3) at =
pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0
pcib0: vendor 0x10de product 0x0050 (rev. 0xa3)
vendor 0x10de product 0x0052 (SMBus serial bus, revision 0xa2) at pci0 =
dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0: vendor 0x10de product 0x005a (rev. 0xa2)
ohci0: interrupting at ioapic pin 3 (irq 3)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
vendor 0x10de product 0x0059 (audio multimedia, revision 0xa2) at pci0 =
dev 4 function 0 not configured
viaide0 at pci0 dev 6 function 0
viaide0: NVIDIA nForce4 IDE Controller (rev. 0xf2)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatability mode
viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatability mode
viaide0: secondary channel ignored (disabled)
viaide1 at pci0 dev 7 function 0
viaide1: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
viaide1: using ioapic0 pin 5 (irq 11) for native-PCI interrupt
atabus1 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus2 at viaide1 channel 1
viaide2 at pci0 dev 8 function 0
viaide2: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide2: bus-master DMA support present
viaide2: primary channel wired to native-PCI mode
viaide2: using ioapic0 pin 11 (irq 5) for native-PCI interrupt
atabus3 at viaide2 channel 0
viaide2: secondary channel wired to native-PCI mode
atabus4 at viaide2 channel 1
ppb0 at pci0 dev 9 function 0: vendor 0x10de product 0x005c (rev. 0xa2)
pci1 at ppb0 bus 5
pci1: i/o space, memory space enabled
vendor 0x10de product 0x0057 (miscellaneous bridge, revision 0xa3) at =
pci0 dev 10 function 0 not configured
ppb1 at pci0 dev 11 function 0: vendor 0x10de product 0x005d (rev. 0xa3)
pci2 at ppb1 bus 4
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 12 function 0: vendor 0x10de product 0x005d (rev. 0xa3)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 13 function 0: vendor 0x10de product 0x005d (revision =
0xa3)
pci4 at ppb3 bus 2
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 14 function 0: vendor 0x10de product 0x005d (revision =
0xa3)
pci5 at ppb4 bus 1
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci5 dev 0 function 0: vendor 0x1002 product 0x5b60 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
vendor 0x1002 product 0x5b70 (miscellaneous display) at pci5 dev 0 =
function 1 not configured
pchb0 at pci0 dev 24 function 0
pchb0: vendor 0x1022 product 0x1100 (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: vendor 0x1022 product 0x1100 (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: vendor 0x1022 product 0x1100 (rev. 0x00)
pchb3 at pci0 dev 24 function 3
pchb3: vendor 0x1022 product 0x1100 (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
sysbeep at pcppi0
pcppi0: attached to attimer0
ioapic0: enabling
md0: internal 5000 KB image area
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <LITE-ON DVDRW SHW-160P6S, , PS08> cdrom =
removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using =
DMA)
uhub1 at uhub0 port 8
uhub1: vendor 0x0557 product 0x7000, class 9/0, rev 1.10/1.00, addr 2
uhub1: 4 ports with 4 removable, self-powered
uhub1: device problem, disabling port 1
wd0 at atabus3 drive 0: <Maxtor 7Y250M0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 233 GB, 486344 cyl, 16 head, 63 sec, 512 bytes/sect x 490234752 =
sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide2:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using =
DMA)
wd1 at atabus4 drive 0: <Maxtor 6L300S0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 279 GB, 581463 cyl, 16 head, 63 sec, 512 bytes/sect x 586114704 =
sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(viaide2:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using =
DMA)
boot device: <unknown>
root on md0a dumps on md0b
root file system type: ffs
warning: no /dev/console
uhub1: at uhub0 port 8 (addr 2) disconnected
uhub1 detached
uhub1 at uhub0 port 8
uhub1: vendor 0x0557 product 0x7000, class 9/0, rev 1.10/1.00, addr 2
uhub1: 4 ports with 4 removable, self-powered
uhub1: device problem, disabling port 1
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: ATEN CS-1734A V3.2.312, rev 1.10/1.00, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1
uhidev1: ATEN CS-1734A V3.2.312, rev 1.10/1.00, addr 3, iclass 3/1
ums0 at uhidev1: 5 buttons and Z dir
wsmouse0 at ums0 mux 0


------=_NextPart_000_014E_01C65559.02547EA0--