Rick Kelly wrote:
> Please, somebody name me a motherboard, which is currently available, that
> will run NetBSD/amd64.
> 
> 

Hi,

this one runs here:
http://tyan.com/products/html/thunderk8sr.html
(model S2881G2NR - no scsi)

NetBSD 3.0 (GENERIC.MP) #0: Sun Dec 18 21:55:15 UTC 2005 
builds@works.netbsd.org:/home/builds/ab/netbsd-3-0-RELEASE/amd64/200512182024Z-obj/home/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/amd64/compile/GENERIC
.MP
total memory = 2047 MB
avail memory = 1956 MB
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (TYAN     S2881       )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Opteron(tm) Processor 248, 2190.97 MHz
cpu0: features: e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 1 MB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully 
associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully 
associative
cpu0: calibrating local timer
cpu0: apic clock running at 199 MHz
cpu0: 16 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: AMD Opteron(tm) Processor 248, 2190.87 MHz
cpu1: features: e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu1: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>
cpu1: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu1: L2 cache 1 MB 64B/line 16-way
cpu1: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully 
associative
cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully 
associative
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type ISA
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
ioapic1 at mainbus0 apid 3 (I/O APIC)
ioapic1: pa 0xfebff000, version 11, 4 pins
ioapic2 at mainbus0 apid 4 (I/O APIC)
ioapic2: pa 0xfebfe000, version 11, 4 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ppb0 at pci0 dev 6 function 0: Advanced Micro Devices AMD8111 I/O Hub 
(rev. 0x07)
pci1 at ppb0 bus 3
pci1: i/o space, memory space enabled
ohci0 at pci1 dev 0 function 0: Advanced Micro Devices AMD8111 USB Host 
Controller (rev. 0x0b)
ohci0: interrupting at ioapic0 pin 19 (irq 9)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Advanced Micro OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci1 dev 0 function 1: Advanced Micro Devices AMD8111 USB Host 
Controller (rev. 0x0b)
ohci1: interrupting at ioapic0 pin 19 (irq 9)
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Advanced Micro OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
satalink0 at pci1 dev 5 function 0
satalink0: Silicon Image SATALink 3114 (rev. 0x02)
satalink0: 33MHz PCI bus
satalink0: bus-master DMA support present
satalink0: using ioapic0 pin 17 (irq 10) for native-PCI interrupt
atabus0 at satalink0 channel 0
atabus1 at satalink0 channel 1
atabus2 at satalink0 channel 2
atabus3 at satalink0 channel 3
vga0 at pci1 dev 6 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0
pcib0: Advanced Micro Devices AMD8111 LPC Controller (rev. 0x05)
viaide0 at pci0 dev 7 function 1
viaide0: Advanced Micro Devices AMD8111 IDE Controller (rev. 0x03)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel ignored (disabled)
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus4 at viaide0 channel 1
Advanced Micro Devices AMD8111 SMBus Controller (SMBus serial bus, 
revision 0x02) at pci0 dev 7 function 2 not configured
Advanced Micro Devices AMD8111 ACPI Controller (miscellaneous bridge, 
revision 0x05) at pci0 dev 7 function 3 not configured
ppb1 at pci0 dev 10 function 0: Advanced Micro Devices AMD8131 PCI-X 
Tunnel (rev. 0x12)
pci2 at ppb1 bus 2
pci2: memory space enabled
bge0 at pci2 dev 9 function 0: Broadcom BCM5704C Dual Gigabit Ethernet
bge0: interrupting at ioapic1 pin 0 (irq 5)
bge0: ASIC BCM5704 A3 (0x2003), Ethernet address 00:e0:81:2b:cc:2a
brgphy0 at bge0 phy 1: BCM5704 1000BASE-T media interface, rev. 0
brgphy0: using BCM5704 DSP patch
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
bge1 at pci2 dev 9 function 1: Broadcom BCM5704C Dual Gigabit Ethernet
bge1: interrupting at ioapic1 pin 1 (irq 10)
bge1: ASIC BCM5704 A3 (0x2003), Ethernet address 00:e0:81:2b:cc:2b
brgphy1 at bge1 phy 1: BCM5704 1000BASE-T media interface, rev. 0
brgphy1: using BCM5704 DSP patch
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
aapic0 at pci0 dev 10 function 1: Advanced Micro Devices AMD8131 IO Apic 
(rev. 0x01)
ppb2 at pci0 dev 11 function 0: Advanced Micro Devices AMD8131 PCI-X 
Tunnel (rev. 0x12)
pci3 at ppb2 bus 1
pci3: memory space enabled
aapic1 at pci0 dev 11 function 1: Advanced Micro Devices AMD8131 IO Apic 
(rev. 0x01)
pchb0 at pci0 dev 24 function 0
pchb0: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 3
pchb3: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
pchb4 at pci0 dev 25 function 0
pchb4: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb5 at pci0 dev 25 function 1
pchb5: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb6 at pci0 dev 25 function 2
pchb6: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb7 at pci0 dev 25 function 3
pchb7: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
ioapic0: enabling
ioapic1: enabling
ioapic2: enabling
Kernelized RAIDframe activated
satalink0: port 0: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0satalink0: port 1: device present, speed: 1.5Gb/s
satalink0: port 2: device present, speed: 1.5Gb/s
satalink0: port 3: device present, speed: 1.5Gb/s
: <ST3250823AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(satalink0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) 
(using DMA)
wd1 at atabus1 drive 0: <ST3250823AS>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(satalink0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) 
(using DMA)
wd2 at atabus2 drive 0: <ST3250823AS>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(satalink0:2:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) 
(using DMA)
wd3 at atabus3 drive 0: <ST3250823AS>
wd3: drive supports 16-sector PIO transfers, LBA48 addressing
wd3: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd3: 32-bit data port
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd3(satalink0:3:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) 
(using DMA)
atapibus0 at atabus4: 2 targets
cd0 at atapibus0 drive 0: <QSI CD-ROM SCR-242, , CXAC> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)

r.