1) i've just got new Athlon 64 system (Microstar motherboard with Nforce3 
250Gb chipset) and i'm trying to install NetBSD.

2.0.2 boots but PIO-mode pciide is used as there is no driver.

so i tried -current, almost success but onboard LAN isn't configured

it looks it isn't even detected!

in BIOS i have choices for onboard LAN as "Disabled" or "Auto" so i set up 
"Auto". there's no choice like "Enabled". LAN connector led lits when 
cable is connected so looks all works.

here is dmesg. i cannot even find that network controller is not 
configured.

2) other problem - when i put some network card to PCI slot, it works but 
strange messages appears like

pci_intr_map: bus 2 dev 7 func 0 pin 4; line 10
pci_intr_map: no MP mapping found


it doesn't appear without this card.

3) how should options like "APIC" and "MPS table version"? i left the 
defaults which are "Enabled" and "1.4" (other choice is 1.1).


thank you very much. i really would like to have my onboard card working 
;)



NetBSD 3.0_BETA (GENERIC) #0: Sun Jul 10 03:10:14 UTC 2005
 	jmc@faith.netbsd.org:/home/builds/ab/netbsd-3/amd64/200507090000Z-obj/home/builds/ab/netbsd-3/src/sys/arch/amd64/compile/GENERIC
total memory = 255 MB
avail memory = 236 MB
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 Processor 2800+, 1808.36 MHz
cpu0: features: e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 8 page colors
mpbios: bus 0 is type PCI 
mpbios: bus 1 is type PCI 
mpbios: bus 2 is type PCI 
mpbios: bus 3 is type ISA 
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Nvidia nForce3 250 Host-PCI bridge (rev. 0xa1)
pcib0 at pci0 dev 1 function 0
pcib0: Nvidia nForce3 250 PCI-ISA bridge (rev. 0xa2)
Nvidia nForce3 250 SMBus Controller (SMBus serial bus, revision 0xa1) at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0: Nvidia nForce3 250 USB Host Controller (rev. 0xa1)
pci_intr_map: bus 0 dev 2 func 0 pin 1; line 10
pci_intr_map: no MP mapping found
ohci0: interrupting at irq 10
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Nvidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1 at pci0 dev 2 function 1: Nvidia nForce3 250 USB Host Controller (rev. 0xa1)
pci_intr_map: bus 0 dev 2 func 1 pin 2; line 10
pci_intr_map: no MP mapping found
ohci1: interrupting at irq 10
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Nvidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
Nvidia nForce3 250 USB2 Host Controller (USB serial bus, interface 0x20, revision 0xa2) at pci0 dev 2 function 2 not configured
Nvidia product 0x00df (miscellaneous bridge, revision 0xa2) at pci0 dev 5 function 0 not configured
auich0 at pci0 dev 6 function 0: nForce3 250 MCP-T AC-97 Audio
auich0: interrupting at ioapic0 pin 11 (irq 11)
auich0: ac97: Avance Logic ALC850 codec; no 3D stereo
auich0: ac97: ext id 9c6<AC97_23,LDAC,SDAC,CDAC,SPDIF,DRA>
viaide0 at pci0 dev 8 function 0
viaide0: NVIDIA nForce3 250 IDE Controller (rev. 0xa2)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 10 function 0
viaide1: NVIDIA nForce3 250 Serial ATA Controller (rev. 0xa2)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
viaide1: using ioapic0 pin 11 (irq 11) for native-PCI interrupt
atabus2 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus3 at viaide1 channel 1
ppb0 at pci0 dev 11 function 0: Nvidia nForce3 250 AGP (rev. 0xa2)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ppb1 at pci0 dev 14 function 0: Nvidia nForce3 250 PCI-PCI bridge (rev. 0xa2)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
vga0 at pci2 dev 6 function 0: Trident Microsystems product 0x9750 (rev. 0xf3)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
fxp0 at pci2 dev 7 function 0: i82550 Ethernet, rev 16
pci_intr_map: bus 2 dev 7 func 0 pin 4; line 10
pci_intr_map: no MP mapping found
fxp0: interrupting at irq 10
fxp0: Ethernet address 00:07:e9:0a:04:1a
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pchb1 at pci0 dev 24 function 0
pchb1: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 1
pchb2: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 2
pchb3: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb4 at pci0 dev 24 function 3
pchb4: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
ioapic0: enabling
audio0 at auich0: full duplex, independent
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <ST340016A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38165 MB, 77542 cyl, 16 head, 63 sec, 512 bytes/sect x 78163247 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <LITE-ON DVDRW LDW-851S, 2004040100045328, GS0K> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsdisplay0: screen 5 added (80x25, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)