Hi all,

I am trying to get working NetBSD (amd-64 port) in a dual opteron 
system (checkout the dmesg output at the end of this email). 
In the core of the system I have a TYAN Thunder K8S PRO motherboard. 
It comes with thre NICs.  One 100MEthernet and two gigabit ethernets 
(BCM5704C chipset). The computer comes with a 3ware 7506 4 ports 
RAID controller. I have a RAID 5 already running.
I installed NetBSD 2.0_BETA (This iso: ftp://ftp.netbsd.org/pub/
NetBSD/arch/amd64/iso/netbsd-amd64-latest.iso).
Everything seems to work pretty good except the gigabits cards. 
Everytime I try to setup the IP parameters (dhclient or ifconfig
manually) the system gets frozen giving me this error:

fatal protection fault in supervisor mode
trap type 4 code 30b rip ............

Problably this one is not the right place to ask for this but:
I am thinking about updating the sources and recompile the kernel.
Can you please that this is the right way to update to current?:

$ cd /usr/src
$ export CVS_RSH=ssh 
$ cvs update -dP        <-------- Am I updating to current?

I am kind of confuse with the different branches and releases. I didn't
find any document about that. Can you point me about any good document?
Last release is 1.6.2. It should be then two branches, one for security
and important patches (-STABLE) and other one which should be -CURRENT 
which eventually will be 2.0 RELEASE. Is that right?

Thanks for your help in advance,

David.

Dmesg output:
-------------

NetBSD 2.0_BETA (GENERIC.MP) #0: Thu Apr 22 16:55:07 PDT 2004
mthomas@cerealbox.englab.brocade.com:/u2/netbsd-2-0/amd64/obj/sys/arch/amd64/compile/GENERIC.MP
total memory = 3999 MB
avail memory = 3852 MB
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.1) (TYAN     S2882       )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Opteron(tm) Processor 244, 1793.20 MHz
cpu0: features:
e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 1 MB 64b/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully
associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully
associative
cpu0: calibrating local timer
cpu0: apic clock running at 199 MHz
cpu0: 16 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: AMD Opteron(tm) Processor 244, 1793.05 MHz
cpu1: features:
e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu1: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>
cpu1: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu1: L2 cache 1 MB 64b/line 16-way
cpu1: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully
associative
cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully
associative
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type ISA
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
ioapic1 at mainbus0 apid 3 (I/O APIC)
ioapic1: pa 0xfebff000, version 11, 4 pins
ioapic2 at mainbus0 apid 4 (I/O APIC)
ioapic2: pa 0xfebfe000, version 11, 4 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ppb0 at pci0 dev 6 function 0: Advanced Micro Devices AMD8111 I/O Hub
(rev. 0x07)
pci1 at ppb0 bus 3
pci1: i/o space, memory space enabled
ohci0 at pci1 dev 0 function 0: Advanced Micro Devices AMD8111 USB Host
Controller (rev. 0x0b)
ohci0: interrupting at ioapic0 pin 19 (irq 10)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Advanced Micro OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci1 dev 0 function 1: Advanced Micro Devices AMD8111 USB Host
Controller (rev. 0x0b)
ohci1: interrupting at ioapic0 pin 19 (irq 10)
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Advanced Micro OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
satalink0 at pci1 dev 5 function 0
satalink0: Silicon Image SATALink 3114 (rev. 0x02)
satalink0: 33MHz PCI bus
satalink0: bus-master DMA support present
satalink0: using ioapic0 pin 19 (irq 10) for native-PCI interrupt
atabus0 at satalink0 channel 0
atabus1 at satalink0 channel 1
atabus2 at satalink0 channel 2
atabus3 at satalink0 channel 3
vga0 at pci1 dev 6 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
fxp0 at pci1 dev 8 function 0: i82550 Ethernet, rev 16
fxp0: interrupting at ioapic0 pin 18 (irq 11)
fxp0: Ethernet address 00:e0:81:2b:b7:0d
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 7 function 0
pcib0: Advanced Micro Devices AMD8111 LPC Controller (rev. 0x05)
viaide0 at pci0 dev 7 function 1
viaide0: Advanced Micro Devices AMD8111 IDE Controller (rev. 0x03)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus4 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus5 at viaide0 channel 1
Advanced Micro Devices AMD8111 SMBus Controller (SMBus serial bus,
revision 0x02) at pci0 dev 7 function 2 not configured
Advanced Micro Devices AMD8111 ACPI Controller (miscellaneous bridge,
revision 0x05) at pci0 dev 7 function 3 not configured
ppb1 at pci0 dev 10 function 0: Advanced Micro Devices AMD8131 PCI-X
Tunnel (rev. 0x12)
pci2 at ppb1 bus 2
pci2: memory space enabled
bge0 at pci2 dev 9 function 0: Broadcom BCM5704C Dual Gigabit Ethernet
bge0: interrupting at ioapic1 pin 0 (irq 5)
bge0: ASIC BCM5704 A3 (0x2003), Ethernet address 00:e0:81:2c:5d:86
brgphy0 at bge0 phy 1: BCM5704 1000BASE-T media interface, rev. 0
brgphy0: using BCM5704 DSP patch
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FD
X, auto
bge1 at pci2 dev 9 function 1: Broadcom BCM5704C Dual Gigabit Ethernet
bge1: interrupting at ioapic1 pin 1 (irq 9)
bge1: ASIC BCM5704 A3 (0x2003), Ethernet address 00:e0:81:2c:5d:87
brgphy1 at bge1 phy 1: BCM5704 1000BASE-T media interface, rev. 0
brgphy1: using BCM5704 DSP patch
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
aapic0 at pci0 dev 10 function 1: Advanced Micro Devices AMD8131 IO Apic
(rev. 0x01)
ppb2 at pci0 dev 11 function 0: Advanced Micro Devices AMD8131 PCI-X
Tunnel (rev. 0x12)
pci3 at ppb2 bus 1
pci3: i/o space, memory space enabled
twe0 at pci3 dev 3 function 0: 3ware Escalade
twe0: interrupting at ioapic2 pin 0 (irq 5)
twe0: 4 ports, Firmware FE7X 1.05.00.068, BIOS BE7X 1.08.00.048
twe0: Monitor ME7X 1.01.00.040, PCB Rev4    , Achip 3.20    , Pchip
1.30-66
twe0: port 0: WDC WD1200BB-00DWA0                      114473 MB
twe0: port 1: WDC WD1200BB-00GUA0                      114473 MB
twe0: port 2: WDC WD1200BB-00DWA0                      114473 MB
ld0 at twe0 unit 0: 64K stripe RAID5, status: Normal
ld0: 223 GB, 29186 cyl, 255 head, 63 sec, 512 bytes/sect x 468879104
sectors
aapic1 at pci0 dev 11 function 1: Advanced Micro Devices AMD8131 IO Apic
(rev. 0x01)
pchb0 at pci0 dev 24 function 0
pchb0: Advanced Micro Devices AMD64 HyperTransport configuration (rev.
0x00)
pchb1 at pci0 dev 24 function 1
pchb1: Advanced Micro Devices AMD64 Address Map configuration (rev.
0x00)
pchb2 at pci0 dev 24 function 2
pchb2: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 3
pchb3: Advanced Micro Devices AMD64 Miscellaneous configuration (rev.
0x00)
pchb4 at pci0 dev 25 function 0
pchb4: Advanced Micro Devices AMD64 HyperTransport configuration (rev.
0x00)
pchb5 at pci0 dev 25 function 1
pchb5: Advanced Micro Devices AMD64 Address Map configuration (rev.
0x00)
pchb6 at pci0 dev 25 function 2
pchb6: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb7 at pci0 dev 25 function 3
pchb7: Advanced Micro Devices AMD64 Miscellaneous configuration (rev.
0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
ioapic2: enabling
ioapic1: enabling
ioapic0: enabling
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
atapibus0 at atabus4: 2 targets
cd0 at atapibus0 drive 0: <SR244W, , T01A> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using
DMA data
transfers)
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
cpu1: CPU 1 running