Re: successful boot report

[Julian Coleman <jdc%coris.org.uk@localhost>]

Hi,

>   DVA0 would normally be the floppy disk.  Any optical media would 
> normally be DQ[AB]0.  Network devices I think would be E*.

Yep - my PC164LX has:

  >>> show dev
  dka0.0.0.7.0          DKA0            FUJITSU MAP3367NP  0108
  dka100.0.0.7.0        DKA100          FUJITSU MAP3367NP  0108
  dqa0.0.0.11.0         DKA0       RICOH DV D/CDRW MP9060  1.80
  dva0.0.0.0.0          DVA0
  ewa0.0.0.9.0          EWA0            00-40-05-A5-F5-CA
  pka0.7.0.7.0          PKA0                SCSI Bus ID 7

The SCSI card is a Symbios Logic 53c875, the network card a DEC 21140A,
the CD/DVD is ATAPI, and the disks are at ID 0 and 1:

  esiop0 at pci0 dev 7 function 0: Symbios Logic 53c875 (ultra-wide scsi)

  tlp0 at pci0 dev 9 function 0: DECchip 21140A Ethernet, pass 2.2

  cd0 at atapibus0 drive 0: <RICOH DVD/CDRW MP9060, , 1.80> cdrom removable

  sd0 at scsibus0 target 0 lun 0: <FUJITSU, MAP3367NP, 0108> disk fixed
  sd1 at scsibus0 target 1 lun 0: <FUJITSU, MAP3367NP, 0108> disk fixed

I have had an Adaptec 39160 SCSI card in (note that a 29160 does not work),
but that lost against a lightning strike.  The IDE controller is the same
(horrible) chipset that also appears in some Sun machines (U5, U10, etc.):

  cmdide0: CMD Technology PCI0646 (rev. 0x01)

Thanks,

J

-- 
  My other computer also runs NetBSD    /        Sailing at Newbiggin
        http://www.netbsd.org/        /   http://www.newbigginsailingclub.org/