At 3:23 PM -0400 4/14/03, Roland Dowdeswell wrote:
>On 1050338796 seconds since the Beginning of the UNIX epoch
>"Christian von Kleist" wrote:
>>
>
>>Your video card probably has a jumper or DIP switch configuration, so you
>>might have to do some research if you need to change the resolution.
>
>>>  The output of the video card in the alpha said "PBXGA" will it work with
>>>  what you suggest ?
>
>The settings for the DIP switch or wheel are:
>
>	/* 0x0: 1280 x 1024 @ 72Hz */
>	/* 0x1: 1280 x 1024 @ 66Hz */
>	/* 0x2: 1280 x 1024 @ 60Hz */
>	/* 0x3: 1152 x  900 @ 72Hz */
>	/* 0x4: 1600 x 1200 @ 65Hz */
>	/* 0x5: 1024 x  768 @ 70Hz */
>	/* 0x6: 1024 x  768 @ 72Hz */
>	/* 0x7: 1024 x  864 @ 60Hz */
>	/* 0x8: 1024 x  768 @ 60Hz */
>	/* 0x9:  800 x  600 @ 72Hz */
>	/* 0xa:  800 x  600 @ 60Hz */
>	/* 0xb:  640 x  480 @ 72Hz */
>	/* 0xc:  640 x  480 @ 60Hz */
>	/* 0xd: 1280 x 1024 @ 75Hz */
>	/* 0xe: 1280 x 1024 @ 60Hz */
>	/* 0xf: 1600 x 1200 @ 75Hz */
>
>The 1600x1200 modes do not work on the the 8 bit models, the PBXGA-AA
>and the PBXGB-AA (i.e. The PowerStorm 3d30 and ZLXp-E1 disrespectively.)

Hi Roland,
I have the ZLXp-E2 (PBXGA-BA) in my AS200 which is 32 bit, and my 
settings are different than yours, both in the manual and practice. 
My manual lists setting 4 as 1152x900 @ 66, and setting 15 as 
<reserved>. My empirical data suggests that setting 4 is as the 
manual states, and setting 15 is another 1280x1024 (didn't pay 
attention to refresh). As I have a nice big monitor, I would love to 
be able to use 1600x1200 but it doesn't look possible with my 
hardware.

(setting 4)
tga0 at pci0 dev 13 function 0: DC21030 step C, board type T32-08
tga0: 1152 x 900, 32bpp, Bt463 RAMDAC
tga0: interrupting at isa irq 10

Mike
-- 
Bikers don't *DO* taglines.