Hi all,

Updated my AS1200 to Feb. 21 kernel + userland (1.6O, from 1.6I c. October 
2002) and I'm getting the following:

timeout delayed -1
timeout delayed -1
timeout delayed -1
timeout delayed -1
[...]

ad infinitum on my console after boot.  It doesn't interfere with normal 
operations, but it's killing my syslogs.  Any idea what this could be? 
dmesg follows.

Thanks,
Dave

NetBSD 1.6O (TERRAN) #0: Tue Mar  4 14:25:24 UTC 2003
     bard@bsd.nunya.bizness:/raid/src/sys/arch/alpha/compile/obj/TERRAN
AlphaServer 1200 5/533 4MB, 531MHz, s/n NI80901AEW
8192 byte page size, 2 processors.
total memory = 1024 MB
(2072 KB reserved for PROM, 1021 MB used by NetBSD)
avail memory = 947 MB
using 6553 buffers containing 52424 KB of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164A-2
cpu0: VAX FP support, IEEE FP support, Primary Eligible
cpu0: Architecture extensions: 1<BWX>
cpu1 at mainbus0: ID 1, 21164A-2
cpu1: VAX FP support, IEEE FP support
cpu1: processor off-line; multiprocessor support not present in kernel
mcbus0 at mainbus0: 4MB BCache
mcmem0 at mcbus0 mid 1: Memory
mcpcia0 at mcbus0 mid 5: PCI Bridge
mcpcia0: Horse Revision 3, Left Handed Saddle Revision 0, CAP Revision 2
pci0 at mcpcia0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
siop0 at pci0 dev 1 function 0: Symbios Logic 53c810 (fast scsi)
siop0: interrupting at kn300 irq 36
scsibus0 at siop0: 8 targets, 8 luns per target
mcpcia1 at mcbus0 mid 4: PCI Bridge
mcpcia1: Horse Revision 3, Left Handed Saddle Revision 0, CAP Revision 2
pci1 at mcpcia1 bus 0
pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pceb0 at pci1 dev 1 function 0: Intel 82375EB/SB PCI-EISA Bridge (PCEB) 
(rev. 0x15)
vga0 at pci1 dev 2 function 0: S3 ViRGE/DX (rev. 0x01)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
isp0 at pci1 dev 3 function 0: QLogic 1020 Ultra Wide SCSI HBA
isp0: interrupting at kn300 irq 12
scsibus1 at isp0: 16 targets, 8 luns per target
tlp0 at pci1 dev 4 function 0: DECchip 21140A Ethernet, pass 2.2
tlp0: interrupting at kn300 irq 16
tlp0: Ethernet address 00:40:05:41:a4:0e
lxtphy0 at tlp0 phy 0: LXT970 10/100 media interface, rev. 0
lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
eisa0 at pceb0
isa0 at pceb0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
stray kn300 irq 12
raidattach: Asked for 4 units
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
scsibus0: waiting 2 seconds for devices to settle...
siop0: alloc newcdb at PHY addr 0x84ab0000
cd0 at scsibus0 target 5 lun 0: <DEC, RRD46   (C) DEC, 1337> cdrom removable
cd0: sync (100.0ns offset 8), 8-bit (10.000MB/s) transfers
scsibus1: waiting 2 seconds for devices to settle...
stray kn300 irq 12
sd0 at scsibus1 target 0 lun 0: <DEC, RZ1CB-CA (C) DEC, LYJ0> disk fixed
sd0: 4091 MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sect x 8380080 sectors
stray kn300 irq 12
sd0: sync (50.0ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
stray kn300 irq 12
stray kn300 irq 12
sd1 at scsibus1 target 2 lun 0: <DEC, RZ1CB-CA (C) DEC, LYJ0> disk fixed
sd1: 4091 MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sect x 8380080 sectors
stray kn300 irq 12
sd1: sync (50.0ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
stray kn300 irq 12
stray kn300 irq 12
sd2 at scsibus1 target 4 lun 0: <DEC, RZ1CB-CA (C) DEC, LYJ0> disk fixed
sd2: 4091 MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sect x 8380080 sectors
stray kn300 irq 12
sd2: sync (50.0ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
stray kn300 irq 12
WARNING: can't figure what device matches "SCSI 0 3 0 0 0 6000 10201077"
root on sd0a dumps on sd0b
readclock: 3/3/4/15/5/4=>1046790304 (1046790249)
init: copying out path `/sbin/init' 11
sd1: no disk label
raid0: Summary of serial numbers:
12151999 2
raid0: Summary of mod counters:
859007858 2
raid0: Component /dev/sd1c being configured at row: 0 col: 0
          Row: 0 Column: 0 Num Rows: 1 Num Columns: 2
          Version: 1 Serial Number: 12151999 Mod Counter: 859007858
          Clean: No Status: 0
/dev/sd1c is not clean!
raid0: Component /dev/sd2c being configured at row: 0 col: 1
          Row: 0 Column: 1 Num Rows: 1 Num Columns: 2
          Version: 1 Serial Number: 12151999 Mod Counter: 859007858
          Clean: No Status: 0
/dev/sd2c is not clean!
raid0: RAID Level 0
raid0: Components: /dev/sd1c /dev/sd2c
raid0: Total Sectors: 16760000 (8183 MB)
stray kn300 irq 16
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)