> 	With ISA-card plugged in? You must have 'vga* at isa?'. Show
> your dmesg.
> 	Did you try my patch?
> 
Unfortunately, your patch doesn't work. It gives the same panic as
before.

Here's my dmesg (with your patch applied and with a pci video card).

What does consinit: not using prom console mean?

Thanks for your help.

Pavel

[ using 666432 bytes of netbsd ELF symbol table ]
consinit: not using prom console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6_STABLE (ALPHA-$Revision: 1.164.4.2 $) #3: Fri Dec 20 13:39:40 UTC 2002
    root@beta:/usr/obj/kern/BETA
Digital AlphaPC 164LX 599 MHz, s/n 
8192 byte page size, 1 processor.
total memory = 576 MB
(2136 KB reserved for PROM, 573 MB used by NetBSD)
avail memory = 523 MB
using 3685 buffers containing 29480 KB of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164A-2
cpu0: Architecture extensions: 1<BWX>
cia0 at mainbus0: DECchip 2117x Core Logic Chipset (Pyxis), pass 1
cia0: extended capabilities: 1<BWEN>
cia0: using BWX for PCI config access
pci0 at cia0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vga0 at pci0 dev 5 function 0: S3 Trio32/64 (rev. 0x44)
wsdisplay0 at vga0 (kbdmux ignored): console (80x25, vt100 emulation)
gsip0 at pci0 dev 6 function 0: NatSemi DP83820 Gigabit Ethernet, rev 00
gsip0: interrupting at eb164 irq 0
gsip0: Ethernet address 00:04:e2:10:55:16
gsip0: 64-bit PCI slot detected
gphyter0 at gsip0 phy 1: DP83861 1000BASE-T media interface, rev. 1
gphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
gphyter0: strapped to slave mode, pre-C5 BCM5400 compat enabled
gsip1 at pci0 dev 7 function 0: NatSemi DP83820 Gigabit Ethernet, rev 00
gsip1: interrupting at eb164 irq 1
gsip1: Ethernet address 00:04:e2:10:51:aa
gsip1: 64-bit PCI slot detected
gphyter1 at gsip1 phy 1: DP83861 1000BASE-T media interface, rev. 2
gphyter1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
gphyter1: strapped to slave mode, pre-C5 BCM5400 compat enabled
sio0 at pci0 dev 8 function 0: Intel 82378ZB System I/O (SIO) (rev. 0x43)
siop0 at pci0 dev 9 function 0: Symbios Logic 53c895 (ultra2-wide scsi)
siop0: using on-board RAM
siop0: interrupting at eb164 irq 3
scsibus0 at siop0: 16 targets, 8 luns per target
pciide0 at pci0 dev 11 function 0: CMD Technology PCI0646 (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
atapibus0 at pciide0 channel 0: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA CD-ROM XM-6502B, , 1013> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: primary channel interrupting at isa irq 14
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)
isa0 at sio0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux ignored): console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 (mux ignored)
lpt0 at isa0 port 0x3bc-0x3bf irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
isabeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
isapnp0: no ISA Plug 'n Play devices found
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 4 lun 0: <SEAGATE, ST336938LW, 0003> SCSI3 0/direct fixed
sd0: 35242 MB, 56332 cyl, 2 head, 640 sec, 512 bytes/sect x 72176567 sectors
sd0: sync (25.0ns offset 31), 16-bit (80.000MB/s) transfers, tagged queueing
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
root on sd0a dumps on sd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)