Subject: Re: Marking failed RAID 0 drive as not failed without replacement?
To: Paul Mather <firstname.lastname@example.org>
From: Manuel Bouyer <email@example.com>
Date: 09/21/2002 23:12:23
On Sat, Sep 21, 2002 at 03:13:21PM -0400, Paul Mather wrote:
> I have a CCD array that is made up of a RAID 0 (consisting of three
> drives) plus two other miscellaneous drives. On Friday, one of the
> RAID 0 drives apparently failed. I say "apparently" because the CCD
> (and RAID) continues to work, seemingly without error.
> Here's what appeared in my logs:
> sd8(asc1:0:6:0): Check Condition on CDB: 0x28 00 01 0a 8d 40 00 00 40 00
> SENSE KEY: Media Error
> INFO FIELD: 17468771
> ASC/ASCQ: Unrecovered Read Error
> raid0: IO Error. Marking /dev/sd8c as failed.
> raid0: node (R ) returned fail, rolling backward
> raid0: DAG failure: r addr 0x31fa7c0 (52406208) nblk 0x80 (128) buf 0xfffffe0001f84000
> When I do "raidctl -s raid0", part of the output contains the line
> "/dev/sd8c status is: failed. Skipping label." However, between the
Can you post the output of raidctl -s raid0 ?
Manuel Bouyer <firstname.lastname@example.org>