Greetings,

I'm playing with a DEC 3000/700 that has an onboard le0 (at ioasic0) and
le1, 2, and 3 on TC (all three are PMAD-A). I'm running 1.5.2. le0 works
just fine. Can't configure the TC cards. After issuing "ifconfig" for any
of those, I get many "Reg did not settle" messages in my terminal
session and on the serial console. I've read about people having the same
problem and I've never been able to find anyone who has resolved it. Is it
still not fixed?

The error messages also appear in dmesg. Here it is:

### BEGIN
[ preserving 448616 bytes of netbsd ELF symbol table ]
consinit: using prom console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5.2 (GENERIC) #37: Sat Aug 18 10:02:07 MEST 2001
    he@albatross.urc.uninett.no:/usr/src/sys/arch/alpha/compile/GENERIC
DEC 3000 - M700, 225MHz
8192 byte page size, 1 processor.
total memory = 128 MB
(2048 KB reserved for PROM, 126 MB used by NetBSD)
avail memory = 110 MB
using 819 buffers containing 6552 KB of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21064A-3 (pass 2)
tcasic0 at mainbus0
tc0 at tcasic0: 25 MHz clock
ioasic0 at tc0 slot 7 offset 0x0: fast mode
le0 at ioasic0 offset 0xc0000: address 08:00:2b:94:49:4e
le0: 32 receive buffers, 8 transmit buffers
scc0 at ioasic0 offset 0x100000
scc1 at ioasic0 offset 0x180000: console
mcclock0 at ioasic0 offset 0x200000: mc146818 or compatible
AMD79c30 at ioasic0 offset 0x240000 not configured
tcds0 at tc0 slot 6 offset 0x0: TurboChannel Dual SCSI (baseboard)
tcds0: fast mode set for chip 0
asc0 at tcds0 chip 0: NCR53C94, 40MHz, SCSI ID 7
scsibus0 at asc0: 8 targets, 8 luns per target
asc1 at tcds0 chip 1: NCR53C94, 40MHz, SCSI ID 7
scsibus1 at asc1: 8 targets, 8 luns per target
le1 at tc0 slot 5 offset 0x0le: Reg did not settle (to x0): x181
: address 08:00:2b:95:b5:de
le1: 32 receive buffers, 8 transmit buffers
le2 at tc0 slot 4 offset 0x0le: Reg did not settle (to x0): x181
: address 08:00:2b:95:b6:64
le2: 32 receive buffers, 8 transmit buffers
le3 at tc0 slot 3 offset 0x0le: Reg did not settle (to x0): x181
: address 08:00:2b:95:ab:df
le3: 32 receive buffers, 8 transmit buffers
scsibus0: waiting 2 seconds for devices to settle...
probe(asc0:0:0): max sync rate 10.00MB/s
sd0 at scsibus0 target 0 lun 0: <QUANTUM, FIREBALL1080S, 1Q09> SCSI2
0/direct fixed
sd0: 1042 MB, 3835 cyl, 4 head, 139 sec, 512 bytes/sect x 2134305 sectors
probe(asc0:3:0): max sync rate 10.00MB/s
cd0 at scsibus0 target 3 lun 0: <MATSHITA, CD-ROM CR-506, 8S05> SCSI2
5/cdrom removable
scsibus1: waiting 2 seconds for devices to settle...
root on sd0a dumps on sd0b
root file system type: ffs
### END

Andrey